From: Eric Sesterhenn <snakebyte@gmx.de>
To: linux-pm@lists.linux-foundation.org
Cc: vandrove@vc.cvut.cz
Subject: Suspend regression, hang after matroxfb
Date: Thu, 29 Jan 2009 13:58:55 +0100 [thread overview]
Message-ID: <20090129125855.GA4597@alice> (raw)
hi,
on this box standby worked with 2.6.28, but is broken with 2.6.29-rc3.
Dmesg of startup
http://www.cccmz.de/~snakebyte/200.log
.config
http://www.cccmz.de/~snakebyte/config_200
When testing the devices
root@computer-desktop:/sys/power# echo devices > pm_test
root@computer-desktop:/sys/power# echo standby > state
I get this message:
[ 174.177445] PM: Preparing system for standby sleep
[ 174.182706] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 174.186096] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 174.186903] PM: Entering standby sleep
[ 174.620476] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 174.621453] sd 2:0:0:0: [sda] Stopping disk
[ 174.743784] serial 00:08: disabled
[ 174.744389] matroxfb 0000:01:00.0: PCI INT A disabled
and the system does not seem to properly suspend / neither wakeup
root@computer-desktop:~# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0a.0 Ethernet controller: Intel Corporation 82556 EtherExpress PRO/100 Smart (rev 03)
00:0c.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:12.0 Multimedia audio controller: Rockwell International Device 4310
00:12.1 Communication controller: Rockwell International Riptide HSF 56k PCI Modem
00:12.2 Input device controller: Rockwell International Device 4312
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 03)
root@computer-desktop:~# lsmod
Module Size Used by
nfsd 217580 13
exportfs 4608 1 nfsd
nfs 253896 1
lockd 66984 2 nfsd,nfs
nfs_acl 3328 2 nfsd,nfs
auth_rpcgss 36160 2 nfsd,nfs
sunrpc 185716 16 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ipv6 252276 10
fuse 54188 1
unix 25404 96
root@computer-desktop:/usr/src/linux# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 697.840
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1395.68
clflush size : 32
power management:
After PM_VERBOSE enabled the log changes to this:
[ 1968.407273] PM: Syncing filesystems ... done.
[ 1968.424490] PM: Preparing system for standby sleep
[ 1968.431142] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 1968.434866] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 1968.435887] PM: Entering standby sleep
[ 1968.436580] agpgart-intel 0000:00:00.0: preparing suspend
[ 1968.436683] pci 0000:00:01.0: preparing suspend
[ 1968.436788] pci 0000:00:07.0: preparing suspend
[ 1968.436877] ata_piix 0000:00:07.1: preparing suspend
[ 1968.436998] uhci_hcd 0000:00:07.2: preparing suspend
[ 1968.437091] piix4_smbus 0000:00:07.3: preparing suspend
[ 1968.437213] pci 0000:00:0a.0: preparing suspend
[ 1968.437301] aic7xxx 0000:00:0c.0: preparing suspend
[ 1968.437420] 8139too 0000:00:0e.0: preparing suspend
[ 1968.437511] RIPTIDE 0000:00:12.0: preparing suspend
[ 1968.437617] pci 0000:00:12.1: preparing suspend
[ 1968.437705] pci 0000:00:12.2: preparing suspend
[ 1968.437807] matroxfb 0000:01:00.0: preparing suspend
[ 1968.438056] platform pcspkr: preparing suspend
[ 1968.438166] platform microcode: preparing suspend
[ 1968.438321] vga16fb vga16fb.0: preparing suspend
[ 1968.442065] serial8250 serial8250: preparing suspend
[ 1968.442857] usb usb1: preparing type suspend, may wakeup
[ 1968.442995] i8042 i8042: preparing suspend
[ 1968.443144] rtc-test rtc-test.0: preparing suspend
[ 1968.443256] rtc-test rtc-test.1: preparing suspend
[ 1968.443785] ac97 0-0:unknown codec: legacy suspend
[ 1968.443960] fschmd 3-0073: legacy suspend
[ 1968.444151] rtc rtc2: legacy class suspend
[ 1968.444252] rtc-test rtc-test.1: suspend
[ 1968.444351] rtc rtc1: legacy class suspend
[ 1968.444501] rtc-test rtc-test.0: suspend
[ 1968.444638] rtc rtc0: legacy class suspend
[ 1968.444883] atkbd serio0: legacy suspend
[ 1968.872096] i8042 i8042: suspend
[ 1968.872384] usb usb1: type suspend, may wakeup
[ 1968.872581] sd 2:0:0:0: legacy suspend
[ 1968.872881] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 1968.873883] sd 2:0:0:0: [sda] Stopping disk
[ 1968.992131] scsi 1:0:0:0: legacy suspend
[ 1968.992852] serial8250 serial8250: suspend
[ 1968.992997] drm card0: legacy class suspend
[ 1968.996728] vga16fb vga16fb.0: suspend
[ 1968.996920] platform microcode: suspend
[ 1968.997059] platform pcspkr: suspend
[ 1968.997256] serial 00:08: legacy suspend
[ 1968.998043] serial 00:08: disabled
[ 1968.998213] pnp 00:07: legacy suspend
[ 1968.998343] i8042 kbd 00:06: legacy suspend
[ 1968.998498] pnp 00:05: legacy suspend
[ 1968.998626] pnp 00:04: legacy suspend
[ 1968.998754] rtc_cmos 00:03: legacy suspend, may wakeup
[ 1968.998980] pnp 00:02: legacy suspend
[ 1968.999109] system 00:01: legacy suspend
[ 1968.999262] pnp 00:00: legacy suspend
[ 1968.999410] matroxfb 0000:01:00.0: suspend
[ 1968.999737] matroxfb 0000:01:00.0: PCI INT A disabled
I am not sure if a bisection makes sense
with all those suspend bugs.
Greetings Eric
next reply other threads:[~2009-01-29 12:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-29 12:58 Eric Sesterhenn [this message]
2009-01-29 22:12 ` Suspend regression, hang after matroxfb Rafael J. Wysocki
[not found] ` <200901292312.44884.rjw@sisk.pl>
2009-01-30 12:46 ` Eric Sesterhenn
[not found] ` <20090130124643.GA8394@alice>
2009-01-30 21:15 ` Rafael J. Wysocki
[not found] ` <200901302215.28057.rjw@sisk.pl>
2009-01-30 22:03 ` Rafael J. Wysocki
2009-01-30 22:06 ` Eric Sesterhenn
[not found] ` <200901302303.23143.rjw@sisk.pl>
2009-01-30 22:09 ` Eric Sesterhenn
[not found] ` <20090130220640.GB13207@alice>
2009-01-30 22:27 ` Rafael J. Wysocki
[not found] ` <200901302327.50887.rjw@sisk.pl>
2009-01-30 22:31 ` Eric Sesterhenn
[not found] ` <20090130223144.GD13207@alice>
2009-01-30 22:59 ` Rafael J. Wysocki
[not found] ` <200901302359.18309.rjw@sisk.pl>
2009-01-30 23:21 ` Alan Stern
2009-01-30 23:36 ` Eric Sesterhenn
[not found] <Pine.LNX.4.44L0.0901301818400.2785-100000@iolanthe.rowland.org>
2009-01-30 23:40 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090129125855.GA4597@alice \
--to=snakebyte@gmx.de \
--cc=linux-pm@lists.linux-foundation.org \
--cc=vandrove@vc.cvut.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox