From: Peter Zijlstra <peterz@infradead.org>
To: Arjan van de Ven <arjan@linux.intel.com>,
lenb@kernel.org, rjw@rjwysocki.net,
Eliezer Tamir <eliezer.tamir@linux.intel.com>,
Chris Leech <christopher.leech@intel.com>,
David Miller <davem@davemloft.net>,
rui.zhang@intel.com, jacob.jun.pan@linux.intel.com,
Mike Galbraith <bitbucket@online.de>,
Ingo Molnar <mingo@kernel.org>,
hpa@zytor.com, Thomas Gleixner <tglx@linutronix.de>,
Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH 4/7] preempt, locking: Rework local_bh_{dis,en}able()
Date: Wed, 20 Nov 2013 17:04:54 +0100 [thread overview]
Message-ID: <20131120162736.566307357@infradead.org> (raw)
In-Reply-To: 20131120160450.072555619@infradead.org
[-- Attachment #1: peter_zijlstra-inline-local_bh_disable.patch --]
[-- Type: text/plain, Size: 4831 bytes --]
Currently local_bh_disable() is out-of-line for no apparent reason.
So inline it to save a few cycles on call/return nonsense, the
function body is a single add on x86 (a few loads and store extra on
load/store archs).
Also expose two new local_bh functions:
__local_bh_{dis,en}able_ip(unsigned long ip, unsigned int cnt);
Which implement the actual local_bh_{dis,en}able() behaviour.
The next patch uses the exposed @cnt argument to optimize bh lock
functions.
Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Cc: jacob.jun.pan@linux.intel.com
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: hpa@zytor.com
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: lenb@kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
---
include/linux/bottom_half.h | 32 +++++++++++++++++++++++++++++---
include/linux/hardirq.h | 1 +
include/linux/preempt_mask.h | 1 -
kernel/softirq.c | 33 ++++-----------------------------
4 files changed, 34 insertions(+), 33 deletions(-)
--- a/include/linux/bottom_half.h
+++ b/include/linux/bottom_half.h
@@ -1,9 +1,35 @@
#ifndef _LINUX_BH_H
#define _LINUX_BH_H
-extern void local_bh_disable(void);
+#include <linux/preempt.h>
+#include <linux/preempt_mask.h>
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+extern void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
+#else
+static __always_inline void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)
+{
+ preempt_count_add(cnt);
+ barrier();
+}
+#endif
+
+static inline void local_bh_disable(void)
+{
+ __local_bh_disable_ip(_THIS_IP_, SOFTIRQ_DISABLE_OFFSET);
+}
+
extern void _local_bh_enable(void);
-extern void local_bh_enable(void);
-extern void local_bh_enable_ip(unsigned long ip);
+extern void __local_bh_enable_ip(unsigned long ip, unsigned int cnt);
+
+static inline void local_bh_enable_ip(unsigned long ip)
+{
+ __local_bh_enable_ip(ip, SOFTIRQ_DISABLE_OFFSET);
+}
+
+static inline void local_bh_enable(void)
+{
+ __local_bh_enable_ip(_THIS_IP_, SOFTIRQ_DISABLE_OFFSET);
+}
#endif /* _LINUX_BH_H */
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -5,6 +5,7 @@
#include <linux/lockdep.h>
#include <linux/ftrace_irq.h>
#include <linux/vtime.h>
+#include <asm/hardirq.h>
extern void synchronize_irq(unsigned int irq);
--- a/include/linux/preempt_mask.h
+++ b/include/linux/preempt_mask.h
@@ -2,7 +2,6 @@
#define LINUX_PREEMPT_MASK_H
#include <linux/preempt.h>
-#include <asm/hardirq.h>
/*
* We put the hardirq and softirq counter into the preemption
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -89,7 +89,7 @@ static void wakeup_softirqd(void)
