linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Chuanxiao Dong <chuanxiao.dong@intel.com>
To: linux-mmc@vger.kernel.org, linux-pm@lists.linux-foundation.org
Cc: rjw@sisk.pl
Subject: [PATCH V2]mmc: remove MMC bus legacy suspend/resume method
Date: Thu, 5 Apr 2012 15:51:18 +0800	[thread overview]
Message-ID: <20120405075118.GA29395@intel.com> (raw)

MMC bus is using legacy suspend/resume method, which is not compatible if
runtime pm callbacks are used. In this scenario, MMC bus suspend/resume
callbacks cannot be called when system entering S3. So change to use the new
defined dev_pm_ops for system sleeping mode

Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
---
Changes in v2:
	use SET_SYSTEM_SLEEP_PM_OPS to define sleep callbacks as Rafael
	suggested

 drivers/mmc/card/block.c |    2 +-
 drivers/mmc/core/bus.c   |   26 ++++++++++++--------------
 include/linux/mmc/card.h |    2 +-
 3 files changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index f2020d3..3582c03 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1826,7 +1826,7 @@ static void mmc_blk_remove(struct mmc_card *card)
 }
 
 #ifdef CONFIG_PM
-static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state)
+static int mmc_blk_suspend(struct mmc_card *card)
 {
 	struct mmc_blk_data *part_md;
 	struct mmc_blk_data *md = mmc_get_drvdata(card);
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 5d011a3..d44f0d9 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -122,14 +122,14 @@ static int mmc_bus_remove(struct device *dev)
 	return 0;
 }
 
-static int mmc_bus_suspend(struct device *dev, pm_message_t state)
+static int mmc_bus_suspend(struct device *dev)
 {
 	struct mmc_driver *drv = to_mmc_driver(dev->driver);
 	struct mmc_card *card = mmc_dev_to_card(dev);
 	int ret = 0;
 
 	if (dev->driver && drv->suspend)
-		ret = drv->suspend(card, state);
+		ret = drv->suspend(card);
 	return ret;
 }
 
@@ -165,20 +165,20 @@ static int mmc_runtime_idle(struct device *dev)
 	return pm_runtime_suspend(dev);
 }
 
-static const struct dev_pm_ops mmc_bus_pm_ops = {
-	.runtime_suspend	= mmc_runtime_suspend,
-	.runtime_resume		= mmc_runtime_resume,
-	.runtime_idle		= mmc_runtime_idle,
-};
-
-#define MMC_PM_OPS_PTR	(&mmc_bus_pm_ops)
-
 #else /* !CONFIG_PM_RUNTIME */
 
-#define MMC_PM_OPS_PTR	NULL
+#define mmc_runtime_suspend	NULL
+#define mmc_runtime_resume	NULL
+#define mmc_runtime_idle	NULL
 
 #endif /* !CONFIG_PM_RUNTIME */
 
+static const struct dev_pm_ops mmc_bus_pm_ops = {
+	SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume,
+			mmc_runtime_idle)
+	SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume)
+};
+
 static struct bus_type mmc_bus_type = {
 	.name		= "mmc",
 	.dev_attrs	= mmc_dev_attrs,
@@ -186,9 +186,7 @@ static struct bus_type mmc_bus_type = {
 	.uevent		= mmc_bus_uevent,
 	.probe		= mmc_bus_probe,
 	.remove		= mmc_bus_remove,
-	.suspend	= mmc_bus_suspend,
-	.resume		= mmc_bus_resume,
-	.pm		= MMC_PM_OPS_PTR,
+	.pm		= &mmc_bus_pm_ops,
 };
 
 int mmc_register_bus(void)
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 1a1ca71..c984c9a 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -480,7 +480,7 @@ struct mmc_driver {
 	struct device_driver drv;
 	int (*probe)(struct mmc_card *);
 	void (*remove)(struct mmc_card *);
-	int (*suspend)(struct mmc_card *, pm_message_t);
+	int (*suspend)(struct mmc_card *);
 	int (*resume)(struct mmc_card *);
 };
 
-- 
1.7.1


             reply	other threads:[~2012-04-05  7:51 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-05  7:51 Chuanxiao Dong [this message]
2012-04-09  5:22 ` [PATCH V2]mmc: remove MMC bus legacy suspend/resume method Hebbar, Gururaja
2012-04-09 21:07 ` Linus Walleij
2012-04-10 13:19 ` Ulf Hansson
2012-04-10 14:02   ` Dong, Chuanxiao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120405075118.GA29395@intel.com \
    --to=chuanxiao.dong@intel.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-pm@lists.linux-foundation.org \
    --cc=rjw@sisk.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).