From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Lezcano Subject: [PATCH 09/14] thermal/drivers/hisi: Use platform_get_irq_byname Date: Tue, 25 Sep 2018 11:03:07 +0200 Message-ID: <1537866192-12320-10-git-send-email-daniel.lezcano@linaro.org> References: <1537866192-12320-1-git-send-email-daniel.lezcano@linaro.org> Return-path: In-Reply-To: <1537866192-12320-1-git-send-email-daniel.lezcano@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: edubezval@gmail.com Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, daniel.lezcano@linaro.org, leo.yan@linaro.org, Zhang Rui List-Id: linux-pm@vger.kernel.org As we have the interrupt names defines, replace platform_get_irq() by platform_get_irq_byname(), so no confusion can be made when getting the interrupt with the sensor id. Signed-off-by: Daniel Lezcano --- drivers/thermal/hisi_thermal.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index a542cb3..941c2c4 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -63,6 +63,7 @@ struct hisi_thermal_data; struct hisi_thermal_sensor { struct hisi_thermal_data *data; struct thermal_zone_device *tzd; + const char *irq_name; uint32_t id; uint32_t thres_temp; }; @@ -407,6 +408,7 @@ static int hi6220_thermal_probe(struct hisi_thermal_data *data) return -ENOMEM; data->sensor[0].id = HI6220_CLUSTER0_SENSOR; + data->sensor[0].irq_name = "tsensor_intr"; data->sensor[0].data = data; data->nr_sensors = 1; @@ -423,6 +425,7 @@ static int hi3660_thermal_probe(struct hisi_thermal_data *data) return -ENOMEM; data->sensor[0].id = HI3660_BIG_SENSOR; + data->sensor[0].irq_name = "tsensor_a73"; data->sensor[0].data = data; data->nr_sensors = 1; @@ -576,13 +579,13 @@ static int hisi_thermal_probe(struct platform_device *pdev) return ret; } - data->irq = platform_get_irq(pdev, 0); + data->irq = platform_get_irq_byname(pdev, sensor->irq_name); if (data->irq < 0) return data->irq; ret = devm_request_threaded_irq(dev, data->irq, NULL, hisi_thermal_alarm_irq_thread, - IRQF_ONESHOT, "hisi_thermal", + IRQF_ONESHOT, sensor->irq_name, sensor); if (ret < 0) { dev_err(dev, "failed to request alarm irq: %d\n", ret); -- 2.7.4