From: Mike Turquette <mturquette@ti.com>
To: "Cousson, Benoit" <b-cousson@ti.com>
Cc: eduardo.valentin@ti.com, kishon@ti.com, kbaidarov@dev.rtsoft.ru,
santosh.shilimkar@ti.com, tony@atomide.com, paul@pwsan.com,
balbi@ti.com, amit.kucheria@linaro.org,
linux-pm@lists.linux-foundation.org,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
amit.kachhap@linaro.org, Keerthy <j-keerthy@ti.com>
Subject: Re: [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor
Date: Tue, 29 May 2012 10:51:25 -0700 [thread overview]
Message-ID: <20120529175125.GD2722@gmail.com> (raw)
In-Reply-To: <4FC4CBC8.2040600@ti.com>
On 20120529-15:14, Cousson, Benoit wrote:
> On 5/28/2012 1:16 PM, Eduardo Valentin wrote:
> >In fact I didn't touch the clk data on purpose and left the clock handling
> >as is. On my side I didn't know how the clock struct would look like with DT,
> >so, I didn't mess with it.
> >
> >Do you have a reference to check the work in progress for clock DT ?
>
> Rob sent a pull request, it seems that now it is up to Mike T. :-)
>
> http://lists-archives.com/linux-kernel/27640907-dt-clk-binding-support.html
>
Due to the on-going discussion around those patches I haven't pulled
yet. If everyone agrees once the dust settles then I'll take them in.
Regards,
Mike
next prev parent reply other threads:[~2012-05-29 17:51 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-25 8:25 [RFC PATCH 00/11] OMAP System Control Module Eduardo Valentin
2012-05-25 8:25 ` [RFC PATCH 01/11] ARM: OMAP4: Remove un-used control module headers and defines Eduardo Valentin
2012-05-28 9:12 ` Shilimkar, Santosh
2012-05-25 8:25 ` [RFC PATCH 02/11] ARM: OMAP: expose control.h to mach area Eduardo Valentin
2012-05-28 9:25 ` Shilimkar, Santosh
2012-05-28 10:30 ` Valentin, Eduardo
2012-06-01 11:19 ` Tony Lindgren
2012-05-25 8:25 ` [RFC PATCH 03/11] arm: omap: device: create a device for system control module Eduardo Valentin
2012-05-25 12:30 ` Cousson, Benoit
2012-05-29 9:44 ` Eduardo Valentin
2012-06-14 13:50 ` Konstantin Baydarov
2012-06-15 9:22 ` Valentin, Eduardo
2012-05-29 13:39 ` Konstantin Baydarov
2012-05-25 8:25 ` [RFC PATCH 04/11] OMAP: Add early " Eduardo Valentin
2012-05-25 11:32 ` Konstantin Baydarov
2012-05-25 11:44 ` Valentin, Eduardo
2012-05-25 11:54 ` Konstantin Baydarov
2012-05-25 12:32 ` Cousson, Benoit
2012-05-28 9:58 ` Shilimkar, Santosh
2012-05-25 8:25 ` [RFC PATCH 05/11] mfd: omap: control: core system control driver Eduardo Valentin
2012-05-25 12:52 ` Cousson, Benoit
2012-05-28 11:35 ` Eduardo Valentin
2012-05-29 13:25 ` Cousson, Benoit
2012-06-01 11:29 ` Tony Lindgren
2012-06-01 12:30 ` Shilimkar, Santosh
2012-06-01 12:43 ` Cousson, Benoit
2012-06-01 17:19 ` Eduardo Valentin
2012-06-01 13:40 ` Konstantin Baydarov
2012-06-01 14:13 ` Tony Lindgren
2012-06-01 14:26 ` Konstantin Baydarov
2012-05-28 9:54 ` Shilimkar, Santosh
2012-05-28 11:42 ` Eduardo Valentin
2012-05-28 13:15 ` Shilimkar, Santosh
2012-05-29 13:31 ` Cousson, Benoit
2012-05-25 8:25 ` [RFC PATCH 06/11] OMAP2+: use control module mfd driver in omap_type Eduardo Valentin
2012-05-25 12:53 ` Cousson, Benoit
2012-05-28 10:02 ` Shilimkar, Santosh
2012-05-28 11:24 ` Eduardo Valentin
2012-06-01 11:35 ` Tony Lindgren
2012-05-25 8:25 ` [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver Eduardo Valentin
2012-05-25 13:35 ` Shubhrajyoti Datta
2012-05-25 15:06 ` Cousson, Benoit
2012-06-01 11:38 ` Tony Lindgren
2012-06-01 13:20 ` [linux-pm] " Tony Lindgren
2012-06-01 14:07 ` Kevin Hilman
2012-06-01 14:15 ` Tony Lindgren
2012-05-25 8:25 ` [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields Eduardo Valentin
2012-05-25 15:13 ` Cousson, Benoit
2012-05-28 11:17 ` Eduardo Valentin
2012-05-28 10:04 ` Shilimkar, Santosh
2012-05-28 11:18 ` Eduardo Valentin
2012-05-25 8:25 ` [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor Eduardo Valentin
2012-05-25 15:49 ` Cousson, Benoit
2012-05-28 11:06 ` Eduardo Valentin
2012-05-28 11:16 ` Eduardo Valentin
2012-05-29 13:14 ` Cousson, Benoit
2012-05-29 17:51 ` Mike Turquette [this message]
2012-05-25 16:39 ` Konstantin Baydarov
2012-05-28 10:55 ` Eduardo Valentin
2012-06-01 11:42 ` Tony Lindgren
2012-05-25 8:26 ` [RFC PATCH 10/11] omap4: thermal: add basic CPU thermal zone Eduardo Valentin
2012-05-28 9:33 ` Shilimkar, Santosh
2012-05-28 9:48 ` Felipe Balbi
2012-05-28 10:26 ` Valentin, Eduardo
2012-05-29 12:54 ` Cousson, Benoit
2012-05-25 8:26 ` [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4 Eduardo Valentin
2012-05-29 9:49 ` Konstantin Baydarov
2012-05-30 8:38 ` Cousson, Benoit
2012-05-30 9:05 ` Konstantin Baydarov
2012-05-30 9:26 ` Cousson, Benoit
2012-05-30 10:17 ` Konstantin Baydarov
2012-05-30 10:22 ` Cousson, Benoit
2012-05-30 10:42 ` Eduardo Valentin
2012-05-30 12:16 ` Cousson, Benoit
2012-05-31 12:06 ` Konstantin Baydarov
2012-05-31 12:49 ` Eduardo Valentin
2012-05-31 12:52 ` Cousson, Benoit
2012-05-31 14:51 ` Konstantin Baydarov
2012-05-25 8:35 ` [RFC PATCH 00/11] OMAP System Control Module Eduardo Valentin
2012-05-25 10:50 ` Konstantin Baydarov
2012-05-25 11:11 ` Valentin, Eduardo
2012-05-25 12:21 ` Konstantin Baydarov
2012-06-01 0:12 ` [linux-pm] " Kevin Hilman
2012-06-18 11:32 ` [RFC PATCH v2 01/11] ARM: OMAP4: Remove un-used control module headers and defines Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 02/11] ARM: OMAP: expose control.h to mach area Konstantin Baydarov
2012-06-20 10:17 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 03/11] mfd: omap: control: core system control driver Konstantin Baydarov
2012-06-20 10:22 ` Tony Lindgren
2012-06-20 14:13 ` Konstantin Baydarov
2012-06-26 11:17 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 04/11] OMAP2+: use control module mfd driver in omap_type Konstantin Baydarov
2012-06-20 10:24 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 05/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 06/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields Konstantin Baydarov
2012-06-20 10:25 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 07/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 08/11] omap4: thermal: add basic CPU thermal zone Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 09/11] ARM: DT: Add support to system control module for OMAP4 Konstantin Baydarov
2012-06-18 12:13 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120529175125.GD2722@gmail.com \
--to=mturquette@ti.com \
--cc=amit.kachhap@linaro.org \
--cc=amit.kucheria@linaro.org \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=eduardo.valentin@ti.com \
--cc=j-keerthy@ti.com \
--cc=kbaidarov@dev.rtsoft.ru \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=paul@pwsan.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).