From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: linux-pm@lists.linux-foundation.org
Cc: Magnus Damm <damm@igel.co.jp>
Subject: Re: runtime PM: common hooks for static and runtime PM
Date: Wed, 17 Mar 2010 22:46:32 +0100 [thread overview]
Message-ID: <201003172246.32443.rjw@sisk.pl> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1003171305410.1734-100000@iolanthe.rowland.org>
On Wednesday 17 March 2010, Alan Stern wrote:
> On Wed, 17 Mar 2010, Kevin Hilman wrote:
>
> > >> In my case, the driver's runtime_suspend and runtime_resume hooks are
> > >> not where the clocks are managed. The actual hardware enable/disable
> > >> is done in the bus-level runtime PM hooks, in this case platform_bus.
> > >> So having the system PM methods directly call the drivers runtime PM
> > >> methods doesn't help. In fact, because we handle the hardware at the
> > >> bus level, most drivers can live without any runtime PM methods, and
> > >> simply use get/put.
> > >>
> > >> I've worked around this temporarily by calling the
> > >> bus->pm->runtime_suspend() and ->runtime_resume() methods from the
> > >> system PM methods, but am curious if that is an acceptable solution.
> > >
> > > If the platform bus manages the clocks from within its runtime-PM
> > > routines, then it ought to provide a similar service from within its
> > > system-PM routines.
> >
> > Hmm, good point. Currently the platform bus code allows overriding
> > the runtime PM methods via weak functions (drivers/base/platform.c)
> > but not the system PM methods. Below is a patch that allows platforms
> > to extend the system PM methods of the platform bus as well.
> >
> > > You could do it by calling the bus's runtime-PM
> > > routines indirectly through the method pointers (as you do now), or by
> > > calling the runtime-PM routines directly, or by making the runtime-PM
> > > routines and the system-PM routines both call a separate common
> > > function responsible for managing the clocks.
> >
> > Using the patch below, I am able to add custom system PM hooks and then
> > use common code to manage the clocks for runtime PM and system PM.
> >
> > Comments?
> >
> > Kevin
> >
> >
> > commit ca2173923bae3ba631e12698401ef0b59ec0433c
> > Author: Kevin Hilman <khilman@deeprootsystems.com>
> > Date: Wed Mar 17 09:36:10 2010 -0700
> >
> > platform_bus: allow custom extensions to system PM methods
> >
> > When runtime PM for platform_bus was added, it allowed for platforms
> > to customize the runtime PM methods since they are defined as weak
> > symbols.
> >
> > This patch allows platforms to extend the system PM methods with
> > custom hooks as well so runtime PM and system PM extensions can be
> > managed together.
> >
> > Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
> >
> > diff --git a/drivers/base/platform.c b/drivers/base/platform.c
> > index 1ba9d61..a30f850 100644
> > --- a/drivers/base/platform.c
> > +++ b/drivers/base/platform.c
> > @@ -729,6 +729,26 @@ static void platform_pm_complete(struct device *dev)
> >
> > #ifdef CONFIG_SUSPEND
>
> This probably should be CONFIG_SLEEP.
CONFIG_PM_SLEEP to be precise.
> > +int __weak platform_pm_suspend_hook(struct device *dev)
> > +{
> > + return 0;
> > +}
> > +
> > +int __weak platform_pm_suspend_noirq_hook(struct device *dev)
> > +{
> > + return 0;
> > +}
> > +
> > +int __weak platform_pm_resume_hook(struct device *dev)
> > +{
> > + return 0;
> > +}
> > +
> > +int __weak platform_pm_resume_noirq_hook(struct device *dev)
> > +{
> > + return 0;
> > +}
> > +
> > static int platform_pm_suspend(struct device *dev)
> > {
> > struct device_driver *drv = dev->driver;
> > @@ -744,6 +764,8 @@ static int platform_pm_suspend(struct device *dev)
> > ret = platform_legacy_suspend(dev, PMSG_SUSPEND);
> > }
> >
> > + platform_pm_suspend_hook(dev);
> > +
> > return ret;
> > }
> >
> > @@ -760,6 +782,8 @@ static int platform_pm_suspend_noirq(struct device *dev)
> > ret = drv->pm->suspend_noirq(dev);
> > }
> >
> > + platform_pm_suspend_noirq_hook(dev);
> > +
> > return ret;
> > }
> >
> > @@ -768,6 +792,8 @@ static int platform_pm_resume(struct device *dev)
> > struct device_driver *drv = dev->driver;
> > int ret = 0;
> >
> > + platform_pm_resume_hook(dev);
> > +
> > if (!drv)
> > return 0;
> >
> > @@ -786,6 +812,8 @@ static int platform_pm_resume_noirq(struct device *dev)
> > struct device_driver *drv = dev->driver;
> > int ret = 0;
> >
> > + platform_pm_resume_noirq_hook(dev);
> > +
> > if (!drv)
> > return 0;
> >
>
> It looks reasonable to me, but I'm not actively involved in PM for the
> platform bus. Magnus Damm might have some suggestions.
Yes, I think Magnus is the right person to ask for comments.
Rafael
next prev parent reply other threads:[~2010-03-17 21:46 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-03 23:30 runtime PM: common hooks for static and runtime PM Kevin Hilman
2010-02-04 15:24 ` Alan Stern
2010-02-05 10:43 ` Mark Brown
2010-02-05 15:41 ` Alan Stern
2010-02-05 16:11 ` Mark Brown
2010-02-05 21:40 ` Alan Stern
2010-02-05 22:44 ` Mark Brown
2010-02-06 2:57 ` Alan Stern
2010-02-06 15:46 ` Mark Brown
2010-02-06 16:18 ` Alan Stern
2010-02-08 14:54 ` Alan Stern
2010-02-24 18:14 ` Mark Brown
2010-02-24 18:56 ` Alan Stern
2010-02-24 22:32 ` Mark Brown
2010-02-25 15:26 ` Kevin Hilman
2010-03-16 21:31 ` Kevin Hilman
2010-03-17 14:47 ` Alan Stern
2010-03-17 16:42 ` Kevin Hilman
2010-03-17 17:10 ` Alan Stern
2010-03-17 21:46 ` Rafael J. Wysocki [this message]
2010-03-17 22:32 ` Kevin Hilman
2010-03-18 14:13 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201003172246.32443.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=damm@igel.co.jp \
--cc=linux-pm@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox