linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: Mark Einon <mark.einon@gmail.com>
Cc: Peter Hurley <peter@hurleysoftware.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	linux1394-devel@lists.sourceforge.net,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH] firewire: Fix ohci free_irq() warning
Date: Sat, 2 Feb 2013 16:01:03 +0100	[thread overview]
Message-ID: <20130202160103.0ce1fc43@stein> (raw)
In-Reply-To: <CANK3SE2nsxLMUyANzsov4d86ow4v9NuzaZsS3XvjpQJOfYXYUQ@mail.gmail.com>

On Feb 01 Mark Einon wrote:
> On 1 February 2013 21:09, Peter Hurley <peter@hurleysoftware.com> wrote:
> >>>> On Jan 29 Alan Stern wrote:
> >>>>> Why does the pci_suspend routine call free_irq() at all?  As far as I 
> >>>>> know, it's not supposed to do that.  Won't the device continue to use 
> >>>>> the same IRQ after it is resumed?

As far as I can tell, it happened to be done that way as a side effect of
how the probe() and resume() methods share code.  It has remained like
this since the initial implementation:
http://git.kernel.org/linus/2aef469a35a2

Still, at this point I would like to learn whether .suspend() followed
by .remove() is a valid order of sequence which drivers must support
before I prepare myself to get comfortable with a refactoring of
firewire-ohci's .probe()/.resume()/suspend()/remove().  Obviously, so far
my assumption was that a successful .suspend() can only ever be followed
by .resume().

> > I think what Alan means is that the suspend/resume code should just
> > mask/unmask interrupts at the OHCI controller, via the OHCI
> > IntEventClear/Set registers (naturally, saving the current mask and
> > restoring it on resume).
> >
> > Of course, there's a lot more to do with an OHCI controller -- as you
> > note. Like stopping running DMA contexts :)  And restarting them on
> > resume.
> >
> > I'd do it, but I'm buried to my eyeballs in tty right now -- not fun. I
> > can _eventually_ do this as I need to address problems with the FW643
> > anyway at some point, but it's going to be a little while.
> 
> Hi Peter,
> 
> Ok, understood. I can certainly attempt a patch if I get time.
> 
> >
> > In the meantime, I'm a little confused: you say you can't test this code
> > because you have no hardware; but then how'd you trip this bug?
> 
> I can test the code in that I have a firewire port on my laptop, but
> haven't got anything to plug into the port.
> I assume that any large changes I make are quite capable of breaking
> something there...

This is a valid assumption.  Some years ago I caused a regression in
stable kernel branches in exactly this way myself.
-- 
Stefan Richter
-=====-===-= --=- ---=-
http://arcgraph.de/sr/

  reply	other threads:[~2013-02-02 15:01 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1359410988-3740-1-git-send-email-mark.einon@gmail.com>
     [not found] ` <20130129000149.5fa5b0c3@stein>
     [not found]   ` <CANK3SE0w08n1RSzqy5dV4eAymAfmnb-a+T9UfVSxw-+3fP-PVA@mail.gmail.com>
2013-01-29 16:04     ` [PATCH] firewire: Fix ohci free_irq() warning Stefan Richter
2013-01-29 17:01       ` Alan Stern
2013-01-30 23:45         ` Mark Einon
2013-01-31 15:04           ` Alan Stern
2013-02-01 19:13             ` Mark Einon
2013-02-01 21:09               ` Peter Hurley
2013-02-01 21:14                 ` Peter Hurley
2013-02-01 23:00                 ` Mark Einon
2013-02-02 15:01                   ` Stefan Richter [this message]
2013-02-02 15:16                     ` Alan Stern
2013-02-02 15:30                       ` Stefan Richter
2013-01-30 23:43       ` Mark Einon
2013-02-02 14:24         ` Stefan Richter
2013-02-02 15:21           ` Alan Stern
2013-02-01 19:50 ` [PATCH v2] " Mark Einon
2013-02-05 10:58   ` [PATCH v3] " Mark Einon
2013-02-17  8:41     ` Stefan Richter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130202160103.0ce1fc43@stein \
    --to=stefanr@s5r6.in-berlin.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux1394-devel@lists.sourceforge.net \
    --cc=mark.einon@gmail.com \
    --cc=peter@hurleysoftware.com \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).