* Re: [for-next PATCH V2] PM / devfreq: Add sysfs node to expose available frequencies
@ 2012-10-26 6:16 MyungJoo Ham
2012-10-31 0:45 ` Rafael J. Wysocki
0 siblings, 1 reply; 4+ messages in thread
From: MyungJoo Ham @ 2012-10-26 6:16 UTC (permalink / raw)
To: Nishanth Menon, linux-pm
Cc: Rajagopal Venkat, 박경민, Rafael J. Wysocki,
Kevin Hilman, linux-kernel@vger.kernel.org
> devfreq governors such as ondemand are controlled by a min and
> max frequency, while governors like userspace governor allow us
> to set a specific frequency.
> However, for the same specific device, depending on the SoC, the
> available frequencies can vary.
>
> So expose the available frequencies as a snapshot over sysfs to
> allow informed decisions.
>
> This was inspired by cpufreq framework's equivalent for similar
> usage sysfs node: scaling_available_frequencies.
>
> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> Cc: Kevin Hilman <khilman@ti.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [for-next PATCH V2] PM / devfreq: Add sysfs node to expose available frequencies 2012-10-26 6:16 [for-next PATCH V2] PM / devfreq: Add sysfs node to expose available frequencies MyungJoo Ham @ 2012-10-31 0:45 ` Rafael J. Wysocki 0 siblings, 0 replies; 4+ messages in thread From: Rafael J. Wysocki @ 2012-10-31 0:45 UTC (permalink / raw) To: myungjoo.ham Cc: Nishanth Menon, linux-pm, Rajagopal Venkat, 박경민, Kevin Hilman, linux-kernel@vger.kernel.org On Friday, October 26, 2012 06:16:36 AM MyungJoo Ham wrote: > > devfreq governors such as ondemand are controlled by a min and > > max frequency, while governors like userspace governor allow us > > to set a specific frequency. > > However, for the same specific device, depending on the SoC, the > > available frequencies can vary. > > > > So expose the available frequencies as a snapshot over sysfs to > > allow informed decisions. > > > > This was inspired by cpufreq framework's equivalent for similar > > usage sysfs node: scaling_available_frequencies. > > > > Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> > > Cc: MyungJoo Ham <myungjoo.ham@samsung.com> > > Cc: Kyungmin Park <kyungmin.park@samsung.com> > > Cc: "Rafael J. Wysocki" <rjw@sisk.pl> > > Cc: Kevin Hilman <khilman@ti.com> > > Cc: linux-pm@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > > > Signed-off-by: Nishanth Menon <nm@ti.com> > > Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Are you going to handle this patch? Rafael -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Re: [for-next PATCH V2] PM / devfreq: Add sysfs node to expose available frequencies @ 2012-10-31 2:11 MyungJoo Ham 2012-10-31 9:15 ` Rafael J. Wysocki 0 siblings, 1 reply; 4+ messages in thread From: MyungJoo Ham @ 2012-10-31 2:11 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Nishanth Menon, linux-pm, Rajagopal Venkat, 박경민, Kevin Hilman, linux-kernel@vger.kernel.org > On Friday, October 26, 2012 06:16:36 AM MyungJoo Ham wrote: > > > devfreq governors such as ondemand are controlled by a min and > > > max frequency, while governors like userspace governor allow us > > > to set a specific frequency. > > > However, for the same specific device, depending on the SoC, the > > > available frequencies can vary. > > > > > > So expose the available frequencies as a snapshot over sysfs to > > > allow informed decisions. > > > > > > This was inspired by cpufreq framework's equivalent for similar > > > usage sysfs node: scaling_available_frequencies. > > > > > > Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> > > > Cc: MyungJoo Ham <myungjoo.ham@samsung.com> > > > Cc: Kyungmin Park <kyungmin.park@samsung.com> > > > Cc: "Rafael J. Wysocki" <rjw@sisk.pl> > > > Cc: Kevin Hilman <khilman@ti.com> > > > Cc: linux-pm@vger.kernel.org > > > Cc: linux-kernel@vger.kernel.org > > > > > > Signed-off-by: Nishanth Menon <nm@ti.com> > > > > Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> > > Are you going to handle this patch? Yes, I've just setup the git repository this week and I'm willing to handle this one. It is applied at http://git.kernel.org/?p=linux/kernel/git/mzx/devfreq.git;a=shortlog;h=refs/heads/for-rafael Thanks, MyungJoo > > Rafael > > > -- > I speak only for myself. > Rafael J. Wysocki, Intel Open Source Technology Center. > > > > > > > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [for-next PATCH V2] PM / devfreq: Add sysfs node to expose available frequencies 2012-10-31 2:11 MyungJoo Ham @ 2012-10-31 9:15 ` Rafael J. Wysocki 0 siblings, 0 replies; 4+ messages in thread From: Rafael J. Wysocki @ 2012-10-31 9:15 UTC (permalink / raw) To: myungjoo.ham Cc: Nishanth Menon, linux-pm, Rajagopal Venkat, 박경민, Kevin Hilman, linux-kernel@vger.kernel.org On Wednesday, October 31, 2012 02:11:06 AM MyungJoo Ham wrote: > > On Friday, October 26, 2012 06:16:36 AM MyungJoo Ham wrote: > > > > devfreq governors such as ondemand are controlled by a min and > > > > max frequency, while governors like userspace governor allow us > > > > to set a specific frequency. > > > > However, for the same specific device, depending on the SoC, the > > > > available frequencies can vary. > > > > > > > > So expose the available frequencies as a snapshot over sysfs to > > > > allow informed decisions. > > > > > > > > This was inspired by cpufreq framework's equivalent for similar > > > > usage sysfs