* [PATCH -mm 1/5] Hibernation: Introduce SNAPSHOT_GET_IMAGE_SIZE ioctl
[not found] <200709092257.16085.rjw@sisk.pl>
@ 2007-09-09 21:06 ` Rafael J. Wysocki
2007-09-09 21:07 ` [PATCH -mm 2/5] Hibernation: Rework platform support ioctls (rev. 2) Rafael J. Wysocki
` (4 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Rafael J. Wysocki @ 2007-09-09 21:06 UTC (permalink / raw)
To: pm list; +Cc: Johannes Berg, LKML
From: Rafael J. Wysocki <rjw@sisk.pl>
Add a new ioctl, SNAPSHOT_GET_IMAGE_SIZE, returning the size of the (just
created) hibernation image, to the hibernation userland interface.
This ioctl is necessary so that the userland utilities using the interface need
not access the hibernation image header, owned by the kernel, in order to obtain
the size of the image.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Documentation/power/userland-swsusp.txt | 12 +++++-------
kernel/power/power.h | 4 +++-
kernel/power/snapshot.c | 7 ++++++-
kernel/power/user.c | 18 ++++++++++++++----
4 files changed, 28 insertions(+), 13 deletions(-)
Index: linux-2.6.23-rc5/kernel/power/power.h
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/power.h 2007-09-02 12:00:37.000000000 +0200
+++ linux-2.6.23-rc5/kernel/power/power.h 2007-09-02 12:04:26.000000000 +0200
@@ -130,6 +130,7 @@ struct snapshot_handle {
#define data_of(handle) ((handle).buffer + (handle).buf_offset)
extern unsigned int snapshot_additional_pages(struct zone *zone);
+extern unsigned long snapshot_get_image_size(void);
extern int snapshot_read_next(struct snapshot_handle *handle, size_t count);
extern int snapshot_write_next(struct snapshot_handle *handle, size_t count);
extern void snapshot_write_finalize(struct snapshot_handle *handle);
@@ -160,7 +161,8 @@ struct resume_swap_area {
#define SNAPSHOT_PMOPS _IOW(SNAPSHOT_IOC_MAGIC, 12, unsigned int)
#define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \
struct resume_swap_area)
-#define SNAPSHOT_IOC_MAXNR 13
+#define SNAPSHOT_GET_IMAGE_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 14, loff_t)
+#define SNAPSHOT_IOC_MAXNR 14
#define PMOPS_PREPARE 1
#define PMOPS_ENTER 2
Index: linux-2.6.23-rc5/kernel/power/user.c
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/user.c 2007-09-02 00:39:24.000000000 +0200
+++ linux-2.6.23-rc5/kernel/power/user.c 2007-09-02 12:04:26.000000000 +0200
@@ -133,7 +133,7 @@ static int snapshot_ioctl(struct inode *
{
int error = 0;
struct snapshot_data *data;
- loff_t avail;
+ loff_t size;
sector_t offset;
if (_IOC_TYPE(cmd) != SNAPSHOT_IOC_MAGIC)
@@ -210,10 +210,20 @@ static int snapshot_ioctl(struct inode *
image_size = arg;
break;
+ case SNAPSHOT_GET_IMAGE_SIZE:
+ if (!data->ready) {
+ error = -ENODATA;
+ break;
+ }
+ size = snapshot_get_image_size();
+ size <<= PAGE_SHIFT;
+ error = put_user(size, (loff_t __user *)arg);
+ break;
+
case SNAPSHOT_AVAIL_SWAP:
- avail = count_swap_pages(data->swap, 1);
- avail <<= PAGE_SHIFT;
- error = put_user(avail, (loff_t __user *)arg);
+ size = count_swap_pages(data->swap, 1);
+ size <<= PAGE_SHIFT;
+ error = put_user(size, (loff_t __user *)arg);
break;
case SNAPSHOT_GET_SWAP_PAGE:
Index: linux-2.6.23-rc5/kernel/power/snapshot.c
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/snapshot.c 2007-09-02 12:00:37.000000000 +0200
+++ linux-2.6.23-rc5/kernel/power/snapshot.c 2007-09-02 12:04:26.000000000 +0200
@@ -1263,12 +1263,17 @@ static char *check_image_kernel(struct s
}
#endif /* CONFIG_ARCH_HIBERNATION_HEADER */
+unsigned long snapshot_get_image_size(void)
+{
+ return nr_copy_pages + nr_meta_pages + 1;
+}
+
static int init_header(struct swsusp_info *info)
{
memset(info, 0, sizeof(struct swsusp_info));
info->num_physpages = num_physpages;
info->image_pages = nr_copy_pages;
- info->pages = nr_copy_pages + nr_meta_pages + 1;
+ info->pages = snapshot_get_image_size();
info->size = info->pages;
info->size <<= PAGE_SHIFT;
return init_header_complete(info);
Index: linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt
===================================================================
--- linux-2.6.23-rc5.orig/Documentation/power/userland-swsusp.txt 2007-08-29 23:51:50.000000000 +0200
+++ linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt 2007-09-02 12:04:26.000000000 +0200
@@ -54,6 +54,8 @@ SNAPSHOT_SET_IMAGE_SIZE - set the prefer
this number, but if it turns out to be impossible, the kernel will
create the smallest image possible)
+SNAPSHOT_GET_IMAGE_SIZE - return the actual size of the hibernation image
+
SNAPSHOT_AVAIL_SWAP - return the amount of available swap in bytes (the last
argument should be a pointer to an unsigned int variable that will
contain the result if the call is successful).
