From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Kenneth Crudup <kenny@panix.com>
Cc: pavel@suse.cz, pm list <linux-pm@lists.linux-foundation.org>
Subject: Re: Software Suspend status in latest GIT?
Date: Wed, 6 Aug 2008 14:35:54 +0200 [thread overview]
Message-ID: <200808061435.55421.rjw@sisk.pl> (raw)
In-Reply-To: <Pine.LNX.4.64.0808051653440.7367@hp9800.localdomain>
On Wednesday, 6 of August 2008, Kenneth Crudup wrote:
>
> On Wed, 6 Aug 2008, Rafael J. Wysocki wrote:
>
> > They all are 64-bit. Except from this, they are quite different.
> > http://www.sisk.pl/kernel/debug/mainline/2.6.27-rc1-git6-dirty/M3A32-MVP-config
>
> Thanks for that.
>
> I'd made the only obvious change I could see differently (I'd specified a
> resume-to swap partition explicitly) but that had no effect.
>
> Essentially what happens is I begin the suspend (very generically, by
> writing "disk" to /sys/power/state), and it appears to start, but hangs
> up. I have my syslog also redirected to tty12, and if I switch over to
> that, I see:
>
> ----
> Aug 5 16:35:49 hp9800 kernel: [ 71.049504] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
> Aug 5 16:35:49 hp9800 kernel: [ 71.049508] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000
> Aug 5 16:35:49 hp9800 kernel: [ 71.054734] PM: Basic memory bitmaps created
> ---
>
> ... then it just hangs, no apparent disk activity. All of a sudden
> (~20 sec(?) later), a series of errors spit out from syslog, mostly related
> to trying to write to the disk, then I get a large number when it tries
> to remount/access my root (XFS) which fails due to I/O errors.
> Unfortunately these can't be saved and scrolling up the screen won't
> work (there's too much output anyway).
>
> One guess is that the suspend is stopping my hard drive (/dev/sda, SATA
> on the AHCI driver) and therefore nothing can continue. I wish I had
> more, but I'd have to find another box and see if that "serial console
> on USB" stuff actually works.
>
> So, based on *that* nearly-as-useless bug report, anything else I could
> try? This config works mostly w/o molestation on 2.6.26 generic (and with
> the TuxOnIce version, as well). I've attached both .config files, just
> in case.
Can you try with the patch from
http://bugzilla.kernel.org/show_bug.cgi?id=11178#c10
please?
Rafael
next parent reply other threads:[~2008-08-06 12:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.64.0808051552401.4955@hp9800.localdomain>
[not found] ` <200808060114.31881.rjw@sisk.pl>
[not found] ` <Pine.LNX.4.64.0808051653440.7367@hp9800.localdomain>
2008-08-06 12:35 ` Rafael J. Wysocki [this message]
2008-08-06 15:55 ` Software Suspend status in latest GIT? Kenneth Crudup
2008-08-06 16:04 ` Rafael J. Wysocki
2008-08-06 16:20 ` Kenneth Crudup
2008-08-07 0:21 ` Nigel Cunningham
2008-08-07 16:39 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200808061435.55421.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=kenny@panix.com \
--cc=linux-pm@lists.linux-foundation.org \
--cc=pavel@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox