From: David Brownell <david-b@pacbell.net>
To: Ikhwan Lee <dlrghks@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>,
Pavel Machek <pavel@ucw.cz>,
linux-pm@lists.osdl.org
Subject: Re: Alternative Concept
Date: Thu, 15 Mar 2007 23:17:12 -0700 [thread overview]
Message-ID: <200703152317.13398.david-b@pacbell.net> (raw)
In-Reply-To: <484380240703152056w44d14c71tff4457c07c6bdbbc@mail.gmail.com>
On Thursday 15 March 2007 8:56 pm, Ikhwan Lee wrote:
> Hi,
>
> Although I agree that the current clock framework can handle power or
> voltage domains in many platforms, having something like (struct clk
> powerdomain1, powerdomain2;) does not seem like a good implementation,
> a struct for clocks representing a power domain.
Good thing that's not what I suggested then, right? :)
The point was that in the examples I've seen, the power domains
are associated with clock domains, so that each clock is tied
to one power domain. And since you can't use the power domain
without having a clock ... the implementation can tell if it's
got to activate a power domain by looking at the clock.
There may be other models of power domain, but that's the one
I've had reason to look at (which isn't synonymous with a straight
voltage/current supply).
> If a new framework is more straighforward and introduces a negligible
> overhead to the current kernel, I think it is worthwhile to have a
> look at it. Plus this new framework might be able to take care of
> those platforms that are not nicely supported by the current clock
> framework.
Perhaps when we see one, we could discuss that as somethong other
than pure handwaving. But that still won't address the basic point
that it's wrong to assume the clock framework should be written out
of the picture.
- Dave
next prev parent reply other threads:[~2007-03-16 6:17 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-24 1:23 [RFC] CPUFreq PowerOP integration, Intro 0/3 Eugeny S. Mints
2006-10-07 2:36 ` Alternative Concept [Was: Re: [RFC] CPUFreq PowerOP integration, Intro 0/3] Dominik Brodowski
2006-10-07 3:15 ` Dominik Brodowski
2006-10-08 7:16 ` Pavel Machek
2006-10-12 15:38 ` Mark Gross
2006-10-12 16:02 ` Dominik Brodowski
2006-10-16 21:56 ` Mark Gross
2006-10-17 21:40 ` Matthew Locke
2006-10-12 16:48 ` Pavel Machek
2006-10-12 17:12 ` Vitaly Wool
2006-10-12 17:23 ` Pavel Machek
2006-10-09 18:21 ` Mark Gross
2006-10-26 3:06 ` Dominik Brodowski
2006-10-12 22:43 ` Eugeny S. Mints
2006-10-13 10:55 ` Pavel Machek
2006-10-16 21:44 ` Mark Gross
2006-10-17 8:26 ` Pavel Machek
2006-10-26 3:05 ` Dominik Brodowski
2007-03-13 0:57 ` Alternative Concept Matthew Locke
2007-03-13 11:08 ` Pavel Machek
2007-03-13 20:34 ` Mark Gross
2007-03-14 2:30 ` Ikhwan Lee
2007-03-14 10:43 ` Eugeny S. Mints
2007-03-14 17:19 ` David Brownell
2007-03-14 18:12 ` Igor Stoppa
2007-03-14 18:45 ` David Brownell
2007-03-15 9:53 ` Eugeny S. Mints
2007-03-15 13:04 ` Igor Stoppa
2007-03-16 2:21 ` David Brownell
2007-03-16 3:56 ` Ikhwan Lee
2007-03-16 6:17 ` David Brownell [this message]
2007-03-19 2:27 ` Ikhwan Lee
2007-03-19 6:07 ` David Brownell
2007-03-16 13:06 ` Dmitry Krivoschekov
2007-03-16 18:03 ` David Brownell
2007-03-18 20:25 ` Dmitry Krivoschekov
2007-03-19 4:04 ` David Brownell
2007-03-20 0:03 ` Dmitry Krivoschekov
2007-03-20 8:07 ` David Brownell
2007-03-20 9:45 ` Dmitry Krivoschekov
2007-03-20 10:30 ` Igor Stoppa
2007-03-20 12:13 ` Eugeny S. Mints
2007-03-20 12:39 ` Igor Stoppa
2007-03-20 13:44 ` Dmitry Krivoschekov
2007-03-20 21:03 ` David Brownell
2007-03-20 13:07 ` Dmitry Krivoschekov
2007-03-20 13:52 ` Igor Stoppa
2007-03-20 14:58 ` Dmitry Krivoschekov
2007-03-20 15:36 ` Pavel Machek
2007-03-20 19:16 ` Dmitry Krivoschekov
2007-03-20 20:45 ` Pavel Machek
2007-03-20 22:04 ` David Brownell
2007-03-20 22:06 ` Pavel Machek
2007-03-20 23:29 ` David Brownell
2007-03-20 15:36 ` Igor Stoppa
2007-03-20 19:17 ` Dmitry Krivoschekov
2007-03-20 20:17 ` David Brownell
2007-03-20 20:21 ` David Brownell
2007-03-20 19:58 ` David Brownell
2007-03-24 0:47 ` charging batteries from USB [was: Re: Alternative Concept] Dmitry Krivoschekov
2007-03-24 1:17 ` David Brownell
2007-03-24 1:48 ` Dmitry Krivoschekov
2007-03-24 2:35 ` David Brownell
2007-03-24 10:20 ` Oliver Neukum
2007-03-24 8:36 ` Oliver Neukum
2007-03-14 3:19 ` Alternative Concept Dominik Brodowski
-- strict thread matches above, loose matches on Subject: below --
2007-03-14 22:08 Scott E. Preece
2007-03-14 23:23 ` David Brownell
2007-03-15 7:25 ` Ikhwan Lee
2007-03-15 8:14 ` Amit Kucheria
2007-03-15 10:55 ` Eugeny S. Mints
2007-03-15 10:46 ` Eugeny S. Mints
2007-03-15 10:33 ` Eugeny S. Mints
2007-03-15 13:21 Scott E. Preece
2007-03-15 13:29 Scott E. Preece
2007-03-15 23:07 ` David Brownell
2007-03-15 14:00 Scott E. Preece
2007-03-15 14:38 ` Eugeny S. Mints
2007-03-15 17:33 ` Woodruff, Richard
2007-03-19 14:12 Scott E. Preece
2007-03-20 7:56 ` David Brownell
2007-03-20 14:26 ` Amit Kucheria
2007-03-20 15:08 ` Dmitry Krivoschekov
2007-03-20 17:04 ` David Brownell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200703152317.13398.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=dlrghks@gmail.com \
--cc=linux-pm@lists.osdl.org \
--cc=linux@dominikbrodowski.net \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox