public inbox for linux-pm@vger.kernel.org
 help / color / mirror / Atom feed
* [patch 2.6.18-rc5 + pm patches] PM: no suspend_prepare() phase
@ 2006-08-30 21:09 David Brownell
  0 siblings, 0 replies; only message in thread
From: David Brownell @ 2006-08-30 21:09 UTC (permalink / raw)
  To: Greg KH; +Cc: Linus Torvalds, Linux-pm mailing list

[ As previously discussed. ]

Remove the new suspend_prepare() phase.  It doesn't seem very usable,
has never been tested, doesn't address fault cleanup, and would need
a sibling resume_complete(); plus there are no real use cases.  It
could be restored later if those issues get resolved.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Index: g26/drivers/base/power/suspend.c
===================================================================
--- g26.orig/drivers/base/power/suspend.c	2006-08-30 14:05:01.000000000 -0700
+++ g26/drivers/base/power/suspend.c	2006-08-30 14:05:15.000000000 -0700
@@ -123,33 +123,6 @@ static int suspend_device_late(struct de
 }
 
 /**
- *	device_prepare_suspend - save state and prepare to suspend
- *
- *	NOTE! Devices cannot detach at this point - not only do we
- *	hold the device list semaphores over the whole prepare, but
- *	the whole point is to do non-invasive preparatory work, not
- *	the actual suspend.
- */
-int device_prepare_suspend(pm_message_t state)
-{
-	int error = 0;
-	struct device * dev;
-
-	down(&dpm_sem);
-	down(&dpm_list_sem);
-	list_for_each_entry_reverse(dev, &dpm_active, power.entry) {
-		if (!dev->bus || !dev->bus->suspend_prepare)
-			continue;
-		error = dev->bus->suspend_prepare(dev, state);
-		if (error)
-			break;
-	}
-	up(&dpm_list_sem);
-	up(&dpm_sem);
-	return error;
-}
-
-/**
  *	device_suspend - Save state and stop all devices in system.
  *	@state:		Power state to put each device in.
  *
Index: g26/drivers/pci/pci-driver.c
===================================================================
--- g26.orig/drivers/pci/pci-driver.c	2006-08-30 14:05:01.000000000 -0700
+++ g26/drivers/pci/pci-driver.c	2006-08-30 14:05:15.000000000 -0700
@@ -264,19 +264,6 @@ static int pci_device_remove(struct devi
 	return 0;
 }
 
-static int pci_device_suspend_prepare(struct device * dev, pm_message_t state)
-{
-	struct pci_dev * pci_dev = to_pci_dev(dev);
-	struct pci_driver * drv = pci_dev->driver;
-	int i = 0;
-
-	if (drv && drv->suspend_prepare) {
-		i = drv->suspend_prepare(pci_dev, state);
-		suspend_report_result(drv->suspend_prepare, i);
-	}
-	return i;
-}
-
 static int pci_device_suspend(struct device * dev, pm_message_t state)
 {
 	struct pci_dev * pci_dev = to_pci_dev(dev);
@@ -544,7 +531,6 @@ struct bus_type pci_bus_type = {
 	.uevent		= pci_uevent,
 	.probe		= pci_device_probe,
 	.remove		= pci_device_remove,
-	.suspend_prepare= pci_device_suspend_prepare,
 	.suspend	= pci_device_suspend,
 	.suspend_late	= pci_device_suspend_late,
 	.resume_early	= pci_device_resume_early,
Index: g26/include/linux/device.h
===================================================================
--- g26.orig/include/linux/device.h	2006-08-30 14:05:01.000000000 -0700
+++ g26/include/linux/device.h	2006-08-30 14:05:15.000000000 -0700
@@ -52,7 +52,6 @@ struct bus_type {
 	int		(*remove)(struct device * dev);
 	void		(*shutdown)(struct device * dev);
 
-	int (*suspend_prepare)(struct device * dev, pm_message_t state);
 	int (*suspend)(struct device * dev, pm_message_t state);
 	int (*suspend_late)(struct device * dev, pm_message_t state);
 	int (*resume_early)(struct device * dev);
Index: g26/include/linux/pci.h
===================================================================
--- g26.orig/include/linux/pci.h	2006-08-30 14:05:01.000000000 -0700
+++ g26/include/linux/pci.h	2006-08-30 14:05:15.000000000 -0700
@@ -345,7 +345,6 @@ struct pci_driver {
 	const struct pci_device_id *id_table;	/* must be non-NULL for probe to be called */
 	int  (*probe)  (struct pci_dev *dev, const struct pci_device_id *id);	/* New device inserted */
 	void (*remove) (struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
-	int  (*suspend_prepare) (struct pci_dev *dev, pm_message_t state);
 	int  (*suspend) (struct pci_dev *dev, pm_message_t state);	/* Device suspended */
 	int  (*suspend_late) (struct pci_dev *dev, pm_message_t state);
 	int  (*resume_early) (struct pci_dev *dev);
Index: g26/kernel/power/main.c
===================================================================
--- g26.orig/kernel/power/main.c	2006-08-30 14:05:01.000000000 -0700
+++ g26/kernel/power/main.c	2006-08-30 14:05:15.000000000 -0700
@@ -57,10 +57,6 @@ static int suspend_prepare(suspend_state
 	if (!pm_ops || !pm_ops->enter)
 		return -EPERM;
 
-	error = device_prepare_suspend(PMSG_SUSPEND);
-	if (error)
-		return error;
-
 	pm_prepare_console();
 
 	disable_nonboot_cpus();

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2006-08-30 21:09 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-08-30 21:09 [patch 2.6.18-rc5 + pm patches] PM: no suspend_prepare() phase David Brownell

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox