From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rafael J. Wysocki" Subject: Re: Problem on Suspend to RAM vs ext3 Date: Mon, 16 Jun 2008 15:30:49 +0200 Message-ID: <200806161530.49979.rjw@sisk.pl> References: <48560D3E.8060303@st.com> <200806161458.22706.rjw@sisk.pl> <485668F9.3080502@st.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <485668F9.3080502@st.com> Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.linux-foundation.org Errors-To: linux-pm-bounces@lists.linux-foundation.org To: Francesco VIRLINZI Cc: linux-pm@lists.linux-foundation.org List-Id: linux-pm@vger.kernel.org On Monday, 16 of June 2008, Francesco VIRLINZI wrote: > Hi Rafael > It seems there is a problem with the journal FS. > As you can see in the following dmesg but at the moment I don't know > more than that. > Do you know if someone has an issue like that? This is a problem with the SATA driver IMO. There's a good chance it's been fixed in one of the more recent kernels. Please try 2.6.25.x. Thanks, Rafael > sd 0:0:1:0: [sda] Starting disk > ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > ata1.01: cmd 40/00:01:00:00:00/00:00:00:00:00/f0 tag 0 cdb 0x0 data 0 > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > ata1: port is slow to respond, please be patient (Status 0xd0) > ata1: device not ready (errno=-16), forcing hardreset > ata1: soft resetting port > ata1.01: failed to IDENTIFY (I/O error, err_mask=0x3) > ata1.01: revalidation failed (errno=-5) > ata1: failed to recover some devices, retrying in 5 secs > ata1: soft resetting port > ata1.01: failed to IDENTIFY (I/O error, err_mask=0x3) > ata1.01: revalidation failed (errno=-5) > ata1.01: limiting speed to UDMA7:PIO5 > ata1: failed to recover some devices, retrying in 5 secs > ata1: soft resetting port > ata1.01: failed to IDENTIFY (I/O error, err_mask=0x3) > ata1.01: revalidation failed (errno=-5) > ata1.01: disabled > ata1: EH pending after completion, repeating EH (cnt=4) > ata1: soft resetting port > ata1: EH complete > sd 0:0:1:0: [sda] START_STOP FAILED > sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > Restarting tasks ... done. > sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > end_request: I/O error, dev sda, sector 6042767 > Buffer I/O error on device sda1, logical block 755338 > lost page write due to I/O error on sda1 > sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > end_request: I/O error, dev sda, sector 6042927 > Buffer I/O error on device sda1, logical block 755358 > lost page write due to I/O error on sda1 > sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > end_request: I/O error, dev sda, sector 6042839 > Buffer I/O error on device sda1, logical block 755347 > lost page write due to I/O error on sda1 > Aborting journal on device sda1. > ext3_abort called. > EXT3-fs error (device sda1): ext3_journal_start_sb: Detected aborted > journal > Remounting filesystem read-only > sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > end_request: I/O error, dev sda, sector 5767247 > Buffer I/O error on device sda1, logical block 720898 > lost page write due to I/O error on sda1 > sd 0:0:1:0: [sda] Result: hostbyte=0x04 driverbyte=0x00 > end_request: I/O error, dev sda, sector 7140655