@@ -136,13 +138,9 @@ required, as they can use, for example,
a file on a partition that is unmounted before SNAPSHOT_ATOMIC_SNAPSHOT and
mounted afterwards.
-These utilities SHOULD NOT make any assumptions regarding the ordering of
-data within the snapshot image, except for the image header that MAY be
-assumed to start with an swsusp_info structure, as specified in
-kernel/power/power.h. This structure MAY be used by the userland utilities
-to obtain some information about the snapshot image, such as the size
-of the snapshot image, including the metadata and the header itself,
-contained in the .size member of swsusp_info.
+These utilities MUST NOT make any assumptions regarding the ordering of
+data within the snapshot image. The contents of the image are entirely owned
+by the kernel and its structure may be changed in future kernel releases.
The snapshot image MUST be written to the kernel unaltered (ie. all of the image
data, metadata and header MUST be written in _exactly_ the same amount, form
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH -mm 2/5] Hibernation: Rework platform support ioctls (rev. 2)
[not found] <200709092257.16085.rjw@sisk.pl>
2007-09-09 21:06 ` [PATCH -mm 1/5] Hibernation: Introduce SNAPSHOT_GET_IMAGE_SIZE ioctl Rafael J. Wysocki
@ 2007-09-09 21:07 ` Rafael J. Wysocki
2007-09-09 21:12 ` [PATCH -mm 3/5] Hibernation: Mark SNAPSHOT_SET_SWAP_FILE ioctl as deprecated " Rafael J. Wysocki
` (3 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Rafael J. Wysocki @ 2007-09-09 21:07 UTC (permalink / raw)
To: pm list; +Cc: Johannes Berg, LKML
From: Rafael J. Wysocki <rjw@sisk.pl>
Modify the hibernation userland interface by adding two new ioctls to it,
SNAPSHOT_PLATFORM_SUPPORT and SNAPSHOT_POWER_OFF, that can be used,
respectively, to switch the hibernation platform support on/off and to make the
kernel transition the system to the hibernation state (eg. ACPI S4) using the
platform (eg. ACPI) driver.
These ioctls are intended to replace the misdesigned SNAPSHOT_PMOPS ioctl,
which from now is regarded as obsolete and will be removed in the future.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Documentation/power/userland-swsusp.txt | 24 ++++---------------
kernel/power/power.h | 9 ++-----
kernel/power/user.c | 39 +++++++++++++++++++++++---------
3 files changed, 38 insertions(+), 34 deletions(-)
Index: linux-2.6.23-rc5/kernel/power/power.h
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/power.h 2007-09-02 12:04:26.000000000 +0200
+++ linux-2.6.23-rc5/kernel/power/power.h 2007-09-02 12:04:42.000000000 +0200
@@ -158,15 +158,12 @@ struct resume_swap_area {
#define SNAPSHOT_FREE_SWAP_PAGES _IO(SNAPSHOT_IOC_MAGIC, 9)
#define SNAPSHOT_SET_SWAP_FILE _IOW(SNAPSHOT_IOC_MAGIC, 10, unsigned int)
#define SNAPSHOT_S2RAM _IO(SNAPSHOT_IOC_MAGIC, 11)
-#define SNAPSHOT_PMOPS _IOW(SNAPSHOT_IOC_MAGIC, 12, unsigned int)
#define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \
struct resume_swap_area)
#define SNAPSHOT_GET_IMAGE_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 14, loff_t)
-#define SNAPSHOT_IOC_MAXNR 14
-
-#define PMOPS_PREPARE 1
-#define PMOPS_ENTER 2
-#define PMOPS_FINISH 3
+#define SNAPSHOT_PLATFORM_SUPPORT _IO(SNAPSHOT_IOC_MAGIC, 15)
+#define SNAPSHOT_POWER_OFF _IO(SNAPSHOT_IOC_MAGIC, 16)
+#define SNAPSHOT_IOC_MAXNR 16
/* If unset, the snapshot device cannot be open. */
extern atomic_t snapshot_device_available;
Index: linux-2.6.23-rc5/kernel/power/user.c
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/user.c 2007-09-02 12:04:26.000000000 +0200
+++ linux-2.6.23-rc5/kernel/power/user.c 2007-09-02 12:04:42.000000000 +0200
@@ -28,6 +28,18 @@
#include "power.h"
+/*
+ * NOTE: The SNAPSHOT_PMOPS ioctl is obsolete and will be removed in the
+ * future. It is only preserved here for compatibility with existing userland
+ * utilities.
+ */
+#define SNAPSHOT_PMOPS _IOW(SNAPSHOT_IOC_MAGIC, 12, unsigned int)
+
+#define PMOPS_PREPARE 1
+#define PMOPS_ENTER 2
+#define PMOPS_FINISH 3
+
+
#define SNAPSHOT_MINOR 231
static struct snapshot_data {
@@ -36,7 +48,7 @@ static struct snapshot_data {
int mode;
char frozen;
char ready;
- char platform_suspend;
+ char platform_support;
} snapshot_state;
atomic_t snapshot_device_available = ATOMIC_INIT(1);
@@ -70,7 +82,7 @@ static int snapshot_open(struct inode *i
}
data->frozen = 0;
data->ready = 0;
- data->platform_suspend = 0;
+ data->platform_support = 0;
return 0;
}
@@ -183,7 +195,7 @@ static int snapshot_ioctl(struct inode *
error = -EPERM;
break;
}
- error = hibernation_snapshot(data->platform_suspend);
+ error = hibernation_snapshot(data->platform_support);
if (!error)
error = put_user(in_suspend, (unsigned int __user *)arg);
if (!error)
@@ -197,7 +209,7 @@ static int snapshot_ioctl(struct inode *
error = -EPERM;
break;
}
- error = hibernation_restore(data->platform_suspend);
+ error = hibernation_restore(data->platform_support);
break;
case SNAPSHOT_FREE:
@@ -285,26 +297,33 @@ static int snapshot_ioctl(struct inode *
mutex_unlock(&pm_mutex);
break;
- case SNAPSHOT_PMOPS:
+ case SNAPSHOT_PLATFORM_SUPPORT:
+ data->platform_support = !!arg;
+ break;
+
+ case SNAPSHOT_POWER_OFF:
+ if (data->platform_support)
+ error = hibernation_platform_enter();
+ break;
+
+ case SNAPSHOT_PMOPS: /* This ioctl is deprecated */
error = -EINVAL;
switch (arg) {
case PMOPS_PREPARE:
- data->platform_suspend = 1;
+ data->platform_support = 1;
error = 0;
break;
case PMOPS_ENTER:
- if (data->platform_suspend)
+ if (data->platform_support)
error = hibernation_platform_enter();
-
break;
case PMOPS_FINISH:
- if (data->platform_suspend)
+ if (data->platform_support)
error = 0;
-
break;
default:
Index: linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt
===================================================================
--- linux-2.6.23-rc5.orig/Documentation/power/userland-swsusp.txt 2007-09-02 12:04:26.000000000 +0200
+++ linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt 2007-09-02 12:04:42.000000000 +0200
@@ -85,6 +85,12 @@ SNAPSHOT_SET_SWAP_AREA - set the resume
recommended to always use this call, because the code to set the resume
partition may be removed from future kernels
+SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support,
+ depending on the argument value (enable, if the argument is nonzero)
+
+SNAPSHOT_POWER_OFF - make the kernel transition the system to the hibernation
+ state (eg. ACPI S4) using the platform (eg. ACPI) driver
+
SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to
immediately enter the suspend-to-RAM state, so this call must always
be preceded by the SNAPSHOT_FREEZE call and it is also necessary
@@ -95,24 +101,6 @@ SNAPSHOT_S2RAM - suspend to RAM; using t
to resume the system from RAM if there's enough battery power or restore
its state on the basis of the saved suspend image otherwise)
-SNAPSHOT_PMOPS - enable the usage of the hibernation_ops->prepare,
- hibernate_ops->enter and hibernation_ops->finish methods (the in-kernel
- swsusp knows these as the "platform method") which are needed on many
- machines to (among others) speed up the resume by letting the BIOS skip
- some steps or to let the system recognise the correct state of the
- hardware after the resume (in particular on many machines this ensures
- that unplugged AC adapters get correctly detected and that kacpid does
- not run wild after the resume). The last ioctl() argument can take one
- of the three values, defined in kernel/power/power.h:
- PMOPS_PREPARE - make the kernel carry out the
- hibernation_ops->prepare() operation
- PMOPS_ENTER - make the kernel power off the system by calling
- hibernation_ops->enter()
- PMOPS_FINISH - make the kernel carry out the
- hibernation_ops->finish() operation
- Note that the actual constants are misnamed because they surface
- internal kernel implementation details that have changed.
-
The device's read() operation can be used to transfer the snapshot image from
the kernel. It has the following limitations:
- you cannot read() more than one virtual memory page at a time
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH -mm 3/5] Hibernation: Mark SNAPSHOT_SET_SWAP_FILE ioctl as deprecated (rev. 2)
[not found] <200709092257.16085.rjw@sisk.pl>
2007-09-09 21:06 ` [PATCH -mm 1/5] Hibernation: Introduce SNAPSHOT_GET_IMAGE_SIZE ioctl Rafael J. Wysocki
2007-09-09 21:07 ` [PATCH -mm 2/5] Hibernation: Rework platform support ioctls (rev. 2) Rafael J. Wysocki
@ 2007-09-09 21:12 ` Rafael J. Wysocki
2007-09-09 21:12 ` [PATCH -mm 4/5] Hibernation: Correct definitions of some ioctls " Rafael J. Wysocki
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Rafael J. Wysocki @ 2007-09-09 21:12 UTC (permalink / raw)
To: pm list; +Cc: Johannes Berg, LKML
From: Rafael J. Wysocki <rjw@sisk.pl>
Mark the SNAPSHOT_SET_SWAP_FILE ioctl belonging to the hibernation userland
interface as deprecated.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
Documentation/power/userland-swsusp.txt | 14 ++------------
kernel/power/power.h | 1 -
kernel/power/user.c | 9 +++++----
3 files changed, 7 insertions(+), 17 deletions(-)
Index: linux-2.6.23-rc5/kernel/power/power.h
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/power.h 2007-09-09 22:30:21.000000000 +0200
+++ linux-2.6.23-rc5/kernel/power/power.h 2007-09-09 22:30:36.000000000 +0200
@@ -156,7 +156,6 @@ struct resume_swap_area {
#define SNAPSHOT_AVAIL_SWAP _IOR(SNAPSHOT_IOC_MAGIC, 7, void *)
#define SNAPSHOT_GET_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 8, void *)
#define SNAPSHOT_FREE_SWAP_PAGES _IO(SNAPSHOT_IOC_MAGIC, 9)
-#define SNAPSHOT_SET_SWAP_FILE _IOW(SNAPSHOT_IOC_MAGIC, 10, unsigned int)
#define SNAPSHOT_S2RAM _IO(SNAPSHOT_IOC_MAGIC, 11)
#define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \
struct resume_swap_area)
Index: linux-2.6.23-rc5/kernel/power/user.c
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/user.c 2007-09-09 22:30:21.000000000 +0200
+++ linux-2.6.23-rc5/kernel/power/user.c 2007-09-09 22:30:36.000000000 +0200
@@ -29,10 +29,11 @@
#include "power.h"
/*
- * NOTE: The SNAPSHOT_PMOPS ioctl is obsolete and will be removed in the
- * future. It is only preserved here for compatibility with existing userland
- * utilities.
+ * NOTE: The SNAPSHOT_SET_SWAP_FILE and SNAPSHOT_PMOPS ioctls are obsolete and
+ * will be removed in the future. They are only preserved here for
+ * compatibility with existing userland utilities.
*/
+#define SNAPSHOT_SET_SWAP_FILE _IOW(SNAPSHOT_IOC_MAGIC, 10, unsigned int)
#define SNAPSHOT_PMOPS _IOW(SNAPSHOT_IOC_MAGIC, 12, unsigned int)
#define PMOPS_PREPARE 1
@@ -260,7 +261,7 @@ static int snapshot_ioctl(struct inode *
free_all_swap_pages(data->swap);
break;
- case SNAPSHOT_SET_SWAP_FILE:
+ case SNAPSHOT_SET_SWAP_FILE: /* This ioctl is deprecated */
if (!swsusp_swap_in_use()) {
/*
* User space encodes device types as two-byte values,
Index: linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt
===================================================================
--- linux-2.6.23-rc5.orig/Documentation/power/userland-swsusp.txt 2007-09-09 22:30:21.000000000 +0200
+++ linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt 2007-09-09 22:32:45.000000000 +0200
@@ -67,23 +67,13 @@ SNAPSHOT_GET_SWAP_PAGE - allocate a swap
SNAPSHOT_FREE_SWAP_PAGES - free all swap pages allocated with
SNAPSHOT_GET_SWAP_PAGE
-SNAPSHOT_SET_SWAP_FILE - set the resume partition (the last ioctl() argument
- should specify the device's major and minor numbers in the old
- two-byte format, as returned by the stat() function in the .st_rdev
- member of the stat structure)
-
SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE>
units) from the beginning of the partition at which the swap header is
located (the last ioctl() argument should point to a struct
resume_swap_area, as defined in kernel/power/power.h, containing the
- resume device specification, as for the SNAPSHOT_SET_SWAP_FILE ioctl(),
- and the offset); for swap partitions the offset is always 0, but it is
- different to zero for swap files (please see
+ resume device specification and the offset); for swap partitions the
+ offset is always 0, but it is different from zero for swap files (see
Documentation/swsusp-and-swap-files.txt for details).
- The SNAPSHOT_SET_SWAP_AREA ioctl() is considered as a replacement for
- SNAPSHOT_SET_SWAP_FILE which is regarded as obsolete. It is
- recommended to always use this call, because the code to set the resume
- partition may be removed from future kernels
SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support,
depending on the argument value (enable, if the argument is nonzero)
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH -mm 4/5] Hibernation: Correct definitions of some ioctls (rev. 2)
[not found] <200709092257.16085.rjw@sisk.pl>
` (2 preceding siblings ...)
2007-09-09 21:12 ` [PATCH -mm 3/5] Hibernation: Mark SNAPSHOT_SET_SWAP_FILE ioctl as deprecated " Rafael J. Wysocki
@ 2007-09-09 21:12 ` Rafael J. Wysocki
2007-09-09 21:18 ` [PATCH -mm 5/5] Hibernation: Introduce exportable suspend ioctls header " Rafael J. Wysocki
[not found] ` <200709092312.52889.rjw@sisk.pl>
5 siblings, 0 replies; 9+ messages in thread
From: Rafael J. Wysocki @ 2007-09-09 21:12 UTC (permalink / raw)
To: pm list; +Cc: Johannes Berg, LKML
From: Rafael J. Wysocki <rjw@sisk.pl>
Three ioctl numbers belonging to the hibernation userland interface,
SNAPSHOT_ATOMIC_SNAPSHOT, SNAPSHOT_SET_IMAGE_SIZE, SNAPSHOT_AVAIL_SWAP,
SNAPSHOT_GET_SWAP_PAGE, are defined in a wrong way (eg. not portable). Provide
new ioctl numbers for these ioctls and mark the existing ones as deprecated.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
Documentation/power/userland-swsusp.txt | 26 +++++++++++++-------------
kernel/power/power.h | 10 +++++-----
kernel/power/user.c | 18 ++++++++++++++++--
3 files changed, 34 insertions(+), 20 deletions(-)
Index: linux-2.6.23-rc5/kernel/power/power.h
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/power.h 2007-09-09 22:30:36.000000000 +0200
+++ linux-2.6.23-rc5/kernel/power/power.h 2007-09-09 22:36:10.000000000 +0200
@@ -149,12 +149,8 @@ struct resume_swap_area {
#define SNAPSHOT_IOC_MAGIC '3'
#define SNAPSHOT_FREEZE _IO(SNAPSHOT_IOC_MAGIC, 1)
#define SNAPSHOT_UNFREEZE _IO(SNAPSHOT_IOC_MAGIC, 2)
-#define SNAPSHOT_ATOMIC_SNAPSHOT _IOW(SNAPSHOT_IOC_MAGIC, 3, void *)
#define SNAPSHOT_ATOMIC_RESTORE _IO(SNAPSHOT_IOC_MAGIC, 4)
#define SNAPSHOT_FREE _IO(SNAPSHOT_IOC_MAGIC, 5)
-#define SNAPSHOT_SET_IMAGE_SIZE _IOW(SNAPSHOT_IOC_MAGIC, 6, unsigned long)
-#define SNAPSHOT_AVAIL_SWAP _IOR(SNAPSHOT_IOC_MAGIC, 7, void *)
-#define SNAPSHOT_GET_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 8, void *)
#define SNAPSHOT_FREE_SWAP_PAGES _IO(SNAPSHOT_IOC_MAGIC, 9)
#define SNAPSHOT_S2RAM _IO(SNAPSHOT_IOC_MAGIC, 11)
#define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \
@@ -162,7 +158,11 @@ struct resume_swap_area {
#define SNAPSHOT_GET_IMAGE_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 14, loff_t)
#define SNAPSHOT_PLATFORM_SUPPORT _IO(SNAPSHOT_IOC_MAGIC, 15)
#define SNAPSHOT_POWER_OFF _IO(SNAPSHOT_IOC_MAGIC, 16)
-#define SNAPSHOT_IOC_MAXNR 16
+#define SNAPSHOT_CREATE_IMAGE _IOW(SNAPSHOT_IOC_MAGIC, 17, int)
+#define SNAPSHOT_PREF_IMAGE_SIZE _IO(SNAPSHOT_IOC_MAGIC, 18)
+#define SNAPSHOT_AVAIL_SWAP_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 19, loff_t)
+#define SNAPSHOT_ALLOC_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 20, loff_t)
+#define SNAPSHOT_IOC_MAXNR 20
/* If unset, the snapshot device cannot be open. */
extern atomic_t snapshot_device_available;
Index: linux-2.6.23-rc5/kernel/power/user.c
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/user.c 2007-09-09 22:30:36.000000000 +0200
+++ linux-2.6.23-rc5/kernel/power/user.c 2007-09-09 22:37:11.000000000 +0200
@@ -40,6 +40,16 @@
#define PMOPS_ENTER 2
#define PMOPS_FINISH 3
+/*
+ * NOTE: The following ioctl definitions are wrong and have been replaced with
+ * correct ones. They are only preserved here for compatibility with existing
+ * userland utilities and will be removed in the future.
