Re: 2.6.25-mm1: not looking good

[Pavel Machek <pavel@ucw.cz>]

Hi!

> On Fri, 18 Apr 2008 00:50:34 -0700 Andrew Morton <akpm@linux-foundation.org> wrote:
> 
> > dmesg: http://userweb.kernel.org/~akpm/x.txt
> > config: http://userweb.kernel.org/~akpm/config-t61p.txt
> 
> oop, there's more:
> 
> 
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> firewire_core: created device fw0: GUID 00016c2000174bad, S400
> PM: Device usb4 failed to restore: error -113
> eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
> eth0: 10/100 speed: disabling TSO
> PM: Device usb5 failed to restore: error -113
> PM: Device usb7 failed to restore: error -113
> sd 0:0:0:0: [sda] Starting disk
> PM: Image restored successfully.
> Restarting tasks ... done.
> PM: Basic memory bitmaps freed
> 
> Those USB restore failures are new.  They're similar to the ones on the
> doesnt-resume-properly-any-more Vaio.  They came out from the machine's
> second (successful) resume-from-disk.

I got USB messages after s2ram + suspend to disk combination, too, but
machine seems to work.

ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
PM: Device usb2 failed to restore: error -113
PM: Device usb3 failed to restore: error -113
PM: Device usb4 failed to restore: error -113
PM: Image restored successfully.
Restarting tasks ... done.
PM: Basic memory bitmaps freed
wlan0: RX disassociation from 00:11:2f:0e:95:a0 (reason=7)
wlan0: disassociated

(Apart from some wireless problems, solved by reconnecting...)

(And ipw3945 LED indication now seems to work, good!)
									Pavel 

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html