From: Adrian Hunter <adrian.hunter@intel.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Linux PM <linux-pm@vger.kernel.org>,
linux-mmc <linux-mmc@vger.kernel.org>,
Haridhar Kalvala <haridhar.kalvala@intel.com>
Subject: [PATCH RESEND 1/9] mmc: sdhci-pci: Stop calling sdhci_enable_irq_wakeups()
Date: Tue, 9 Jan 2018 09:52:18 +0200 [thread overview]
Message-ID: <1515484346-800-2-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1515484346-800-1-git-send-email-adrian.hunter@intel.com>
sdhci_enable_irq_wakeups() is already called by sdhci_suspend_host() so
sdhci-pci should not need to call it. However sdhci_suspend_host() only
calls it if wakeups are enabled, and sdhci-pci does not enable them until
after calling sdhci_suspend_host(). So move the calls to
sdhci_pci_init_wakeup() before calling sdhci_suspend_host(), and
stop calling sdhci_enable_irq_wakeups(). That results in some
simplification because sdhci_pci_suspend_host() and
__sdhci_pci_suspend_host() no longer need to be separate functions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-pci-core.c | 58 ++++++++++++++-------------------------
1 file changed, 21 insertions(+), 37 deletions(-)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index c5b229b46314..1711b1815630 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -38,10 +38,29 @@
static void sdhci_pci_hw_reset(struct sdhci_host *host);
#ifdef CONFIG_PM_SLEEP
-static int __sdhci_pci_suspend_host(struct sdhci_pci_chip *chip)
+static int sdhci_pci_init_wakeup(struct sdhci_pci_chip *chip)
+{
+ mmc_pm_flag_t pm_flags = 0;
+ int i;
+
+ for (i = 0; i < chip->num_slots; i++) {
+ struct sdhci_pci_slot *slot = chip->slots[i];
+
+ if (slot)
+ pm_flags |= slot->host->mmc->pm_flags;
+ }
+
+ return device_init_wakeup(&chip->pdev->dev,
+ (pm_flags & MMC_PM_KEEP_POWER) &&
+ (pm_flags & MMC_PM_WAKE_SDIO_IRQ));
+}
+
+static int sdhci_pci_suspend_host(struct sdhci_pci_chip *chip)
{
int i, ret;
+ sdhci_pci_init_wakeup(chip);
+
for (i = 0; i < chip->num_slots; i++) {
struct sdhci_pci_slot *slot = chip->slots[i];
struct sdhci_host *host;
@@ -57,9 +76,6 @@ static int __sdhci_pci_suspend_host(struct sdhci_pci_chip *chip)
ret = sdhci_suspend_host(host);
if (ret)
goto err_pci_suspend;
-
- if (host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ)
- sdhci_enable_irq_wakeups(host);
}
return 0;
@@ -70,36 +86,6 @@ static int __sdhci_pci_suspend_host(struct sdhci_pci_chip *chip)
return ret;
}
-static int sdhci_pci_init_wakeup(struct sdhci_pci_chip *chip)
-{
- mmc_pm_flag_t pm_flags = 0;
- int i;
-
- for (i = 0; i < chip->num_slots; i++) {
- struct sdhci_pci_slot *slot = chip->slots[i];
-
- if (slot)
- pm_flags |= slot->host->mmc->pm_flags;
- }
-
- return device_init_wakeup(&chip->pdev->dev,
- (pm_flags & MMC_PM_KEEP_POWER) &&
- (pm_flags & MMC_PM_WAKE_SDIO_IRQ));
-}
-
-static int sdhci_pci_suspend_host(struct sdhci_pci_chip *chip)
-{
- int ret;
-
- ret = __sdhci_pci_suspend_host(chip);
- if (ret)
- return ret;
-
- sdhci_pci_init_wakeup(chip);
-
- return 0;
-}
-
int sdhci_pci_resume_host(struct sdhci_pci_chip *chip)
{
struct sdhci_pci_slot *slot;
@@ -1107,7 +1093,7 @@ static int jmicron_suspend(struct sdhci_pci_chip *chip)
{
int i, ret;
- ret = __sdhci_pci_suspend_host(chip);
+ ret = sdhci_pci_suspend_host(chip);
if (ret)
return ret;
@@ -1117,8 +1103,6 @@ static int jmicron_suspend(struct sdhci_pci_chip *chip)
jmicron_enable_mmc(chip->slots[i]->host, 0);
}
- sdhci_pci_init_wakeup(chip);
-
return 0;
}
--
1.9.1
next prev parent reply other threads:[~2018-01-09 7:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-09 7:52 [PATCH RESEND 0/9] mmc: sdhci-pci: Respect PM flags when enabling card detect GPIO IRQ wakeup Adrian Hunter
2018-01-09 7:52 ` Adrian Hunter [this message]
2018-01-17 11:48 ` [PATCH RESEND 1/9] mmc: sdhci-pci: Stop calling sdhci_enable_irq_wakeups() Ulf Hansson
2018-01-09 7:52 ` [PATCH RESEND 2/9] mmc: sdhci-pci: Use device wakeup capability to determine MMC_PM_WAKE_SDIO_IRQ capability Adrian Hunter
2018-01-17 11:48 ` Ulf Hansson
2018-01-09 7:52 ` [PATCH RESEND 3/9] mmc: sdhci: Stop exporting sdhci_enable_irq_wakeups() Adrian Hunter
2018-01-17 11:48 ` Ulf Hansson
2018-01-09 7:52 ` [PATCH RESEND 4/9] mmc: sdhci: Handle failure of enable_irq_wake() Adrian Hunter
2018-01-17 11:48 ` Ulf Hansson
2018-01-09 7:52 ` [PATCH RESEND 5/9] mmc: sdhci: Rework sdhci_enable_irq_wakeups() Adrian Hunter
2018-01-17 11:48 ` Ulf Hansson
2018-01-09 7:52 ` [PATCH RESEND 6/9] mmc: sdhci: Do not unnecessarily enable wakeup for card detect interrupt Adrian Hunter
2018-01-09 7:52 ` [PATCH RESEND 7/9] mmc: sdhci: Do not unnecessarily enable wakeup for SDIO card interrupt Adrian Hunter
2018-01-09 7:52 ` [PATCH RESEND 8/9] mmc: slot-gpio: Add a function to enable/disable card detect IRQ wakeup Adrian Hunter
2018-01-09 7:52 ` [PATCH RESEND 9/9] mmc: sdhci-pci: Respect PM flags when enabling card detect GPIO " Adrian Hunter
2018-01-16 7:43 ` [PATCH RESEND 0/9] " Adrian Hunter
2018-01-16 8:24 ` Ulf Hansson
2018-01-17 11:54 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515484346-800-2-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=haridhar.kalvala@intel.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).