From: MyungJoo Ham <myungjoo.ham@samsung.com>
To: Xiaoguang Chen <chenxg@marvell.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: 박경민 <kyungmin.park@samsung.com>, linux-pm@lists.linux-foundation.org
Subject: Re: [PATCH 1/2] PM: devfreq: add freq table and available_freqs
Date: Wed, 13 Jun 2012 04:53:47 +0000 (GMT) [thread overview]
Message-ID: <16928680.915361339563225913.JavaMail.weblogic@epml04> (raw)
> Devfreq framework don't have a frequency table, add it
> for easy use.
>
> Signed-off-by: Xiaoguang Chen <chenxg@marvell.com>
If you need a predefined data structure to support frequency table,
you can simply use OPP, which has helper functions implemented in
devfreq subsystem. Is there any reason not to use OPP and to implement
another data structure to store a frequency table attached to a device?
Cheers!
MyungJoo.
> ---
> drivers/devfreq/devfreq.c | 26 ++++++++++++++++++++++++++
> include/linux/devfreq.h | 12 ++++++++++++
> 2 files changed, 38 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
> index 70c31d4..2144200 100644
> --- a/drivers/devfreq/devfreq.c
> +++ b/drivers/devfreq/devfreq.c
> @@ -460,6 +460,17 @@ int devfreq_remove_device(struct devfreq *devfreq)
> return 0;
> }
>
> +/*
> + * devfreq_set_freq_table()- Set frequency table for devfreq
> + * @devfreq The devfreq instance
> + * @table The frequency table that device supports
> + */
> +void devfreq_set_freq_table(struct devfreq *devfreq,
> + struct devfreq_frequency_table *table)
> +{
> + devfreq->freq_table = table;
> +}
> +
> static ssize_t show_governor(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -472,6 +483,20 @@ static ssize_t show_freq(struct device *dev,
> return sprintf(buf, "%lu\n", to_devfreq(dev)->previous_freq);
> }
>
> +static ssize_t show_avail_freq(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int len = 0, i;
> + struct devfreq *devfreq = to_devfreq(dev);
> + if (devfreq->freq_table)
> + for (i = 0; devfreq->freq_table[i].frequency != DEVFREQ_TABLE_END; i++)
> + len += sprintf(buf + len, "%lu\n",
> + devfreq->freq_table[i].frequency);
> + if (len == 0)
> + len += sprintf(buf + len, "No frequency table is provided\n");
> + return len;
> +}
> +
> static ssize_t show_polling_interval(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> @@ -595,6 +620,7 @@ static struct device_attribute devfreq_attrs[] = {
> store_polling_interval),
> __ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq),
> __ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq),
> + __ATTR(available_freqs, S_IRUGO, show_avail_freq, NULL),
> { },
> };
>
> diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
> index 281c72a..e5e4036 100644
> --- a/include/linux/devfreq.h
> +++ b/include/linux/devfreq.h
> @@ -52,6 +52,14 @@ struct devfreq_dev_status {
> */
> #define DEVFREQ_FLAG_LEAST_UPPER_BOUND 0x1
>
> +#define DEVFREQ_ENTRY_INVALID (~0)
> +#define DEVFREQ_TABLE_END (~1)
> +
> +struct devfreq_frequency_table {
> + unsigned int index;
> + unsigned long frequency;
> +};
> +
> /**
> * struct devfreq_dev_profile - Devfreq's user device profile
> * @initial_freq The operating frequency when devfreq_add_device() is
> @@ -130,6 +138,7 @@ struct devfreq_governor {
> * "devfreq_monitor" executions to reevaluate
> * frequency/voltage of the device. Set by
> * profile's polling_ms interval.
> + * @freq_table The frequency table that device supports
> * @data Private data of the governor. The devfreq framework does not
> * touch this.
> * @being_removed a flag to mark that this object is being removed in
> @@ -157,6 +166,7 @@ struct devfreq {
> unsigned long polling_jiffies;
> unsigned long previous_freq;
> unsigned int next_polling;
> + struct devfreq_frequency_table *freq_table;
>
> void *data; /* private data for governors */
>
> @@ -180,6 +190,8 @@ extern int devfreq_register_opp_notifier(struct device *dev,
> struct devfreq *devfreq);
> extern int devfreq_unregister_opp_notifier(struct device *dev,
> struct devfreq *devfreq);
> +extern void devfreq_set_freq_table(struct devfreq *devfreq,
> + struct devfreq_frequency_table *table);
>
> #ifdef CONFIG_DEVFREQ_GOV_POWERSAVE
> extern const struct devfreq_governor devfreq_powersave;
> --
> 1.7.0.4
>
next reply other threads:[~2012-06-13 4:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-13 4:53 MyungJoo Ham [this message]
2012-06-13 5:28 ` [PATCH 1/2] PM: devfreq: add freq table and available_freqs Xiaoguang Chen
2012-06-14 1:50 ` Xiaoguang Chen
-- strict thread matches above, loose matches on Subject: below --
2012-06-19 5:04 함명주
2012-06-19 5:49 함명주
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16928680.915361339563225913.JavaMail.weblogic@epml04 \
--to=myungjoo.ham@samsung.com \
--cc=chenxg@marvell.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).