node: scaling_available_frequencies. > > > > > > > > Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> > > > > Cc: MyungJoo Ham <myungjoo.ham@samsung.com> > > > > Cc: Kyungmin Park <kyungmin.park@samsung.com> > > > > Cc: "Rafael J. Wysocki" <rjw@sisk.pl> > > > > Cc: Kevin Hilman <khilman@ti.com> > > > > Cc: linux-pm@vger.kernel.org > > > > Cc: linux-kernel@vger.kernel.org > > > > > > > > Signed-off-by: Nishanth Menon <nm@ti.com> > > > > > > Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> > > > > Are you going to handle this patch? > > Yes, I've just setup the git repository this week > and I'm willing to handle this one. > > It is applied at > http://git.kernel.org/?p=linux/kernel/git/mzx/devfreq.git;a=shortlog;h=refs/heads/for-rafael OK Please let me know when you want me to pull from your tree. Please also note that the release of v3.7-rc6 is the deadline for non-bugfix changes targeted at v3.8. :-) Thanks, Rafael -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <[for-next PATCH] PM / devfreq: Add sysfs node to expose available frequencies>]
* [for-next PATCH V2] PM / devfreq: Add sysfs node to expose available frequencies [not found] <[for-next PATCH] PM / devfreq: Add sysfs node to expose available frequencies> @ 2012-10-26 0:48 ` Nishanth Menon 0 siblings, 0 replies; 4+ messages in thread From: Nishanth Menon @ 2012-10-26 0:48 UTC (permalink / raw) To: linux-pm Cc: Nishanth Menon, Rajagopal Venkat, MyungJoo Ham, Kyungmin Park, Rafael J. Wysocki, Kevin Hilman, linux-kernel devfreq governors such as ondemand are controlled by a min and max frequency, while governors like userspace governor allow us to set a specific frequency. However, for the same specific device, depending on the SoC, the available frequencies can vary. So expose the available frequencies as a snapshot over sysfs to allow informed decisions. This was inspired by cpufreq framework's equivalent for similar usage sysfs node: scaling_available_frequencies. Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kevin Hilman <khilman@ti.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Nishanth Menon <nm@ti.com> --- Applies on top of Rafael's linux-next branch: git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git linux-next b960e9a Merge branch 'pm-sleep-next' into linux-next Example output from Beagleboard XM (3730) using a dummy test driver http://pastebin.pandaboard.org/index.php/view/85100576 : /sys/devices/platform/iva.0/devfreq/iva.0 # cat available_frequencies 260000000 520000000 660000000 /sys/devices/platform/iva.0/devfreq/iva.0 # cat available_frequencies|tr ' ' '-' 260000000-520000000-660000000 V2 : - review comment update from v1 - protected the sysfs from buffer overflow - just in case.. V1: https://patchwork.kernel.org/patch/1648001/ Documentation/ABI/testing/sysfs-class-devfreq | 9 +++++++ drivers/devfreq/devfreq.c | 32 +++++++++++++++++++++++++ 2 files changed, 41 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index e6cf08e..e672ccb 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -51,3 +51,12 @@ Description: The /sys/class/devfreq/.../userspace/set_freq shows and sets the requested frequency for the devfreq object if userspace governor is in effect. + +What: /sys/class/devfreq/.../available_frequencies +Date: October 2012 +Contact: Nishanth Menon <nm@ti.com> +Description: + The /sys/class/devfreq/.../available_frequencies shows + the available frequencies of the corresponding devfreq object. + This is a snapshot of available frequencies and not limited + by the min/max frequency restrictions. diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index d02ee7e..104018e 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -571,9 +571,41 @@ static ssize_t show_max_freq(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%lu\n", to_devfreq(dev)->max_freq); } +static ssize_t show_available_freqs(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct devfreq *df = to_devfreq(d); + struct device *dev = df->dev.parent; + struct opp *opp; + ssize_t count = 0; + unsigned long freq = 0; + + rcu_read_lock(); + do { + opp = opp_find_freq_ceil(dev, &freq); + if (IS_ERR(opp)) + break; + + count += scnprintf(&buf[count], (PAGE_SIZE - count - 2), + "%lu ", freq); + freq++; + } while (1); + rcu_read_unlock(); + + /* Truncate the trailing space */ + if (count) + count--; + + count += sprintf(&buf[count], "\n"); + + return count; +} + static struct device_attribute devfreq_attrs[] = { __ATTR(governor, S_IRUGO, show_governor, NULL), __ATTR(cur_freq, S_IRUGO, show_freq, NULL), + __ATTR(available_frequencies, S_IRUGO, show_available_freqs, NULL), __ATTR(target_freq, S_IRUGO, show_target_freq, NULL), __ATTR(polling_interval, S_IRUGO | S_IWUSR, show_polling_interval, store_polling_interval), -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-10-31 9:11 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-10-26 6:16 [for-next PATCH V2] PM / devfreq: Add sysfs node to expose available frequencies MyungJoo Ham 2012-10-31 0:45 ` Rafael J. Wysocki -- strict thread matches above, loose matches on Subject: below -- 2012-10-31 2:11 MyungJoo Ham 2012-10-31 9:15 ` Rafael J. Wysocki [not found] <[for-next PATCH] PM / devfreq: Add sysfs node to expose available frequencies> 2012-10-26 0:48 ` Nishanth Menon
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).