+ */
+#define SNAPSHOT_ATOMIC_SNAPSHOT _IOW(SNAPSHOT_IOC_MAGIC, 3, void *)
+#define SNAPSHOT_SET_IMAGE_SIZE _IOW(SNAPSHOT_IOC_MAGIC, 6, unsigned long)
+#define SNAPSHOT_AVAIL_SWAP _IOR(SNAPSHOT_IOC_MAGIC, 7, void *)
+#define SNAPSHOT_GET_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 8, void *)
+
#define SNAPSHOT_MINOR 231
@@ -191,6 +201,7 @@ static int snapshot_ioctl(struct inode *
data->frozen = 0;
break;
+ case SNAPSHOT_CREATE_IMAGE:
case SNAPSHOT_ATOMIC_SNAPSHOT:
if (data->mode != O_RDONLY || !data->frozen || data->ready) {
error = -EPERM;
@@ -198,7 +209,7 @@ static int snapshot_ioctl(struct inode *
}
error = hibernation_snapshot(data->platform_support);
if (!error)
- error = put_user(in_suspend, (unsigned int __user *)arg);
+ error = put_user(in_suspend, (int __user *)arg);
if (!error)
data->ready = 1;
break;
@@ -219,6 +230,7 @@ static int snapshot_ioctl(struct inode *
data->ready = 0;
break;
+ case SNAPSHOT_PREF_IMAGE_SIZE:
case SNAPSHOT_SET_IMAGE_SIZE:
image_size = arg;
break;
@@ -233,12 +245,14 @@ static int snapshot_ioctl(struct inode *
error = put_user(size, (loff_t __user *)arg);
break;
+ case SNAPSHOT_AVAIL_SWAP_SIZE:
case SNAPSHOT_AVAIL_SWAP:
size = count_swap_pages(data->swap, 1);
size <<= PAGE_SHIFT;
error = put_user(size, (loff_t __user *)arg);
break;
+ case SNAPSHOT_ALLOC_SWAP_PAGE:
case SNAPSHOT_GET_SWAP_PAGE:
if (data->swap < 0 || data->swap >= MAX_SWAPFILES) {
error = -ENODEV;
@@ -247,7 +261,7 @@ static int snapshot_ioctl(struct inode *
offset = alloc_swapdev_block(data->swap);
if (offset) {
offset <<= PAGE_SHIFT;
- error = put_user(offset, (sector_t __user *)arg);
+ error = put_user(offset, (loff_t __user *)arg);
} else {
error = -ENOSPC;
}
Index: linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt
===================================================================
--- linux-2.6.23-rc5.orig/Documentation/power/userland-swsusp.txt 2007-09-09 22:32:45.000000000 +0200
+++ linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt 2007-09-09 22:38:02.000000000 +0200
@@ -27,17 +27,17 @@ once at a time.
The ioctl() commands recognized by the device are:
SNAPSHOT_FREEZE - freeze user space processes (the current process is
- not frozen); this is required for SNAPSHOT_ATOMIC_SNAPSHOT
+ not frozen); this is required for SNAPSHOT_CREATE_IMAGE
and SNAPSHOT_ATOMIC_RESTORE to succeed
SNAPSHOT_UNFREEZE - thaw user space processes frozen by SNAPSHOT_FREEZE
-SNAPSHOT_ATOMIC_SNAPSHOT - create a snapshot of the system memory; the
+SNAPSHOT_CREATE_IMAGE - create a snapshot of the system memory; the
last argument of ioctl() should be a pointer to an int variable,
the value of which will indicate whether the call returned after
creating the snapshot (1) or after restoring the system memory state
from it (0) (after resume the system finds itself finishing the
- SNAPSHOT_ATOMIC_SNAPSHOT ioctl() again); after the snapshot
+ SNAPSHOT_CREATE_IMAGE ioctl() again); after the snapshot
has been created the read() operation can be used to transfer
it out of the kernel
@@ -49,23 +49,23 @@ SNAPSHOT_ATOMIC_RESTORE - restore the sy
SNAPSHOT_FREE - free memory allocated for the snapshot image
-SNAPSHOT_SET_IMAGE_SIZE - set the preferred maximum size of the image
+SNAPSHOT_PREF_IMAGE_SIZE - set the preferred maximum size of the image
(the kernel will do its best to ensure the image size will not exceed
this number, but if it turns out to be impossible, the kernel will
create the smallest image possible)
SNAPSHOT_GET_IMAGE_SIZE - return the actual size of the hibernation image
-SNAPSHOT_AVAIL_SWAP - return the amount of available swap in bytes (the last
- argument should be a pointer to an unsigned int variable that will
+SNAPSHOT_AVAIL_SWAP_SIZE - return the amount of available swap in bytes (the
+ last argument should be a pointer to an unsigned int variable that will
contain the result if the call is successful).
-SNAPSHOT_GET_SWAP_PAGE - allocate a swap page from the resume partition
+SNAPSHOT_ALLOC_SWAP_PAGE - allocate a swap page from the resume partition
(the last argument should be a pointer to a loff_t variable that
will contain the swap page offset if the call is successful)
-SNAPSHOT_FREE_SWAP_PAGES - free all swap pages allocated with
- SNAPSHOT_GET_SWAP_PAGE
+SNAPSHOT_FREE_SWAP_PAGES - free all swap pages allocated by
+ SNAPSHOT_ALLOC_SWAP_PAGE
SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE>
units) from the beginning of the partition at which the swap header is
@@ -102,7 +102,7 @@ The device's write() operation is used f
into the kernel. It has the same limitations as the read() operation.
The release() operation frees all memory allocated for the snapshot image
-and all swap pages allocated with SNAPSHOT_GET_SWAP_PAGE (if any).
+and all swap pages allocated with SNAPSHOT_ALLOC_SWAP_PAGE (if any).
Thus it is not necessary to use either SNAPSHOT_FREE or
SNAPSHOT_FREE_SWAP_PAGES before closing the device (in fact it will also
unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are
@@ -113,7 +113,7 @@ snapshot image from/to the kernel will u
partition, or a swap file as storage space (if a swap file is used, the resume
partition is the partition that holds this file). However, this is not really
required, as they can use, for example, a special (blank) suspend partition or
-a file on a partition that is unmounted before SNAPSHOT_ATOMIC_SNAPSHOT and
+a file on a partition that is unmounted before SNAPSHOT_CREATE_IMAGE and
mounted afterwards.
These utilities MUST NOT make any assumptions regarding the ordering of
@@ -135,7 +135,7 @@ means, such as checksums, to ensure the
The suspending and resuming utilities MUST lock themselves in memory,
preferrably using mlockall(), before calling SNAPSHOT_FREEZE.
-The suspending utility MUST check the value stored by SNAPSHOT_ATOMIC_SNAPSHOT
+The suspending utility MUST check the value stored by SNAPSHOT_CREATE_IMAGE
in the memory location pointed to by the last argument of ioctl() and proceed
in accordance with it:
1. If the value is 1 (ie. the system memory snapshot has just been
@@ -149,7 +149,7 @@ in accordance with it:
image has been saved.
(b) The suspending utility SHOULD NOT attempt to perform any
file system operations (including reads) on the file systems
- that were mounted before SNAPSHOT_ATOMIC_SNAPSHOT has been
+ that were mounted before SNAPSHOT_CREATE_IMAGE has been
called. However, it MAY mount a file system that was not
mounted at that time and perform some operations on it (eg.
use it for saving the image).
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH -mm 5/5] Hibernation: Introduce exportable suspend ioctls header (rev. 2)
[not found] <200709092257.16085.rjw@sisk.pl>
` (3 preceding siblings ...)
2007-09-09 21:12 ` [PATCH -mm 4/5] Hibernation: Correct definitions of some ioctls " Rafael J. Wysocki
@ 2007-09-09 21:18 ` Rafael J. Wysocki
2007-09-18 8:51 ` Pavel Machek
[not found] ` <200709092312.52889.rjw@sisk.pl>
5 siblings, 1 reply; 9+ messages in thread
From: Rafael J. Wysocki @ 2007-09-09 21:18 UTC (permalink / raw)
To: pm list; +Cc: Johannes Berg, LKML
From: Rafael J. Wysocki <rjw@sisk.pl>
Move the definitions of hibernation ioctls to a separate header file in
include/linux, which can be exported to the user space.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
Documentation/power/userland-swsusp.txt | 10 +++++-----
include/linux/Kbuild | 1 +
include/linux/suspend_ioctls.h | 32 ++++++++++++++++++++++++++++++++
kernel/power/power.h | 29 +----------------------------
4 files changed, 39 insertions(+), 33 deletions(-)
Index: linux-2.6.23-rc5/include/linux/suspend_ioctls.h
===================================================================
--- /dev/null
+++ linux-2.6.23-rc5/include/linux/suspend_ioctls.h
@@ -0,0 +1,32 @@
+#ifndef _LINUX_SUSPEND_IOCTLS_H
+#define _LINUX_SUSPEND_IOCTLS_H
+
+/*
+ * This structure is used to pass the values needed for the identification
+ * of the resume swap area from a user space to the kernel via the
+ * SNAPSHOT_SET_SWAP_AREA ioctl
+ */
+struct resume_swap_area {
+ loff_t offset;
+ u_int32_t dev;
+} __attribute__((packed));
+
+#define SNAPSHOT_IOC_MAGIC '3'
+#define SNAPSHOT_FREEZE _IO(SNAPSHOT_IOC_MAGIC, 1)
+#define SNAPSHOT_UNFREEZE _IO(SNAPSHOT_IOC_MAGIC, 2)
+#define SNAPSHOT_ATOMIC_RESTORE _IO(SNAPSHOT_IOC_MAGIC, 4)
+#define SNAPSHOT_FREE _IO(SNAPSHOT_IOC_MAGIC, 5)
+#define SNAPSHOT_FREE_SWAP_PAGES _IO(SNAPSHOT_IOC_MAGIC, 9)
+#define SNAPSHOT_S2RAM _IO(SNAPSHOT_IOC_MAGIC, 11)
+#define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \
+ struct resume_swap_area)
+#define SNAPSHOT_GET_IMAGE_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 14, loff_t)
+#define SNAPSHOT_PLATFORM_SUPPORT _IO(SNAPSHOT_IOC_MAGIC, 15)
+#define SNAPSHOT_POWER_OFF _IO(SNAPSHOT_IOC_MAGIC, 16)
+#define SNAPSHOT_CREATE_IMAGE _IOW(SNAPSHOT_IOC_MAGIC, 17, int)
+#define SNAPSHOT_PREF_IMAGE_SIZE _IO(SNAPSHOT_IOC_MAGIC, 18)
+#define SNAPSHOT_AVAIL_SWAP_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 19, loff_t)
