Re: usblp suspend failure with 2.6.15-rc5

Re: usblp suspend failure with 2.6.15-rc5

[Adrian Bunk]

[-- Attachment #1: Type: text/plain, Size: 1358 bytes --]

On Tue, Dec 06, 2005 at 07:54:31PM +0100, Carl-Daniel Hailfinger wrote:

> Hi,

Hi Carl-Daniel,

> since I switched to 2.6.15-rc2-git6, my machine is not able to suspend
> anymore if my USB printer is plugged in. The problem is reproducible.
> 
> usb 1-2: new full speed USB device using uhci_hcd and address 3
> drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 
> 0 proto 2 vid 0x04E8 pid 0x3242
> usbcore: registered new driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> PM: Preparing system for mem sleep
> Stopping tasks: ==================================================|
> usblp 1-2:1.0: no suspend?
> Could not suspend device 1-2: error -16
> Some devices failed to suspend
> Restarting tasks... done
> 
> 
> Earlier kernels (2.6.14.2 and before) worked just fine.
> 
> A first search suggests this problem was introduced between
> 2.6.14 and 2.6.15-rc2-git6. Should I try to narrow it down further?

yes, that would be good.

In this case, it would also help if you'd open a bug at 
bugzilla.kernel.org.

> Regards,
> Carl-Daniel

TIA
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: usblp suspend failure with 2.6.15-rc5

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1218 bytes --]

Hi!

> > since I switched to 2.6.15-rc2-git6, my machine is not able to suspend
> > anymore if my USB printer is plugged in. The problem is reproducible.
> > 
> > usb 1-2: new full speed USB device using uhci_hcd and address 3
> > drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 
> > 0 proto 2 vid 0x04E8 pid 0x3242
> > usbcore: registered new driver usblp
> > drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> > PM: Preparing system for mem sleep
> > Stopping tasks: ==================================================|
> > usblp 1-2:1.0: no suspend?
> > Could not suspend device 1-2: error -16
> > Some devices failed to suspend
> > Restarting tasks... done
> > 
> > 
> > Earlier kernels (2.6.14.2 and before) worked just fine.
> > 
> > A first search suggests this problem was introduced between
> > 2.6.14 and 2.6.15-rc2-git6. Should I try to narrow it down further?
> 
> yes, that would be good.
> 
> In this case, it would also help if you'd open a bug at 
> bugzilla.kernel.org.

Well, usblp does not have any suspend method, and usb probably just
started checking... There's also CONFIG_USB_SUSPEND option you may
want to play with.
							Pavel
-- 
Thanks, Sharp!

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]