* [PATCH] suspend: add initcall_debug style timing for suspend/resume
@ 2009-12-06 20:35 Arjan van de Ven
0 siblings, 0 replies; 5+ messages in thread
From: Arjan van de Ven @ 2009-12-06 20:35 UTC (permalink / raw)
To: Linus Torvalds; +Cc: ACPI Devel Maling List, pm list, LKML
>From fcd52b97aa02f19baa570e4a62dfdfab0faed976 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Sun, 6 Dec 2009 12:32:28 -0800
Subject: [PATCH] suspend: add initcall_debug style timing for suspend/resume
In order to diagnose overall suspend/resume times, we need
basic instrumentation to break down the total time into per
device timing, similar to initcall_debug.
This patch adds the basic timing instrumentation, needed
for a scritps/bootgraph.pl equivalent or humans.
The bootgraph.pl program is still a work in progress, but
is far enough along to know that this patch is sufficient.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
---
drivers/base/power/main.c | 29 +++++++++++++++++++++++++++++
include/linux/init.h | 2 ++
2 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 8aa2443..2ad345c 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -25,6 +25,7 @@
#include <linux/resume-trace.h>
#include <linux/rwsem.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include "../base.h"
#include "power.h"
@@ -172,6 +173,12 @@ static int pm_op(struct device *dev,
pm_message_t state)
{
int error = 0;
+ ktime_t calltime, delta, rettime;
+
+ if (initcall_debug) {
+ printk("calling %s+ @ %i\n", dev_name(dev), task_pid_nr(current));
+ calltime = ktime_get();
+ }
switch (state.event) {
#ifdef CONFIG_SUSPEND
@@ -219,6 +226,14 @@ static int pm_op(struct device *dev,
default:
error = -EINVAL;
}
+
+ if (initcall_debug) {
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ printk("initcall %s+ returned %d after %Ld usecs\n", dev_name(dev),
+ error, (unsigned long long) ktime_to_ns(delta) >> 10);
+ }
+
return error;
}
@@ -236,6 +251,12 @@ static int pm_noirq_op(struct device *dev,
pm_message_t state)
{
int error = 0;
+ ktime_t calltime, delta, rettime;
+
+ if (initcall_debug) {
+ printk("calling %s_i+ @ %i\n", dev_name(dev), task_pid_nr(current));
+ calltime = ktime_get();
+ }
switch (state.event) {
#ifdef CONFIG_SUSPEND
@@ -283,6 +304,14 @@ static int pm_noirq_op(struct device *dev,
default:
error = -EINVAL;
}
+
+ if (initcall_debug) {
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ printk("initcall %s_i+ returned %d after %Ld usecs\n", dev_name(dev),
+ error, (unsigned long long) ktime_to_ns(delta) >> 10);
+ }
+
return error;
}
diff --git a/include/linux/init.h b/include/linux/init.h
index ff8bde5..ab1d31f 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -149,6 +149,8 @@ void prepare_namespace(void);
extern void (*late_time_init)(void);
+extern int initcall_debug;
+
#endif
#ifndef MODULE
--
1.6.2.5
--
Arjan van de Ven Intel Open Source Technology Centre
For development, discussion and tips for power savings,
visit http://www.lesswatts.org
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] suspend: add initcall_debug style timing for suspend/resume
[not found] <20091206123552.7be316b2@infradead.org>
@ 2009-12-12 18:27 ` Rafael J. Wysocki
2009-12-12 18:29 ` Rafael J. Wysocki
2009-12-12 21:47 ` Arjan van de Ven
0 siblings, 2 replies; 5+ messages in thread
From: Rafael J. Wysocki @ 2009-12-12 18:27 UTC (permalink / raw)
To: Arjan van de Ven; +Cc: ACPI Devel Maling List, pm list, Linus Torvalds, LKML
On Sunday 06 December 2009, Arjan van de Ven wrote:
>
> From fcd52b97aa02f19baa570e4a62dfdfab0faed976 Mon Sep 17 00:00:00 2001
> From: Arjan van de Ven <arjan@linux.intel.com>
> Date: Sun, 6 Dec 2009 12:32:28 -0800
> Subject: [PATCH] suspend: add initcall_debug style timing for suspend/resume
>
> In order to diagnose overall suspend/resume times, we need
> basic instrumentation to break down the total time into per
> device timing, similar to initcall_debug.
>
> This patch adds the basic timing instrumentation, needed
> for a scritps/bootgraph.pl equivalent or humans.
> The bootgraph.pl program is still a work in progress, but
> is far enough along to know that this patch is sufficient.
