From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: rui.zhang@intel.com, edubezval@gmail.com
Cc: daniel.lezcano@linaro.org, linux-pm@vger.kernel.org,
kevin.wangtao@linaro.org, leo.yan@linaro.org,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH 10/13] thermal/drivers/hisi: Rename and remove unused field
Date: Wed, 30 Aug 2017 10:47:34 +0200 [thread overview]
Message-ID: <1504082857-21702-10-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1504082857-21702-1-git-send-email-daniel.lezcano@linaro.org>
Rename the 'sensors' field to 'sensor' as we describe only one sensor.
Remove the 'sensor_temp' as it is no longer used.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/hisi_thermal.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index b038d8a..68b625c 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -47,8 +47,6 @@
struct hisi_thermal_sensor {
struct hisi_thermal_data *thermal;
struct thermal_zone_device *tzd;
-
- long sensor_temp;
uint32_t id;
uint32_t thres_temp;
};
@@ -57,9 +55,9 @@ struct hisi_thermal_data {
struct mutex thermal_lock; /* protects register data */
struct platform_device *pdev;
struct clk *clk;
- struct hisi_thermal_sensor sensors;
- int irq;
+ struct hisi_thermal_sensor sensor;
void __iomem *regs;
+ int irq;
};
/*
@@ -229,7 +227,7 @@ static const struct thermal_zone_of_device_ops hisi_of_thermal_ops = {
static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
{
struct hisi_thermal_data *data = dev;
- struct hisi_thermal_sensor *sensor = &data->sensors;
+ struct hisi_thermal_sensor *sensor = &data->sensor;
int temp;
hisi_thermal_alarm_clear(data->regs, 1);
@@ -240,7 +238,7 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
dev_crit(&data->pdev->dev, "THERMAL ALARM: %d > %d\n",
temp, sensor->thres_temp);
- thermal_zone_device_update(data->sensors.tzd,
+ thermal_zone_device_update(data->sensor.tzd,
THERMAL_EVENT_UNSPECIFIED);
} else if (temp < sensor->thres_temp) {
@@ -303,7 +301,7 @@ static int hisi_thermal_setup(struct hisi_thermal_data *data)
{
struct hisi_thermal_sensor *sensor;
- sensor = &data->sensors;
+ sensor = &data->sensor;
/* disable module firstly */
hisi_thermal_reset_enable(data->regs, 0);
@@ -376,7 +374,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
}
ret = hisi_thermal_register_sensor(pdev, data,
- &data->sensors,
+ &data->sensor,
HISI_DEFAULT_SENSOR);
if (ret) {
dev_err(&pdev->dev, "failed to register thermal sensor: %d\n",
@@ -398,7 +396,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
return ret;
}
- hisi_thermal_toggle_sensor(&data->sensors, true);
+ hisi_thermal_toggle_sensor(&data->sensor, true);
return 0;
}
@@ -406,7 +404,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
static int hisi_thermal_remove(struct platform_device *pdev)
{
struct hisi_thermal_data *data = platform_get_drvdata(pdev);
- struct hisi_thermal_sensor *sensor = &data->sensors;
+ struct hisi_thermal_sensor *sensor = &data->sensor;
hisi_thermal_toggle_sensor(sensor, false);
hisi_thermal_disable_sensor(data);
--
2.7.4
next prev parent reply other threads:[~2017-08-30 8:47 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-30 8:47 [PATCH 01/13] thermal/drivers/hisi: Fix missing interrupt enablement Daniel Lezcano
2017-08-30 8:47 ` [PATCH 02/13] thermal/drivers/hisi: Remove the multiple sensors support Daniel Lezcano
2017-09-01 14:05 ` Leo Yan
2017-09-01 20:48 ` Daniel Lezcano
2017-08-30 8:47 ` [PATCH 03/13] thermal/drivers/hisi: Fix kernel panic on alarm interrupt Daniel Lezcano
2017-09-01 14:14 ` Leo Yan
2017-08-30 8:47 ` [PATCH 04/13] thermal/drivers/hisi: Simplify the temperature/step computation Daniel Lezcano
2017-09-01 14:24 ` Leo Yan
2017-08-30 8:47 ` [PATCH 05/13] thermal/drivers/hisi: Fix multiple alarm interrupts firing Daniel Lezcano
2017-09-01 14:40 ` Leo Yan
2017-08-30 8:47 ` [PATCH 06/13] thermal/drivers/hisi: Remove pointless lock Daniel Lezcano
2017-09-01 14:44 ` Leo Yan
2017-08-30 8:47 ` [PATCH 07/13] thermal/drivers/hisi: Encapsulate register writes into helpers Daniel Lezcano
2017-09-02 2:09 ` Leo Yan
2017-09-02 2:17 ` Leo Yan
2017-08-30 8:47 ` [PATCH 08/13] thermal/drivers/hisi: Fix configuration register setting Daniel Lezcano
2017-09-02 2:54 ` Leo Yan
2017-09-02 8:34 ` Daniel Lezcano
2017-09-04 0:58 ` Leo Yan
2017-09-04 9:16 ` Daniel Lezcano
2017-08-30 8:47 ` [PATCH 09/13] thermal/drivers/hisi: Remove costly sensor inspection Daniel Lezcano
2017-09-02 3:29 ` Leo Yan
2017-09-02 13:10 ` Daniel Lezcano
2017-09-04 0:50 ` Leo Yan
2017-09-04 11:29 ` Daniel Lezcano
2017-09-04 14:30 ` Leo Yan
2017-08-30 8:47 ` Daniel Lezcano [this message]
2017-09-02 3:36 ` [PATCH 10/13] thermal/drivers/hisi: Rename and remove unused field Leo Yan
2017-08-30 8:47 ` [PATCH 11/13] thermal/drivers/hisi: Convert long to int Daniel Lezcano
2017-09-02 3:41 ` Leo Yan
2017-08-30 8:47 ` [PATCH 12/13] thermal/drivers/hisi: Remove thermal data back pointer Daniel Lezcano
2017-08-30 8:47 ` [PATCH 13/13] thermal/drivers/hisi: Remove mutex_lock in the code Daniel Lezcano
2017-09-02 4:04 ` Leo Yan
2017-09-02 13:11 ` Daniel Lezcano
2017-09-01 8:31 ` [PATCH 01/13] thermal/drivers/hisi: Fix missing interrupt enablement Leo Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1504082857-21702-10-git-send-email-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=edubezval@gmail.com \
--cc=kevin.wangtao@linaro.org \
--cc=leo.yan@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).