linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jishnu Prakash <quic_jprakash@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
	<devicetree@vger.kernel.org>, <mka@chromium.org>,
	<dmitry.baryshkov@linaro.org>, <robh+dt@kernel.org>,
	<linus.walleij@linaro.org>, <quic_aghayal@quicinc.com>,
	<daniel.lezcano@linaro.org>, <rui.zhang@intel.com>,
	<quic_subbaram@quicinc.com>, <jic23@kernel.org>,
	<amitk@kernel.org>, "Thara Gopinath" <thara.gopinath@linaro.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	<linux-pm@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: <linux-arm-msm-owner@vger.kernel.org>,
	Jishnu Prakash <quic_jprakash@quicinc.com>
Subject: [RESEND PATCH V5 3/4] thermal: qcom: Add support for multiple generations of devices
Date: Sun, 3 Apr 2022 18:47:48 +0530	[thread overview]
Message-ID: <1648991869-20899-4-git-send-email-quic_jprakash@quicinc.com> (raw)
In-Reply-To: <1648991869-20899-1-git-send-email-quic_jprakash@quicinc.com>

Refactor code to support multiple generations of ADC_TM devices
by defining gen number, irq name and disable, configure, isr and
init APIs in the individual data structs.

Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 82 ++++++++++++++++++++------------
 1 file changed, 51 insertions(+), 31 deletions(-)

diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index 824671c..6d8fcf2 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -78,11 +78,10 @@ enum adc5_timer_select {
 	ADC5_TIMER_SEL_NONE,
 };
 
-struct adc_tm5_data {
-	const u32	full_scale_code_volt;
-	unsigned int	*decimation;
-	unsigned int	*hw_settle;
-	bool		is_hc;
+enum adc5_gen {
+	ADC_TM5,
+	ADC_TM_HC,
+	ADC_TM5_MAX
 };
 
 enum adc_tm5_cal_method {
@@ -92,6 +91,19 @@ enum adc_tm5_cal_method {
 };
 
 struct adc_tm5_chip;
+struct adc_tm5_channel;
+
+struct adc_tm5_data {
+	const u32 full_scale_code_volt;
+	unsigned int *decimation;
+	unsigned int *hw_settle;
+	int (*disable_channel)(struct adc_tm5_channel *channel);
+	int (*configure)(struct adc_tm5_channel *channel, int low, int high);
+	irqreturn_t (*isr)(int irq, void *data);
+	int (*init)(struct adc_tm5_chip *chip);
+	char *irq_name;
+	int gen;
+};
 
 /**
  * struct adc_tm5_channel - ADC Thermal Monitoring channel data.
@@ -139,22 +151,6 @@ struct adc_tm5_chip {
 	u16			base;
 };
 
-static const struct adc_tm5_data adc_tm5_data_pmic = {
-	.full_scale_code_volt = 0x70e4,
-	.decimation = (unsigned int []) { 250, 420, 840 },
-	.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
-					 1000, 2000, 4000, 8000, 16000, 32000,
-					 64000, 128000 },
-};
-
-static const struct adc_tm5_data adc_tm_hc_data_pmic = {
-	.full_scale_code_volt = 0x70e4,
-	.decimation = (unsigned int []) { 256, 512, 1024 },
-	.hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700,
-					 1000, 2000, 4000, 6000, 8000, 10000 },
-	.is_hc = true,
-};
-
 static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
 {
 	return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len);
@@ -343,14 +339,14 @@ static int adc_tm5_set_trips(void *data, int low, int high)
 		channel->channel, low, high);
 
 	if (high == INT_MAX && low <= -INT_MAX)
-		ret = adc_tm5_disable_channel(channel);
+		ret = chip->data->disable_channel(channel);
 	else
-		ret = adc_tm5_configure(channel, low, high);
+		ret = chip->data->configure(channel, low, high);
 
 	return ret;
 }
 
-static struct thermal_zone_of_device_ops adc_tm5_ops = {
+static struct thermal_zone_of_device_ops adc_tm5_thermal_ops = {
 	.get_temp = adc_tm5_get_temp,
 	.set_trips = adc_tm5_set_trips,
 };
@@ -366,7 +362,7 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
 		tzd = devm_thermal_zone_of_sensor_register(adc_tm->dev,
 							   adc_tm->channels[i].channel,
 							   &adc_tm->channels[i],
-							   &adc_tm5_ops);
+							   &adc_tm5_thermal_ops);
 		if (IS_ERR(tzd)) {
 			if (PTR_ERR(tzd) == -ENODEV) {
 				dev_warn(adc_tm->dev, "thermal sensor on channel %d is not used\n",
@@ -526,6 +522,33 @@ static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
 	return 0;
 }
 
