[PATCH v2] cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable

[Arvind Yadav <arvind.yadav.cs@gmail.com>]

Here, Clock enable can failed. So adding an error check for
clk_prepare_enable.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/cpufreq/kirkwood-cpufreq.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c
index 1b9bcd7..c2dd43f 100644
--- a/drivers/cpufreq/kirkwood-cpufreq.c
+++ b/drivers/cpufreq/kirkwood-cpufreq.c
@@ -127,7 +127,12 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev)
 		return PTR_ERR(priv.cpu_clk);
 	}
 
-	clk_prepare_enable(priv.cpu_clk);
+	err = clk_prepare_enable(priv.cpu_clk);
+	if (err) {
+		dev_err(priv.dev, "Unable to prepare cpuclk\n");
+		return err;
+	}
+
 	kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
 
 	priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
@@ -137,7 +142,11 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev)
 		goto out_cpu;
 	}
 
-	clk_prepare_enable(priv.ddr_clk);
+	err = clk_prepare_enable(priv.ddr_clk);
+	if (err) {
+		dev_err(priv.dev, "Unable to prepare ddrclk\n");
+		goto out_cpu;
+	}
 	kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
 
 	priv.powersave_clk = of_clk_get_by_name(np, "powersave");
@@ -146,7 +155,11 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev)
 		err = PTR_ERR(priv.powersave_clk);
 		goto out_ddr;
 	}
-	clk_prepare_enable(priv.powersave_clk);
+	err = clk_prepare_enable(priv.powersave_clk);
+	if (err) {
+		dev_err(priv.dev, "Unable to prepare powersave clk\n");
+		goto out_ddr;
+	}
 
 	of_node_put(np);
 	np = NULL;
-- 
1.9.1