From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: edubezval@gmail.com, rui.zhang@intel.com
Cc: linux-pm@vger.kernel.org, leo.yan@linaro.org,
linux-kernel@vger.kernel.org,
Kevin Wangtao <kevin.wangtao@linaro.org>
Subject: [PATCH 14/18] thermal/drivers/hisi: Move the clk setup in the corresponding functions
Date: Thu, 19 Oct 2017 19:05:56 +0200 [thread overview]
Message-ID: <1508432760-17847-14-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1508432760-17847-1-git-send-email-daniel.lezcano@linaro.org>
From: Kevin Wangtao <kevin.wangtao@linaro.org>
The sensor's clock is enabled and disabled outside of the probe and
disable function. Moving the corresponding action in the
hisi_thermal_setup() and hisi_thermal_disable_sensor(), factors out
some lines of code and makes the code more symmetric.
Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/hisi_thermal.c | 29 +++++++++--------------------
1 file changed, 9 insertions(+), 20 deletions(-)
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 8d1a8be..b9e4a9a 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -203,6 +203,8 @@ static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data)
hisi_thermal_enable(data->regs, 0);
hisi_thermal_alarm_enable(data->regs, 0);
hisi_thermal_reset_enable(data->regs, 0);
+
+ clk_disable_unprepare(data->clk);
}
static int hisi_thermal_get_temp(void *__data, int *temp)
@@ -297,9 +299,13 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
static int hisi_thermal_setup(struct hisi_thermal_data *data)
{
- struct hisi_thermal_sensor *sensor;
+ struct hisi_thermal_sensor *sensor = &data->sensor;
+ int ret;
- sensor = &data->sensor;
+ /* enable clock for tsensor */
+ ret = clk_prepare_enable(data->clk);
+ if (ret)
+ return ret;
/* disable module firstly */
hisi_thermal_reset_enable(data->regs, 0);
@@ -363,13 +369,6 @@ static int hisi_thermal_probe(struct platform_device *pdev)
return ret;
}
- /* enable clock for thermal */
- ret = clk_prepare_enable(data->clk);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
- return ret;
- }
-
ret = hisi_thermal_register_sensor(pdev, data,
&data->sensor,
HISI_DEFAULT_SENSOR);
@@ -405,7 +404,6 @@ static int hisi_thermal_remove(struct platform_device *pdev)
hisi_thermal_toggle_sensor(sensor, false);
hisi_thermal_disable_sensor(data);
- clk_disable_unprepare(data->clk);
return 0;
}
@@ -417,23 +415,14 @@ static int hisi_thermal_suspend(struct device *dev)
hisi_thermal_disable_sensor(data);
- clk_disable_unprepare(data->clk);
-
return 0;
}
static int hisi_thermal_resume(struct device *dev)
{
struct hisi_thermal_data *data = dev_get_drvdata(dev);
- int ret;
- ret = clk_prepare_enable(data->clk);
- if (ret)
- return ret;
-
- hisi_thermal_setup(data);
-
- return 0;
+ return hisi_thermal_setup(data);
}
#endif
--
2.7.4
next prev parent reply other threads:[~2017-10-19 17:05 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-19 17:05 [GIT PULL] thermal: new material for hikey for 4.15 #2 Daniel Lezcano
2017-10-19 17:05 ` [PATCH 01/18] thermal/drivers/hisi: Fix missing interrupt enablement Daniel Lezcano
2017-10-19 17:05 ` [PATCH 02/18] thermal/drivers/hisi: Remove the multiple sensors support Daniel Lezcano
2017-10-19 17:05 ` [PATCH 03/18] thermal/drivers/hisi: Fix kernel panic on alarm interrupt Daniel Lezcano
2017-10-19 17:05 ` [PATCH 04/18] thermal/drivers/hisi: Simplify the temperature/step computation Daniel Lezcano
2017-10-19 17:05 ` [PATCH 05/18] thermal/drivers/hisi: Fix multiple alarm interrupts firing Daniel Lezcano
2017-10-19 17:05 ` [PATCH 06/18] thermal/drivers/hisi: Remove pointless lock Daniel Lezcano
2017-10-19 17:05 ` [PATCH 07/18] thermal/drivers/hisi: Encapsulate register writes into helpers Daniel Lezcano
2017-10-19 17:05 ` [PATCH 08/18] thermal/drivers/hisi: Fix configuration register setting Daniel Lezcano
2017-10-19 17:05 ` [PATCH 09/18] thermal/drivers/hisi: Remove costly sensor inspection Daniel Lezcano
2017-10-19 17:05 ` [PATCH 10/18] thermal/drivers/hisi: Rename and remove unused field Daniel Lezcano
2017-10-19 17:05 ` [PATCH 11/18] thermal/drivers/hisi: Convert long to int Daniel Lezcano
2017-10-19 17:05 ` [PATCH 12/18] thermal/drivers/hisi: Remove thermal data back pointer Daniel Lezcano
2017-10-19 17:05 ` [PATCH 13/18] thermal/drivers/hisi: Remove mutex_lock in the code Daniel Lezcano
2017-10-19 17:05 ` Daniel Lezcano [this message]
2017-10-19 17:05 ` [PATCH 15/18] thermal/drivers/hisi: Use round up step value Daniel Lezcano
2017-10-19 17:05 ` [PATCH 16/18] thermal/drivers/step_wise: Fix temperature regulation misbehavior Daniel Lezcano
2017-10-19 17:05 ` [PATCH 17/18] thermal/drivers/generic-iio-adc: Switch tz request to devm version Daniel Lezcano
2017-10-19 17:06 ` [PATCH 18/18] thermal/drivers/qcom-spmi: Use devm_iio_channel_get Daniel Lezcano
2017-10-20 1:52 ` [PATCH 01/18] thermal/drivers/hisi: Fix missing interrupt enablement Eduardo Valentin
2017-10-20 6:35 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508432760-17847-14-git-send-email-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=edubezval@gmail.com \
--cc=kevin.wangtao@linaro.org \
--cc=leo.yan@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).