>
> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
> ---
> drivers/base/power/main.c | 29 +++++++++++++++++++++++++++++
> include/linux/init.h | 2 ++
> 2 files changed, 31 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
> index 8aa2443..2ad345c 100644
> --- a/drivers/base/power/main.c
> +++ b/drivers/base/power/main.c
> @@ -25,6 +25,7 @@
> #include <linux/resume-trace.h>
> #include <linux/rwsem.h>
> #include <linux/interrupt.h>
> +#include <linux/sched.h>
>
> #include "../base.h"
> #include "power.h"
> @@ -172,6 +173,12 @@ static int pm_op(struct device *dev,
> pm_message_t state)
> {
> int error = 0;
> + ktime_t calltime, delta, rettime;
> +
> + if (initcall_debug) {
> + printk("calling %s+ @ %i\n", dev_name(dev), task_pid_nr(current));
> + calltime = ktime_get();
> + }
>
> switch (state.event) {
> #ifdef CONFIG_SUSPEND
> @@ -219,6 +226,14 @@ static int pm_op(struct device *dev,
> default:
> error = -EINVAL;
> }
> +
> + if (initcall_debug) {
> + rettime = ktime_get();
> + delta = ktime_sub(rettime, calltime);
> + printk("initcall %s+ returned %d after %Ld usecs\n", dev_name(dev),
> + error, (unsigned long long) ktime_to_ns(delta) >> 10);
I've changed that "initcall" to "call". Hopefully that won't break your scripts. ;-)
Rafael
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] suspend: add initcall_debug style timing for suspend/resume
2009-12-12 18:27 ` [PATCH] suspend: add initcall_debug style timing for suspend/resume Rafael J. Wysocki
@ 2009-12-12 18:29 ` Rafael J. Wysocki
2009-12-12 18:31 ` Rafael J. Wysocki
2009-12-12 21:47 ` Arjan van de Ven
1 sibling, 1 reply; 5+ messages in thread
From: Rafael J. Wysocki @ 2009-12-12 18:29 UTC (permalink / raw)
To: Arjan van de Ven; +Cc: ACPI Devel Maling List, pm list, Linus Torvalds, LKML
On Saturday 12 December 2009, Rafael J. Wysocki wrote:
> On Sunday 06 December 2009, Arjan van de Ven wrote:
> >
> > From fcd52b97aa02f19baa570e4a62dfdfab0faed976 Mon Sep 17 00:00:00 2001
> > From: Arjan van de Ven <arjan@linux.intel.com>
> > Date: Sun, 6 Dec 2009 12:32:28 -0800
> > Subject: [PATCH] suspend: add initcall_debug style timing for suspend/resume
> >
> > In order to diagnose overall suspend/resume times, we need
> > basic instrumentation to break down the total time into per
> > device timing, similar to initcall_debug.
> >
> > This patch adds the basic timing instrumentation, needed
> > for a scritps/bootgraph.pl equivalent or humans.
> > The bootgraph.pl program is still a work in progress, but
> > is far enough along to know that this patch is sufficient.
> >
> > Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
> > ---
> > drivers/base/power/main.c | 29 +++++++++++++++++++++++++++++
> > include/linux/init.h | 2 ++
> > 2 files changed, 31 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
> > index 8aa2443..2ad345c 100644
> > --- a/drivers/base/power/main.c
> > +++ b/drivers/base/power/main.c
> > @@ -25,6 +25,7 @@
> > #include <linux/resume-trace.h>
> > #include <linux/rwsem.h>
> > #include <linux/interrupt.h>
> > +#include <linux/sched.h>
> >
> > #include "../base.h"
> > #include "power.h"
> > @@ -172,6 +173,12 @@ static int pm_op(struct device *dev,
> > pm_message_t state)
> > {
> > int error = 0;
> > + ktime_t calltime, delta, rettime;
> > +
> > + if (initcall_debug) {
> > + printk("calling %s+ @ %i\n", dev_name(dev), task_pid_nr(current));
> > + calltime = ktime_get();
> > + }
> >
> > switch (state.event) {
> > #ifdef CONFIG_SUSPEND
> > @@ -219,6 +226,14 @@ static int pm_op(struct device *dev,
> > default:
> > error = -EINVAL;
> > }
> > +
> > + if (initcall_debug) {
> > + rettime = ktime_get();
> > + delta = ktime_sub(rettime, calltime);
> > + printk("initcall %s+ returned %d after %Ld usecs\n", dev_name(dev),
> > + error, (unsigned long long) ktime_to_ns(delta) >> 10);
>
> I've changed that "initcall" to "call". Hopefully that won't break your scripts. ;-)
In addition to that I've changed printk to pr_infor everywhere in the patch,
is that fine with you?
Rafael
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] suspend: add initcall_debug style timing for suspend/resume
2009-12-12 18:29 ` Rafael J. Wysocki
@ 2009-12-12 18:31 ` Rafael J. Wysocki
0 siblings, 0 replies; 5+ messages in thread
From: Rafael J. Wysocki @ 2009-12-12 18:31 UTC (permalink / raw)
To: Arjan van de Ven; +Cc: ACPI Devel Maling List, pm list, Linus Torvalds, LKML
On Saturday 12 December 2009, Rafael J. Wysocki wrote:
> On Saturday 12 December 2009, Rafael J. Wysocki wrote:
> > On Sunday 06 December 2009, Arjan van de Ven wrote:
> > >
> > > From fcd52b97aa02f19baa570e4a62dfdfab0faed976 Mon Sep 17 00:00:00 2001
> > > From: Arjan van de Ven <arjan@linux.intel.com>
> > > Date: Sun, 6 Dec 2009 12:32:28 -0800
> > > Subject: [PATCH] suspend: add initcall_debug style timing for suspend/resume
> > >
> > > In order to diagnose overall suspend/resume times, we need
> > > basic instrumentation to break down the total time into per
> > > device timing, similar to initcall_debug.
> > >
> > > This patch adds the basic timing instrumentation, needed
> > > for a scritps/bootgraph.pl equivalent or humans.
> > > The bootgraph.pl program is still a work in progress, but
> > > is far enough along to know that this patch is sufficient.
> > >
> > > Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
> > > ---
> > > drivers/base/power/main.c | 29 +++++++++++++++++++++++++++++
> > > include/linux/init.h | 2 ++
> > > 2 files changed, 31 insertions(+), 0 deletions(-)
> > >
> > > diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
> > > index 8aa2443..2ad345c 100644
> > > --- a/drivers/base/power/main.c
> > > +++ b/drivers/base/power/main.c
> > > @@ -25,6 +25,7 @@
> > > #include <linux/resume-trace.h>
> > > #include <linux/rwsem.h>
> > > #include <linux/interrupt.h>
> > > +#include <linux/sched.h>
> > >
> > > #include "../base.h"
> > > #include "power.h"
> > > @@ -172,6 +173,12 @@ static int pm_op(struct device *dev,
> > > pm_message_t state)
> > > {
> > > int error = 0;
> > > + ktime_t calltime, delta, rettime;
> > > +
> > > + if (initcall_debug) {
> > > + printk("calling %s+ @ %i\n", dev_name(dev), task_pid_nr(current));
> > > + calltime = ktime_get();
> > > + }
> > >
> > > switch (state.event) {
> > > #ifdef CONFIG_SUSPEND
> > > @@ -219,6 +226,14 @@ static int pm_op(struct device *dev,
> > > default:
> > > error = -EINVAL;
> > > }
> > > +
> > > + if (initcall_debug) {
> > > + rettime = ktime_get();
> > > + delta = ktime_sub(rettime, calltime);
> > > + printk("initcall %s+ returned %d after %Ld usecs\n", dev_name(dev),
> > > + error, (unsigned long long) ktime_to_ns(delta) >> 10);
> >
> > I've changed that "initcall" to "call". Hopefully that won't break your scripts. ;-)
>
> In addition to that I've changed printk to pr_infor
Argh. pr_info, that is.
Rafael
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] suspend: add initcall_debug style timing for suspend/resume
2009-12-12 18:27 ` [PATCH] suspend: add initcall_debug style timing for suspend/resume Rafael J. Wysocki
2009-12-12 18:29 ` Rafael J. Wysocki
@ 2009-12-12 21:47 ` Arjan van de Ven
1 sibling, 0 replies; 5+ messages in thread
From: Arjan van de Ven @ 2009-12-12 21:47 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: ACPI Devel Maling List, pm list, Linus Torvalds, LKML
On Sat, 12 Dec 2009 19:27:55 +0100
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> I've changed that "initcall" to "call". Hopefully that won't break
> your scripts. ;-)
it will, but I can adjust them no big deal
--
Arjan van de Ven Intel Open Source Technology Centre
For development, discussion and tips for power savings,
visit http://www.lesswatts.org
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2009-12-12 21:47 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20091206123552.7be316b2@infradead.org>
2009-12-12 18:27 ` [PATCH] suspend: add initcall_debug style timing for suspend/resume Rafael J. Wysocki
2009-12-12 18:29 ` Rafael J. Wysocki
2009-12-12 18:31 ` Rafael J. Wysocki
2009-12-12 21:47 ` Arjan van de Ven
2009-12-06 20:35 Arjan van de Ven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox