From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rafael J. Wysocki" Subject: Re: Fwd: Re: [Suspend-devel] s2both on powerpc Date: Fri, 6 Apr 2007 01:32:18 +0200 Message-ID: <200704060132.18897.rjw@sisk.pl> References: <200704011837.16014.rjw@sisk.pl> <200704051438.50653.david-b@pacbell.net> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <200704051438.50653.david-b@pacbell.net> Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.linux-foundation.org Errors-To: linux-pm-bounces@lists.linux-foundation.org To: David Brownell Cc: =?iso-8859-1?q?C=E9dric_Boutillier?= , pm list , Johannes Berg List-Id: linux-pm@vger.kernel.org On Thursday, 5 April 2007 23:38, David Brownell wrote: > On Sunday 01 April 2007 9:37 am, Rafael J. Wysocki wrote: > > Alan, Dave, could you please have a look at this? > > = > > Rafael > > = > > = > > ---------- Forwarded Message ---------- > > = > > Subject: Re: [Suspend-devel] s2both on powerpc > > Date: Sunday, 1 April 2007 18:18 > > From: "C=E9dric Boutillier" > > To: "Johannes Berg" > > Cc: "Rafael J. Wysocki" , "Tim Dijkstra" , > > suspend-devel@lists.sourceforge.net = > > = > > Hi ! > > On 4/1/07, Johannes Berg wrote: > > > Have you gotten it to resume? > > > I'd test s2both but I haven't gotten s2disk to resume yet... Need to > > > test that patch. > > = > > Yes it resumes, but I am stuck at some point because after the image > > is reloaded from swap, the system freezes when (usb) modules are > > reloaded. > = > Which module? I'm guessing just ehci-hcd, but you should try each > of the relevant HCDs by themselves. (And if you have any external > USB devices connected, their drivers ... and also see whether the > connection of the external device is itself a factor.) > = > There's something platform-specific going on, and some clues will > be needed to sort it out. > = > All this used to work, as I recall... This has already been handled by Alan (identified as a hardware bug, patch is available). Thanks, Rafael