Re: Fwd: Re: [Suspend-devel] s2both on powerpc

["Rafael J. Wysocki" <rjw@sisk.pl>]

On Thursday, 5 April 2007 23:38, David Brownell wrote:
> On Sunday 01 April 2007 9:37 am, Rafael J. Wysocki wrote:
> > Alan, Dave, could you please have a look at this?
> > 
> > Rafael
> > 
> > 
> > ----------  Forwarded Message  ----------
> > 
> > Subject: Re: [Suspend-devel] s2both on powerpc
> > Date: Sunday, 1 April 2007 18:18
> > From: "Cédric Boutillier" <cedric.boutillier@gmail.com>
> > To: "Johannes Berg" <johannes@sipsolutions.net>
> > Cc: "Rafael J. Wysocki" <rjw@sisk.pl>, "Tim Dijkstra" <newsuser@famdijkstra.org>,
> >	 suspend-devel@lists.sourceforge.net 
> > 
> > Hi !
> > On 4/1/07, Johannes Berg <johannes@sipsolutions.net> wrote:
> > > Have you gotten it to resume?
> > > I'd test s2both but I haven't gotten s2disk to resume yet... Need to
> > > test that patch.
> > 
> > Yes it resumes, but I am stuck at some point because after the image
> > is reloaded from swap, the system freezes when (usb) modules are
> > reloaded.
> 
> Which module?  I'm guessing just ehci-hcd, but you should try each
> of the relevant HCDs by themselves.  (And if you have any external
> USB devices connected, their drivers ... and also see whether the
> connection of the external device is itself a factor.)
> 
> There's something platform-specific going on, and some clues will
> be needed to sort it out.
> 
> All this used to work, as I recall...

This has already been handled by Alan (identified as a hardware bug, patch
is available).

Thanks,
Rafael