* [PATCH] tools/power turbostat: return the exit status of a command
@ 2019-02-12 14:34 David Arcari
2019-02-20 13:55 ` David Arcari
2019-03-21 23:26 ` Rafael J. Wysocki
0 siblings, 2 replies; 4+ messages in thread
From: David Arcari @ 2019-02-12 14:34 UTC (permalink / raw)
To: linux-pm; +Cc: David Arcari, Len Brown, Jirka Hladky, linux-kernel
turbostat failed to return a non-zero exit status even though the
supplied command (turbostat <command>) failed. Currently when turbostat
forks a command it returns zero instead of the actual exit status of the
command. Modify the code to return the exit status.
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: linux-kernel@vger.kernel.org
---
tools/power/x86/turbostat/turbostat.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 9327c0d..c3fad06 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -5077,6 +5077,9 @@ int fork_it(char **argv)
signal(SIGQUIT, SIG_IGN);
if (waitpid(child_pid, &status, 0) == -1)
err(status, "waitpid");
+
+ if (WIFEXITED(status))
+ status = WEXITSTATUS(status);
}
/*
* n.b. fork_it() does not check for errors from for_all_cpus()
--
1.8.3.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] tools/power turbostat: return the exit status of a command
2019-02-12 14:34 [PATCH] tools/power turbostat: return the exit status of a command David Arcari
@ 2019-02-20 13:55 ` David Arcari
2019-03-19 15:12 ` Len Brown
2019-03-21 23:26 ` Rafael J. Wysocki
1 sibling, 1 reply; 4+ messages in thread
From: David Arcari @ 2019-02-20 13:55 UTC (permalink / raw)
To: linux-pm; +Cc: Len Brown, Jirka Hladky, linux-kernel, Prarit Bhargava
ping -- just want to make sure this doesn't get lost.
Thanks!
On 02/12/2019 09:34 AM, David Arcari wrote:
> turbostat failed to return a non-zero exit status even though the
> supplied command (turbostat <command>) failed. Currently when turbostat
> forks a command it returns zero instead of the actual exit status of the
> command. Modify the code to return the exit status.
>
> Signed-off-by: David Arcari <darcari@redhat.com>
> Cc: Len Brown <len.brown@intel.com>
> Cc: Jirka Hladky <jhladky@redhat.com>
> Cc: linux-kernel@vger.kernel.org
> ---
> tools/power/x86/turbostat/turbostat.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
> index 9327c0d..c3fad06 100644
> --- a/tools/power/x86/turbostat/turbostat.c
> +++ b/tools/power/x86/turbostat/turbostat.c
> @@ -5077,6 +5077,9 @@ int fork_it(char **argv)
> signal(SIGQUIT, SIG_IGN);
> if (waitpid(child_pid, &status, 0) == -1)
> err(status, "waitpid");
> +
> + if (WIFEXITED(status))
> + status = WEXITSTATUS(status);
> }
> /*
> * n.b. fork_it() does not check for errors from for_all_cpus()
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] tools/power turbostat: return the exit status of a command
2019-02-20 13:55 ` David Arcari
@ 2019-03-19 15:12 ` Len Brown
0 siblings, 0 replies; 4+ messages in thread
From: Len Brown @ 2019-03-19 15:12 UTC (permalink / raw)
To: David Arcari
Cc: Linux PM list, Len Brown, Jirka Hladky, linux-kernel,
Prarit Bhargava
Acked-by: Len Brown <len.brown@intel.com>
On Wed, Feb 20, 2019 at 5:55 AM David Arcari <darcari@redhat.com> wrote:
>
>
> ping -- just want to make sure this doesn't get lost.
>
> Thanks!
>
> On 02/12/2019 09:34 AM, David Arcari wrote:
> > turbostat failed to return a non-zero exit status even though the
> > supplied command (turbostat <command>) failed. Currently when turbostat
> > forks a command it returns zero instead of the actual exit status of the
> > command. Modify the code to return the exit status.
> >
> > Signed-off-by: David Arcari <darcari@redhat.com>
> > Cc: Len Brown <len.brown@intel.com>
> > Cc: Jirka Hladky <jhladky@redhat.com>
> > Cc: linux-kernel@vger.kernel.org
> > ---
> > tools/power/x86/turbostat/turbostat.c | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
> > index 9327c0d..c3fad06 100644
> > --- a/tools/power/x86/turbostat/turbostat.c
> > +++ b/tools/power/x86/turbostat/turbostat.c
> > @@ -5077,6 +5077,9 @@ int fork_it(char **argv)
> > signal(SIGQUIT, SIG_IGN);
> > if (waitpid(child_pid, &status, 0) == -1)
> > err(status, "waitpid");
> > +
> > + if (WIFEXITED(status))
> > + status = WEXITSTATUS(status);
> > }
> > /*
> > * n.b. fork_it() does not check for errors from for_all_cpus()
> >
>
--
Len Brown, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] tools/power turbostat: return the exit status of a command
2019-02-12 14:34 [PATCH] tools/power turbostat: return the exit status of a command David Arcari
2019-02-20 13:55 ` David Arcari
@ 2019-03-21 23:26 ` Rafael J. Wysocki
1 sibling, 0 replies; 4+ messages in thread
From: Rafael J. Wysocki @ 2019-03-21 23:26 UTC (permalink / raw)
To: David Arcari; +Cc: linux-pm, Len Brown, Jirka Hladky, linux-kernel
On Tuesday, February 12, 2019 3:34:39 PM CET David Arcari wrote:
> turbostat failed to return a non-zero exit status even though the
> supplied command (turbostat <command>) failed. Currently when turbostat
> forks a command it returns zero instead of the actual exit status of the
> command. Modify the code to return the exit status.
>
> Signed-off-by: David Arcari <darcari@redhat.com>
> Cc: Len Brown <len.brown@intel.com>
> Cc: Jirka Hladky <jhladky@redhat.com>
> Cc: linux-kernel@vger.kernel.org
> ---
> tools/power/x86/turbostat/turbostat.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
> index 9327c0d..c3fad06 100644
> --- a/tools/power/x86/turbostat/turbostat.c
> +++ b/tools/power/x86/turbostat/turbostat.c
> @@ -5077,6 +5077,9 @@ int fork_it(char **argv)
> signal(SIGQUIT, SIG_IGN);
> if (waitpid(child_pid, &status, 0) == -1)
> err(status, "waitpid");
> +
> + if (WIFEXITED(status))
> + status = WEXITSTATUS(status);
> }
> /*
> * n.b. fork_it() does not check for errors from for_all_cpus()
>
Applied, thanks!
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-03-21 23:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-02-12 14:34 [PATCH] tools/power turbostat: return the exit status of a command David Arcari
2019-02-20 13:55 ` David Arcari
2019-03-19 15:12 ` Len Brown
2019-03-21 23:26 ` Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).