From: srinivas pandruvada <srinivas.pandruvada@linux.intel.com>
To: Thorsten Blum <thorsten.blum@linux.dev>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>,
Ingo Molnar <mingo@kernel.org>,
"Peter Zijlstra (Intel)" <peterz@infradead.org>,
"Xin Li (Intel)" <xin@zytor.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] thermal: intel: int340x: Use sysfs_emit{_at} in sysfs show functions
Date: Mon, 22 Dec 2025 06:43:45 -0800 [thread overview]
Message-ID: <1dd5045fbbb443fc12e602fc2803857401289294.camel@linux.intel.com> (raw)
In-Reply-To: <20251220223026.125678-1-thorsten.blum@linux.dev>
On Sat, 2025-12-20 at 23:30 +0100, Thorsten Blum wrote:
> Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show
> functions. sysfs_emit() and sysfs_emit_at() are preferred to format
> sysfs output as it provides better bounds checking.
>
> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> ---
> .../intel/int340x_thermal/processor_thermal_device.c | 5 +++--
> .../intel/int340x_thermal/processor_thermal_rfim.c | 9 +++++--
> --
> .../intel/int340x_thermal/processor_thermal_wt_req.c | 7 ++++---
> 3 files changed, 12 insertions(+), 9 deletions(-)
>
> diff --git
> a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> index 48e7849d4816..f80dbe2ca7e4 100644
> ---
> a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> +++
> b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> @@ -8,6 +8,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/pci.h>
> +#include <linux/sysfs.h>
> #include <linux/thermal.h>
> #include <asm/msr.h>
> #include "int340x_thermal_zone.h"
> @@ -23,7 +24,7 @@ static ssize_t
> power_limit_##index##_##suffix##_show(struct device *dev, \
> { \
> struct proc_thermal_device *proc_dev = dev_get_drvdata(dev);
> \
> \
> - return sprintf(buf, "%lu\n",\
> + return sysfs_emit(buf, "%lu\n",\
> (unsigned long)proc_dev->power_limits[index].suffix * 1000);
> \
> }
>
> @@ -143,7 +144,7 @@ static ssize_t
> tcc_offset_degree_celsius_show(struct device *dev,
> if (offset < 0)
> return offset;
>
> - return sprintf(buf, "%d\n", offset);
> + return sysfs_emit(buf, "%d\n", offset);
> }
>
> static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
> diff --git
> a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> index 589a3a71f0c4..bb9398dfa3c1 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> @@ -7,6 +7,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/pci.h>
> +#include <linux/sysfs.h>
> #include "processor_thermal_device.h"
>
> MODULE_IMPORT_NS("INT340X_THERMAL");
> @@ -211,9 +212,9 @@ static ssize_t suffix##_show(struct device *dev,\
> ret = (reg_val >> mmio_regs[ret].shift) &
> mmio_regs[ret].mask;\
> err = get_mapped_string(mapping, attr->attr.name, ret,
> &str);\
> if (!err)\
> - return sprintf(buf, "%s\n", str);\
> + return sysfs_emit(buf, "%s\n", str);\
> if (err == -EOPNOTSUPP)\
> - return sprintf(buf, "%u\n", ret);\
> + return sysfs_emit(buf, "%u\n", ret);\
> return err;\
> }
>
> @@ -398,7 +399,7 @@ static ssize_t rfi_restriction_show(struct device
> *dev,
> if (ret)
> return ret;
>
> - return sprintf(buf, "%llu\n", resp);
> + return sysfs_emit(buf, "%llu\n", resp);
> }
>
> static ssize_t ddr_data_rate_show(struct device *dev,
> @@ -413,7 +414,7 @@ static ssize_t ddr_data_rate_show(struct device
> *dev,
> if (ret)
> return ret;
>
> - return sprintf(buf, "%llu\n", resp);
> + return sysfs_emit(buf, "%llu\n", resp);
> }
>
> static DEVICE_ATTR_RW(rfi_restriction);
> diff --git
> a/drivers/thermal/intel/int340x_thermal/processor_thermal_wt_req.c
> b/drivers/thermal/intel/int340x_thermal/processor_thermal_wt_req.c
> index b95810f4a011..2372f5202019 100644
> ---
> a/drivers/thermal/intel/int340x_thermal/processor_thermal_wt_req.c
> +++
> b/drivers/thermal/intel/int340x_thermal/processor_thermal_wt_req.c
> @@ -7,6 +7,7 @@
> */
>
> #include <linux/pci.h>
> +#include <linux/sysfs.h>
> #include "processor_thermal_device.h"
>
> /* List of workload types */
> @@ -28,9 +29,9 @@ static ssize_t workload_available_types_show(struct
> device *dev,
> int ret = 0;
>
> while (workload_types[i] != NULL)
> - ret += sprintf(&buf[ret], "%s ",
> workload_types[i++]);
> + ret += sysfs_emit_at(buf, ret, "%s ",
> workload_types[i++]);
>
> - ret += sprintf(&buf[ret], "\n");
> + ret += sysfs_emit_at(buf, ret, "\n");
>
> return ret;
> }
> @@ -85,7 +86,7 @@ static ssize_t workload_type_show(struct device
> *dev,
> if (cmd_resp > ARRAY_SIZE(workload_types) - 1)
> return -EINVAL;
>
> - return sprintf(buf, "%s\n", workload_types[cmd_resp]);
> + return sysfs_emit(buf, "%s\n", workload_types[cmd_resp]);
> }
>
> static DEVICE_ATTR_RW(workload_type);
prev parent reply other threads:[~2025-12-22 14:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-20 22:30 [PATCH] thermal: intel: int340x: Use sysfs_emit{_at} in sysfs show functions Thorsten Blum
2025-12-22 14:43 ` srinivas pandruvada [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1dd5045fbbb443fc12e602fc2803857401289294.camel@linux.intel.com \
--to=srinivas.pandruvada@linux.intel.com \
--cc=daniel.lezcano@linaro.org \
--cc=dave.hansen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=rafael.j.wysocki@intel.com \
--cc=rafael@kernel.org \
--cc=rui.zhang@intel.com \
--cc=thorsten.blum@linux.dev \
--cc=xin@zytor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).