From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: edubezval@gmail.com
Cc: daniel.lezcano@linaro.org, rui.zhang@intel.com,
kevin.wangtao@linaro.org, leo.yan@linaro.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH V2 3/4] thermal/drivers/hisi: Prepare to add support for other hisi platforms
Date: Fri, 20 Oct 2017 17:11:06 +0200 [thread overview]
Message-ID: <1508512267-18302-4-git-send-email-daniel.lezcano@linaro.org> (raw)
In-Reply-To: <1508512267-18302-1-git-send-email-daniel.lezcano@linaro.org>
From: Kevin Wangtao <kevin.wangtao@linaro.org>
For platform compatibility, add the tsensor ops to a thermal data
structure. Each platform has its own probe function to register proper
tsensor ops function to the pointer, platform related resource request
are also implemented in the platform probe function.
Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/hisi_thermal.c | 132 +++++++++++++++++++++++++++--------------
1 file changed, 87 insertions(+), 45 deletions(-)
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index a0c0bb9..98a4403 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/of_device.h>
#include "thermal_core.h"
@@ -30,7 +31,7 @@
#define HI6220_TEMP0_TH (0x4)
#define HI6220_TEMP0_RST_TH (0x8)
#define HI6220_TEMP0_CFG (0xC)
-#define HI6220_TEMP0_CFG_SS_MSK (0xF000)
+#define HI6220_TEMP0_CFG_SS_MSK (0xF000)
#define HI6220_TEMP0_CFG_HDAK_MSK (0x30)
#define HI6220_TEMP0_EN (0x10)
#define HI6220_TEMP0_INT_EN (0x14)
@@ -41,7 +42,7 @@
#define HI6220_TEMP_BASE (-60000)
#define HI6220_TEMP_RESET (100000)
#define HI6220_TEMP_STEP (785)
-#define HI6220_TEMP_LAG (3500)
+#define HI6220_TEMP_LAG (3500)
#define HI6220_DEFAULT_SENSOR 2
@@ -52,6 +53,10 @@ struct hisi_thermal_sensor {
};
struct hisi_thermal_data {
+ int (*get_temp)(struct hisi_thermal_data *data);
+ int (*enable_sensor)(struct hisi_thermal_data *data);
+ int (*disable_sensor)(struct hisi_thermal_data *data);
+ int (*irq_handler)(struct hisi_thermal_data *data);
struct platform_device *pdev;
struct clk *clk;
struct hisi_thermal_sensor sensor;
@@ -192,7 +197,18 @@ static inline void hi6220_thermal_hdak_set(void __iomem *addr, int value)
(value << 4), addr + HI6220_TEMP0_CFG);
}
-static void hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
+static int hi6220_thermal_irq_handler(struct hisi_thermal_data *data)
+{
+ hi6220_thermal_alarm_clear(data->regs, 1);
+ return 0;
+}
+
+static int hi6220_thermal_get_temp(struct hisi_thermal_data *data)
+{
+ return hi6220_thermal_get_temperature(data->regs);
+}
+
+static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
{
/* disable sensor module */
hi6220_thermal_enable(data->regs, 0);
@@ -200,6 +216,8 @@ static void hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
hi6220_thermal_reset_enable(data->regs, 0);
clk_disable_unprepare(data->clk);
+
+ return 0;
}
static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data)
@@ -240,12 +258,48 @@ static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data)
return 0;
}
+static int hi6220_thermal_probe(struct hisi_thermal_data *data)
+{
+ struct platform_device *pdev = data->pdev;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int ret;
+
+ data->get_temp = hi6220_thermal_get_temp;
+ data->enable_sensor = hi6220_thermal_enable_sensor;
+ data->disable_sensor = hi6220_thermal_disable_sensor;
+ data->irq_handler = hi6220_thermal_irq_handler;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(data->regs)) {
+ dev_err(dev, "failed to get io address\n");
+ return PTR_ERR(data->regs);
+ }
+
+ data->clk = devm_clk_get(dev, "thermal_clk");
+ if (IS_ERR(data->clk)) {
+ ret = PTR_ERR(data->clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get thermal clk: %d\n", ret);
+ return ret;
+ }
+
+ data->irq = platform_get_irq(pdev, 0);
+ if (data->irq < 0)
+ return data->irq;
+
+ data->sensor.id = HI6220_DEFAULT_SENSOR;
+
+ return 0;
+}
+
static int hisi_thermal_get_temp(void *__data, int *temp)
{
struct hisi_thermal_data *data = __data;
struct hisi_thermal_sensor *sensor = &data->sensor;
- *temp = hi6220_thermal_get_temperature(data->regs);
+ *temp = data->get_temp(data);
dev_dbg(&data->pdev->dev, "id=%d, temp=%d, thres=%d\n",
sensor->id, *temp, sensor->thres_temp);
@@ -263,7 +317,7 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
struct hisi_thermal_sensor *sensor = &data->sensor;
int temp = 0;
- hi6220_thermal_alarm_clear(data->regs, 1);
+ data->irq_handler(data);
hisi_thermal_get_temp(data, &temp);
@@ -284,14 +338,11 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
static int hisi_thermal_register_sensor(struct platform_device *pdev,
struct hisi_thermal_data *data,
- struct hisi_thermal_sensor *sensor,
- int index)
+ struct hisi_thermal_sensor *sensor)
{
int ret, i;
const struct thermal_trip *trip;
- sensor->id = index;
-
sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
sensor->id, data,
&hisi_of_thermal_ops);
@@ -316,7 +367,7 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
}
static const struct of_device_id of_hisi_thermal_match[] = {
- { .compatible = "hisilicon,tsensor" },
+ { .compatible = "hisilicon,tsensor", .data = hi6220_thermal_probe },
{ /* end */ }
};
MODULE_DEVICE_TABLE(of, of_hisi_thermal_match);
@@ -333,58 +384,48 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
static int hisi_thermal_probe(struct platform_device *pdev)
{
struct hisi_thermal_data *data;
- struct resource *res;
+ int (*platform_probe)(struct hisi_thermal_data *);
+ struct device *dev = &pdev->dev;
int ret;
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->pdev = pdev;
+ platform_set_drvdata(pdev, data);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- data->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(data->regs)) {
- dev_err(&pdev->dev, "failed to get io address\n");
- return PTR_ERR(data->regs);
+ platform_probe = of_device_get_match_data(dev);
+ if (!platform_probe) {
+ dev_err(dev, "failed to get probe func\n");
+ return -EINVAL;
}
- data->irq = platform_get_irq(pdev, 0);
- if (data->irq < 0)
- return data->irq;
-
- platform_set_drvdata(pdev, data);
-
- data->clk = devm_clk_get(&pdev->dev, "thermal_clk");
- if (IS_ERR(data->clk)) {
- ret = PTR_ERR(data->clk);
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "failed to get thermal clk: %d\n", ret);
+ ret = platform_probe(data);
+ if (ret)
return ret;
- }
ret = hisi_thermal_register_sensor(pdev, data,
- &data->sensor,
- HI6220_DEFAULT_SENSOR);
+ &data->sensor);
if (ret) {
- dev_err(&pdev->dev, "failed to register thermal sensor: %d\n",
- ret);
+ dev_err(dev, "failed to register thermal sensor: %d\n", ret);
return ret;
}
- ret = hi6220_thermal_enable_sensor(data);
+ ret = data->enable_sensor(data);
if (ret) {
- dev_err(&pdev->dev, "Failed to setup the sensor: %d\n", ret);
+ dev_err(dev, "Failed to setup the sensor: %d\n", ret);
return ret;
}
- ret = devm_request_threaded_irq(&pdev->dev, data->irq, NULL,
- hisi_thermal_alarm_irq_thread,
- IRQF_ONESHOT, "hisi_thermal", data);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
- return ret;
+ if (data->irq) {
+ ret = devm_request_threaded_irq(dev, data->irq, NULL,
+ hisi_thermal_alarm_irq_thread,
+ IRQF_ONESHOT, "hisi_thermal", data);
+ if (ret < 0) {
+ dev_err(dev, "failed to request alarm irq: %d\n", ret);
+ return ret;
+ }
}
hisi_thermal_toggle_sensor(&data->sensor, true);
@@ -398,7 +439,8 @@ static int hisi_thermal_remove(struct platform_device *pdev)
struct hisi_thermal_sensor *sensor = &data->sensor;
hisi_thermal_toggle_sensor(sensor, false);
- hi6220_thermal_disable_sensor(data);
+
+ data->disable_sensor(data);
return 0;
}
@@ -408,7 +450,7 @@ static int hisi_thermal_suspend(struct device *dev)
{
struct hisi_thermal_data *data = dev_get_drvdata(dev);
- hi6220_thermal_disable_sensor(data);
+ data->disable_sensor(data);
return 0;
}
@@ -417,7 +459,7 @@ static int hisi_thermal_resume(struct device *dev)
{
struct hisi_thermal_data *data = dev_get_drvdata(dev);
- return hi6220_thermal_enable_sensor(data);
+ return data->enable_sensor(data);
}
#endif
--
2.7.4
next prev parent reply other threads:[~2017-10-20 15:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-20 15:11 [PATCH V2 0/4] thermal/drivers/hisi: Add hi3660 thermal driver support Daniel Lezcano
2017-10-20 15:11 ` [PATCH V2 1/4] thermal/drivers/hisi: Put platform code together Daniel Lezcano
2017-10-20 15:11 ` [PATCH V2 2/4] thermal/drivers/hisi: Add platform prefix to function name Daniel Lezcano
2017-10-20 15:11 ` Daniel Lezcano [this message]
2017-10-20 20:58 ` [PATCH V2 3/4] thermal/drivers/hisi: Prepare to add support for other hisi platforms Eduardo Valentin
2017-10-21 8:14 ` Daniel Lezcano
2017-10-21 16:42 ` Eduardo Valentin
[not found] ` <CAKnoXLzieT2RwaVr9_Oj6nxsX+CSd_o=uJjxWbdg28p783e72w@mail.gmail.com>
2017-10-21 19:08 ` Eduardo Valentin
2017-10-21 19:58 ` Daniel Lezcano
2017-10-22 8:55 ` Daniel Lezcano
2017-10-20 15:11 ` [PATCH V2 4/4] thermal/drivers/hisi: Add support for hi3660 SoC Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508512267-18302-4-git-send-email-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=edubezval@gmail.com \
--cc=kevin.wangtao@linaro.org \
--cc=leo.yan@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).