From: Jean Delvare <khali@linux-fr.org>
To: Eduardo Valentin <eduardo.valentin@ti.com>
Cc: Zhang Rui <rui.zhang@intel.com>,
swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
linux@roeck-us.net, devicetree@vger.kernel.org, wni@nvidia.com,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
lm-sensors@lm-sensors.org, grant.likely@linaro.org
Subject: Re: [lm-sensors] [PATCHv9 02/20] thermal: introduce device tree parser
Date: Tue, 19 Nov 2013 15:43:30 +0100 [thread overview]
Message-ID: <20131119154330.1951a978@endymion.delvare> (raw)
In-Reply-To: <528A27EE.9090604@ti.com>
Eduardo, Rui,
I don't want to enter a long discussion here. I don't see get_trend()
being implemented by any currently existing hwmon driver. But if you
think future monitoring chips will be different and will be able to
implement get_trend(), well, you'll know better.
--
Jean Delvare
next prev parent reply other threads:[~2013-11-19 14:43 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-12 19:46 [PATCHv5 00/20] device thermal limits represented in device tree nodes (v5) Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 01/20] thermal: allow registering without .get_temp Eduardo Valentin
2013-11-12 19:46 ` [PATCHv9 02/20] thermal: introduce device tree parser Eduardo Valentin
[not found] ` <1384285582-16933-3-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-11-13 16:57 ` Tomasz Figa
2013-11-14 11:31 ` Eduardo Valentin
2013-11-14 13:40 ` Tomasz Figa
2013-11-15 13:19 ` Eduardo Valentin
2013-11-21 14:57 ` Tomasz Figa
2013-11-21 15:48 ` Eduardo Valentin
2013-11-21 16:32 ` Tomasz Figa
2013-11-22 12:33 ` Eduardo Valentin
[not found] ` <528F4F1E.60903-l0cyMroinI0@public.gmane.org>
2013-11-25 15:31 ` Mark Rutland
[not found] ` <20131125153118.GG32081-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-11-25 15:40 ` Eduardo Valentin
2013-11-25 15:41 ` Eduardo Valentin
2013-11-25 15:14 ` Mark Rutland
2013-11-25 15:34 ` Eduardo Valentin
2013-11-15 8:07 ` [lm-sensors] " Jean Delvare
2013-11-18 6:04 ` Zhang Rui
2013-11-18 14:45 ` Eduardo Valentin
2013-11-19 14:43 ` Jean Delvare [this message]
2013-11-25 15:37 ` Mark Rutland
[not found] ` <20131125153721.GH32081-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-11-25 15:47 ` Eduardo Valentin
2013-12-31 10:17 ` Wei Ni
[not found] ` <52C299A8.4010108-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-01-07 2:48 ` Wei Ni
[not found] ` <52CB6AE2.2090002-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-01-07 11:17 ` Eduardo Valentin
2014-01-08 3:19 ` Wei Ni
2014-01-08 3:24 ` Hu Yaohui
[not found] ` <CAHqbYQvchi3QSgcitUtguFyOJtXhFt5OjcoiSDZnPg9ZyiN4cg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-08 4:16 ` Wei Ni
2014-01-02 2:55 ` Wei Ni
2014-01-02 3:03 ` Wei Ni
2014-01-02 2:59 ` Wei Ni
2014-01-02 17:50 ` Matthew Longnecker
2014-01-06 13:51 ` Mark Rutland
2014-01-06 14:54 ` Eduardo Valentin
2014-01-07 2:44 ` Wei Ni
2014-01-07 12:02 ` Mark Rutland
2014-01-13 21:29 ` Eduardo Valentin
2014-01-14 2:54 ` Wei Ni
2014-01-14 18:48 ` Eduardo Valentin
2014-01-13 15:37 ` Eduardo Valentin
2014-01-02 17:35 ` Matthew Longnecker
[not found] ` <52C5A344.2060908-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-01-06 18:52 ` Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 03/20] thermal: core: introduce thermal_of_cooling_device_register Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 04/20] thermal: cpu_cooling: introduce of_cpufreq_cooling_register Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 05/20] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-11-14 13:17 ` Eduardo Valentin
2013-11-14 22:04 ` Rafael J. Wysocki
2013-11-15 4:41 ` viresh kumar
2014-01-12 14:31 ` Zhang, Rui
2014-01-13 15:08 ` Eduardo Valentin
2014-01-14 19:07 ` Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 06/20] hwmon: lm75: expose to thermal fw via DT nodes Eduardo Valentin
2013-11-15 7:43 ` Jean Delvare
2013-11-18 14:27 ` Eduardo Valentin
2013-11-18 16:25 ` Guenter Roeck
2013-11-18 16:40 ` Eduardo Valentin
2013-11-19 9:39 ` Jean Delvare
2013-11-22 14:37 ` Eduardo Valentin
2013-11-23 18:38 ` Jean Delvare
2013-11-12 19:46 ` [PATCHv5 07/20] hwmon: tmp102: " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 08/20] thermal: ti-soc-thermal: use thermal DT infrastructure Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 09/20] arm: dts: add omap4 CPU thermal data Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 10/20] arm: dts: add omap4430 " Eduardo Valentin
2013-11-20 12:32 ` Pavel Machek
2013-11-21 15:36 ` Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 11/20] arm: dts: add omap4460 " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 12/20] arm: dts: add cooling properties on omap4430 cpu node Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 13/20] arm: dts: add cooling properties on omap4460 " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 14/20] arm: dts: add omap5 GPU thermal data Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 15/20] arm: dts: add omap5 CORE " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 16/20] arm: dts: add omap5 " Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 17/20] arm: dts: add cooling properties on omap5 cpu node Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 18/20] arm: dts: make OMAP443x bandgap node to belong to OCP Eduardo Valentin
2013-11-12 19:46 ` [PATCHv5 19/20] arm: dts: make OMAP4460 " Eduardo Valentin
[not found] ` <1384285582-16933-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-11-12 19:46 ` [PATCHv5 20/20] MAINTAINERS: add maintainer entry for thermal bindings Eduardo Valentin
2013-11-12 19:59 ` Olof Johansson
2013-11-12 20:14 ` Eduardo Valentin
2013-11-13 9:42 ` Mark Rutland
2013-11-13 12:17 ` Eduardo Valentin
2013-11-13 14:46 ` Eduardo Valentin
2013-11-14 13:30 ` [PATCHv6 20/20] MAINTAINERS: add thermal bindings entry in thermal domain Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131119154330.1951a978@endymion.delvare \
--to=khali@linux-fr.org \
--cc=devicetree@vger.kernel.org \
--cc=eduardo.valentin@ti.com \
--cc=grant.likely@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).