+static const struct adc_tm5_data adc_tm5_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 250, 420, 840 },
+	.hw_settle = (unsigned int []) { 15, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 8000, 16000, 32000,
+					 64000, 128000 },
+	.disable_channel = adc_tm5_disable_channel,
+	.configure = adc_tm5_configure,
+	.isr = adc_tm5_isr,
+	.init = adc_tm5_init,
+	.irq_name = "pm-adc-tm5",
+	.gen = ADC_TM5,
+};
+
+static const struct adc_tm5_data adc_tm_hc_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 256, 512, 1024 },
+	.hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 6000, 8000, 10000 },
+	.disable_channel = adc_tm5_disable_channel,
+	.configure = adc_tm5_configure,
+	.isr = adc_tm5_isr,
+	.init = adc_tm_hc_init,
+	.irq_name = "pm-adc-tm5",
+	.gen = ADC_TM_HC,
+};
+
 static int adc_tm5_get_dt_data(struct adc_tm5_chip *adc_tm, struct device_node *node)
 {
 	struct adc_tm5_channel *channels;
@@ -623,10 +646,7 @@ static int adc_tm5_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (adc_tm->data->is_hc)
-		ret = adc_tm_hc_init(adc_tm);
-	else
-		ret = adc_tm5_init(adc_tm);
+	ret = adc_tm->data->init(adc_tm);
 	if (ret) {
 		dev_err(dev, "adc-tm init failed\n");
 		return ret;
@@ -638,8 +658,8 @@ static int adc_tm5_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	return devm_request_threaded_irq(dev, irq, NULL, adc_tm5_isr,
-					 IRQF_ONESHOT, "pm-adc-tm5", adc_tm);
+	return devm_request_threaded_irq(dev, irq, NULL, adc_tm->data->isr,
+			IRQF_ONESHOT, adc_tm->data->irq_name, adc_tm);
 }
 
 static const struct of_device_id adc_tm5_match_table[] = {
-- 
2.7.4


  parent reply	other threads:[~2022-04-03 13:18 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-03 13:17 [RESEND PATCH V5 0/4] thermal: qcom: Add support for PMIC5 Gen2 ADC_TM Jishnu Prakash
2022-04-03 13:17 ` [RESEND PATCH V5 1/4] dt-bindings: thermal: qcom: add PMIC5 Gen2 ADC_TM bindings Jishnu Prakash
2022-05-19 12:44   ` [thermal: thermal/next] " thermal-bot for Jishnu Prakash
2022-04-03 13:17 ` [RESEND PATCH V5 2/4] iio: adc: qcom-vadc-common: add reverse scaling for PMIC5 Gen2 ADC_TM Jishnu Prakash
2022-05-19 12:44   ` [thermal: thermal/next] " thermal-bot for Jishnu Prakash
2022-04-03 13:17 ` Jishnu Prakash [this message]
2022-05-19 12:44   ` [thermal: thermal/next] thermal/drivers/qcom: Add support for multiple generations of devices thermal-bot for Jishnu Prakash
2022-04-03 13:17 ` [RESEND PATCH V5 4/4] thermal: qcom: add support for PMIC5 Gen2 ADCTM Jishnu Prakash
2022-05-19 12:44   ` [thermal: thermal/next] thermal/drivers/qcom: Add " thermal-bot for Jishnu Prakash
2022-04-06 12:27 ` [RESEND PATCH V5 0/4] thermal: qcom: Add support for PMIC5 Gen2 ADC_TM Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1648991869-20899-4-git-send-email-quic_jprakash@quicinc.com \
    --to=quic_jprakash@quicinc.com \
    --cc=agross@kernel.org \
    --cc=amitk@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=jic23@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=quic_aghayal@quicinc.com \
    --cc=quic_subbaram@quicinc.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=thara.gopinath@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).