+#define SNAPSHOT_ALLOC_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 20, loff_t)
+#define SNAPSHOT_IOC_MAXNR 20
+
+#endif /* _LINUX_SUSPEND_IOCTLS_H */
Index: linux-2.6.23-rc5/kernel/power/power.h
===================================================================
--- linux-2.6.23-rc5.orig/kernel/power/power.h
+++ linux-2.6.23-rc5/kernel/power/power.h
@@ -1,4 +1,5 @@
#include <linux/suspend.h>
+#include <linux/suspend_ioctls.h>
#include <linux/utsname.h>
struct swsusp_info {
@@ -136,34 +137,6 @@ extern int snapshot_write_next(struct sn
extern void snapshot_write_finalize(struct snapshot_handle *handle);
extern int snapshot_image_loaded(struct snapshot_handle *handle);
-/*
- * This structure is used to pass the values needed for the identification
- * of the resume swap area from a user space to the kernel via the
- * SNAPSHOT_SET_SWAP_AREA ioctl
- */
-struct resume_swap_area {
- loff_t offset;
- u_int32_t dev;
-} __attribute__((packed));
-
-#define SNAPSHOT_IOC_MAGIC '3'
-#define SNAPSHOT_FREEZE _IO(SNAPSHOT_IOC_MAGIC, 1)
-#define SNAPSHOT_UNFREEZE _IO(SNAPSHOT_IOC_MAGIC, 2)
-#define SNAPSHOT_ATOMIC_RESTORE _IO(SNAPSHOT_IOC_MAGIC, 4)
-#define SNAPSHOT_FREE _IO(SNAPSHOT_IOC_MAGIC, 5)
-#define SNAPSHOT_FREE_SWAP_PAGES _IO(SNAPSHOT_IOC_MAGIC, 9)
-#define SNAPSHOT_S2RAM _IO(SNAPSHOT_IOC_MAGIC, 11)
-#define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \
- struct resume_swap_area)
-#define SNAPSHOT_GET_IMAGE_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 14, loff_t)
-#define SNAPSHOT_PLATFORM_SUPPORT _IO(SNAPSHOT_IOC_MAGIC, 15)
-#define SNAPSHOT_POWER_OFF _IO(SNAPSHOT_IOC_MAGIC, 16)
-#define SNAPSHOT_CREATE_IMAGE _IOW(SNAPSHOT_IOC_MAGIC, 17, int)
-#define SNAPSHOT_PREF_IMAGE_SIZE _IO(SNAPSHOT_IOC_MAGIC, 18)
-#define SNAPSHOT_AVAIL_SWAP_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 19, loff_t)
-#define SNAPSHOT_ALLOC_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 20, loff_t)
-#define SNAPSHOT_IOC_MAXNR 20
-
/* If unset, the snapshot device cannot be open. */
extern atomic_t snapshot_device_available;
Index: linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt
===================================================================
--- linux-2.6.23-rc5.orig/Documentation/power/userland-swsusp.txt
+++ linux-2.6.23-rc5/Documentation/power/userland-swsusp.txt
@@ -14,7 +14,7 @@ are going to develop your own suspend/re
The interface consists of a character device providing the open(),
release(), read(), and write() operations as well as several ioctl()
-commands defined in kernel/power/power.h. The major and minor
+commands defined in include/linux/suspend_ioctls.h . The major and minor
numbers of the device are, respectively, 10 and 231, and they can
be read from /sys/class/misc/snapshot/dev.
@@ -70,10 +70,10 @@ SNAPSHOT_FREE_SWAP_PAGES - free all swap
SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE>
units) from the beginning of the partition at which the swap header is
located (the last ioctl() argument should point to a struct
- resume_swap_area, as defined in kernel/power/power.h, containing the
- resume device specification and the offset); for swap partitions the
- offset is always 0, but it is different from zero for swap files (see
- Documentation/swsusp-and-swap-files.txt for details).
+ resume_swap_area, as defined in kernel/power/suspend_ioctls.h,
+ containing the resume device specification and the offset); for swap
+ partitions the offset is always 0, but it is different from zero for
+ swap files (see Documentation/swsusp-and-swap-files.txt for details).
SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support,
depending on the argument value (enable, if the argument is nonzero)
Index: linux-2.6.23-rc5/include/linux/Kbuild
===================================================================
--- linux-2.6.23-rc5.orig/include/linux/Kbuild
+++ linux-2.6.23-rc5/include/linux/Kbuild
@@ -144,6 +144,7 @@ header-y += snmp.h
header-y += sockios.h
header-y += som.h
header-y += sound.h
+header-y += suspend_ioctls.h
header-y += taskstats.h
header-y += telephony.h
header-y += termios.h
^ permalink raw reply [flat|nested] 9+ messages in thread[parent not found: <200709092312.52889.rjw@sisk.pl>]