From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Lezcano Subject: [PATCH V2 01/13] thermal/drivers/hisi: Fix missing interrupt enablement Date: Mon, 4 Sep 2017 21:56:00 +0200 Message-ID: <1504554972-2624-1-git-send-email-daniel.lezcano@linaro.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: rui.zhang@intel.com, edubezval@gmail.com Cc: daniel.lezcano@linaro.org, linux-pm@vger.kernel.org, kevin.wangtao@linaro.org, leo.yan@linaro.org, linux-kernel@vger.kernel.org List-Id: linux-pm@vger.kernel.org The interrupt for the temperature threshold is not enabled at the end of the probe function, enable it after the setup is complete. On the other side, the irq_enabled is not correctly set as we are checking if the interrupt is masked where 'yes' means irq_enabled=false. irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED, &data->irq_enabled); As we are always enabling the interrupt, it is pointless to check if the interrupt is masked or not, just set irq_enabled to 'true'. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan --- drivers/thermal/hisi_thermal.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index bd3572c..8381696 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -345,8 +345,7 @@ static int hisi_thermal_probe(struct platform_device *pdev) } hisi_thermal_enable_bind_irq_sensor(data); - irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED, - &data->irq_enabled); + data->irq_enabled = true; for (i = 0; i < HISI_MAX_SENSORS; ++i) { ret = hisi_thermal_register_sensor(pdev, data, @@ -358,6 +357,8 @@ static int hisi_thermal_probe(struct platform_device *pdev) hisi_thermal_toggle_sensor(&data->sensors[i], true); } + enable_irq(data->irq); + return 0; } -- 2.7.4