Re: [PATCH v3 01/10] dt-bindings: gpu: mali-valhall-csf: add mediatek,mt8196-mali variant

["Rob Herring (Arm)" <robh@kernel.org>]

On Wed, 17 Sep 2025 14:22:32 +0200, Nicolas Frattaroli wrote:
> The Mali-based GPU on the MediaTek MT8196 SoC uses a separate MCU to
> control the power and frequency of the GPU.
> 
> It lets us omit the OPP tables from the device tree, as those can now be
> enumerated at runtime from the MCU. It also means the mali GPU node
> described in this binding does not have any clocks in this case, as all
> clock control is delegated to the MCU.
> 
> Add the mediatek,mt8196-mali compatible, and a performance-domains
> property which points to the MCU's device tree node in this case. It's
> required on mt8196 devices.
> 
> Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
> ---
>  .../bindings/gpu/arm,mali-valhall-csf.yaml         | 32 ++++++++++++++++++++--
>  1 file changed, 30 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.example.dtb: gpu@48000000 (mediatek,mt8196-mali): 'clocks' is a required property
	from schema $id: http://devicetree.org/schemas/gpu/arm,mali-valhall-csf.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250917-mt8196-gpufreq-v3-1-c4ede4b4399e@collabora.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.