From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: edubezval@gmail.com, rui.zhang@intel.com
Cc: linux-pm@vger.kernel.org, leo.yan@linaro.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 10/18] thermal/drivers/hisi: Rename and remove unused field
Date: Thu, 19 Oct 2017 19:05:52 +0200 [thread overview]
Message-ID: <1508432760-17847-10-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1508432760-17847-1-git-send-email-daniel.lezcano@linaro.org>
Rename the 'sensors' field to 'sensor' as we describe only one sensor.
Remove the 'sensor_temp' as it is no longer used.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
---
drivers/thermal/hisi_thermal.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index c7bdcfe..baa3853 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -49,8 +49,6 @@
struct hisi_thermal_sensor {
struct hisi_thermal_data *thermal;
struct thermal_zone_device *tzd;
-
- long sensor_temp;
uint32_t id;
uint32_t thres_temp;
};
@@ -59,9 +57,9 @@ struct hisi_thermal_data {
struct mutex thermal_lock; /* protects register data */
struct platform_device *pdev;
struct clk *clk;
- struct hisi_thermal_sensor sensors;
- int irq;
+ struct hisi_thermal_sensor sensor;
void __iomem *regs;
+ int irq;
};
/*
@@ -233,7 +231,7 @@ static struct thermal_zone_of_device_ops hisi_of_thermal_ops = {
static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
{
struct hisi_thermal_data *data = dev;
- struct hisi_thermal_sensor *sensor = &data->sensors;
+ struct hisi_thermal_sensor *sensor = &data->sensor;
int temp;
hisi_thermal_alarm_clear(data->regs, 1);
@@ -244,7 +242,7 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
dev_crit(&data->pdev->dev, "THERMAL ALARM: %d > %d\n",
temp, sensor->thres_temp);
- thermal_zone_device_update(data->sensors.tzd,
+ thermal_zone_device_update(data->sensor.tzd,
THERMAL_EVENT_UNSPECIFIED);
} else if (temp < sensor->thres_temp) {
@@ -307,7 +305,7 @@ static int hisi_thermal_setup(struct hisi_thermal_data *data)
{
struct hisi_thermal_sensor *sensor;
- sensor = &data->sensors;
+ sensor = &data->sensor;
/* disable module firstly */
hisi_thermal_reset_enable(data->regs, 0);
@@ -380,7 +378,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
}
ret = hisi_thermal_register_sensor(pdev, data,
- &data->sensors,
+ &data->sensor,
HISI_DEFAULT_SENSOR);
if (ret) {
dev_err(&pdev->dev, "failed to register thermal sensor: %d\n",
@@ -402,7 +400,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
return ret;
}
- hisi_thermal_toggle_sensor(&data->sensors, true);
+ hisi_thermal_toggle_sensor(&data->sensor, true);
return 0;
}
@@ -410,7 +408,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
static int hisi_thermal_remove(struct platform_device *pdev)
{
struct hisi_thermal_data *data = platform_get_drvdata(pdev);
- struct hisi_thermal_sensor *sensor = &data->sensors;
+ struct hisi_thermal_sensor *sensor = &data->sensor;
hisi_thermal_toggle_sensor(sensor, false);
hisi_thermal_disable_sensor(data);
--
2.7.4
next prev parent reply other threads:[~2017-10-19 17:08 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-19 17:05 [GIT PULL] thermal: new material for hikey for 4.15 #2 Daniel Lezcano
2017-10-19 17:05 ` [PATCH 01/18] thermal/drivers/hisi: Fix missing interrupt enablement Daniel Lezcano
2017-10-19 17:05 ` [PATCH 02/18] thermal/drivers/hisi: Remove the multiple sensors support Daniel Lezcano
2017-10-19 17:05 ` [PATCH 03/18] thermal/drivers/hisi: Fix kernel panic on alarm interrupt Daniel Lezcano
2017-10-19 17:05 ` [PATCH 04/18] thermal/drivers/hisi: Simplify the temperature/step computation Daniel Lezcano
2017-10-19 17:05 ` [PATCH 05/18] thermal/drivers/hisi: Fix multiple alarm interrupts firing Daniel Lezcano
2017-10-19 17:05 ` [PATCH 06/18] thermal/drivers/hisi: Remove pointless lock Daniel Lezcano
2017-10-19 17:05 ` [PATCH 07/18] thermal/drivers/hisi: Encapsulate register writes into helpers Daniel Lezcano
2017-10-19 17:05 ` [PATCH 08/18] thermal/drivers/hisi: Fix configuration register setting Daniel Lezcano
2017-10-19 17:05 ` [PATCH 09/18] thermal/drivers/hisi: Remove costly sensor inspection Daniel Lezcano
2017-10-19 17:05 ` Daniel Lezcano [this message]
2017-10-19 17:05 ` [PATCH 11/18] thermal/drivers/hisi: Convert long to int Daniel Lezcano
2017-10-19 17:05 ` [PATCH 12/18] thermal/drivers/hisi: Remove thermal data back pointer Daniel Lezcano
2017-10-19 17:05 ` [PATCH 13/18] thermal/drivers/hisi: Remove mutex_lock in the code Daniel Lezcano
2017-10-19 17:05 ` [PATCH 14/18] thermal/drivers/hisi: Move the clk setup in the corresponding functions Daniel Lezcano
2017-10-19 17:05 ` [PATCH 15/18] thermal/drivers/hisi: Use round up step value Daniel Lezcano
2017-10-19 17:05 ` [PATCH 16/18] thermal/drivers/step_wise: Fix temperature regulation misbehavior Daniel Lezcano
2017-10-19 17:05 ` [PATCH 17/18] thermal/drivers/generic-iio-adc: Switch tz request to devm version Daniel Lezcano
2017-10-19 17:06 ` [PATCH 18/18] thermal/drivers/qcom-spmi: Use devm_iio_channel_get Daniel Lezcano
2017-10-20 1:52 ` [PATCH 01/18] thermal/drivers/hisi: Fix missing interrupt enablement Eduardo Valentin
2017-10-20 6:35 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508432760-17847-10-git-send-email-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=edubezval@gmail.com \
--cc=leo.yan@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).