Re: [RFC] Linux Power Management

[Pavel Machek <pavel@suse.cz>]

[-- Attachment #1: Type: text/plain, Size: 1344 bytes --]

Hi!

> Device Drivers
> ==============
> 
> Linux device drivers must often save and restore state during power
> transitions.  The following API is proposed:
> 
> ->prepare_state(struct device * dev, pm_state_t state,
>                 unsigned int reason);
> ->complete_state(struct device * dev, pm_state_t state,
>                 unsigned int reason);
> 
> The following would be an example of a typical transition:
> 
> 1.) the policy manager decides to put a PCI ethernet card into D3 from
> D0.
> 2.) ->prepare_state is called, the ethernet driver saves its state
> information and disables the hardware
> 3.) the power driver's ->set_state function is called, and power is
> actually removed.
> 4.) ->complete_state is called to cleanup and make any final
> adjustments.
> 
> * In the case of D3->D0 ->complete_state would restore state.
> 
> Possible "reasons" might include DYNAMIC_PM, HALT, REBOOT, SUSPEND,
> RESUME, etc.
> 
> This API is different from the current ->suspend and ->resume because it
> applies to situations outside of system suspend (e.g. runtime power
> management) and has an emphasis on specific device power states. 

No. It took 2+ years to add at at least system power states. You want
to build on that, not scratch it and start over.

								Pavel
-- 
Boycott Kodak -- for their patent abuse against Java.

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]