* where hardirqs are disabled legitimately:
*/
#ifdef CONFIG_TRACE_IRQFLAGS
-static void __local_bh_disable(unsigned long ip, unsigned int cnt)
+void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)
{
unsigned long flags;
@@ -114,21 +114,8 @@ static void __local_bh_disable(unsigned
if (preempt_count() == cnt)
trace_preempt_off(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1));
}
-#else /* !CONFIG_TRACE_IRQFLAGS */
-static inline void __local_bh_disable(unsigned long ip, unsigned int cnt)
-{
- preempt_count_add(cnt);
- barrier();
-}
#endif /* CONFIG_TRACE_IRQFLAGS */
-void local_bh_disable(void)
-{
- __local_bh_disable(_RET_IP_, SOFTIRQ_DISABLE_OFFSET);
-}
-
-EXPORT_SYMBOL(local_bh_disable);
-
static void __local_bh_enable(unsigned int cnt)
{
WARN_ON_ONCE(!irqs_disabled());
@@ -151,7 +138,7 @@ void _local_bh_enable(void)
EXPORT_SYMBOL(_local_bh_enable);
-static inline void _local_bh_enable_ip(unsigned long ip)
+void __local_bh_enable_ip(unsigned long ip, unsigned int cnt)
{
WARN_ON_ONCE(in_irq() || irqs_disabled());
#ifdef CONFIG_TRACE_IRQFLAGS
@@ -166,7 +153,7 @@ static inline void _local_bh_enable_ip(u
* Keep preemption disabled until we are done with
* softirq processing:
*/
- preempt_count_sub(SOFTIRQ_DISABLE_OFFSET - 1);
+ preempt_count_sub(cnt - 1);
if (unlikely(!in_interrupt() && local_softirq_pending())) {
/*
@@ -183,18 +170,6 @@ static inline void _local_bh_enable_ip(u
preempt_check_resched();
}
-void local_bh_enable(void)
-{
- _local_bh_enable_ip(_RET_IP_);
-}
-EXPORT_SYMBOL(local_bh_enable);
-
-void local_bh_enable_ip(unsigned long ip)
-{
- _local_bh_enable_ip(ip);
-}
-EXPORT_SYMBOL(local_bh_enable_ip);
-
/*
* We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
* but break the loop if need_resched() is set or after 2 ms.
@@ -268,7 +243,7 @@ asmlinkage void __do_softirq(void)
pending = local_softirq_pending();
account_irq_enter_time(current);
- __local_bh_disable(_RET_IP_, SOFTIRQ_OFFSET);
+ __local_bh_disable_ip(_RET_IP_, SOFTIRQ_OFFSET);
lockdep_softirq_start();
cpu = smp_processor_id();
next prev parent reply other threads:[~2013-11-20 16:32 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-20 16:04 [PATCH 0/7] Cure some vaux idle wrackage Peter Zijlstra
2013-11-20 16:04 ` [PATCH 1/7] x86, acpi, idle: Restructure the mwait idle routines Peter Zijlstra
2013-11-20 16:04 ` [PATCH 2/7] sched, preempt: Fixup missed PREEMPT_NEED_RESCHED folding Peter Zijlstra
2013-11-21 8:25 ` Peter Zijlstra
2013-11-20 16:04 ` [PATCH 3/7] idle, thermal, acpi: Remove home grown idle implementations Peter Zijlstra
2013-11-20 16:40 ` Arjan van de Ven
2013-11-20 16:59 ` Peter Zijlstra
2013-11-20 17:23 ` Thomas Gleixner
2013-11-20 17:23 ` Arjan van de Ven
2013-11-20 17:55 ` Thomas Gleixner
2013-11-20 18:21 ` Arjan van de Ven
2013-11-20 19:38 ` Thomas Gleixner
2013-11-20 22:08 ` Jacob Pan
2013-11-21 0:54 ` Jacob Pan
2013-11-21 8:21 ` Peter Zijlstra
2013-11-21 16:07 ` Paul E. McKenney
2013-11-21 16:21 ` Arjan van de Ven
2013-11-21 19:19 ` Paul E. McKenney
2013-11-21 19:45 ` Arjan van de Ven
2013-11-21 20:07 ` Paul E. McKenney
2013-11-22 0:10 ` Jacob Pan
2013-11-22 4:20 ` Paul E. McKenney
2013-11-22 11:33 ` Peter Zijlstra
2013-11-22 17:17 ` Paul E. McKenney
2013-11-21 16:29 ` Peter Zijlstra
2013-11-21 17:27 ` Paul E. McKenney
2013-11-20 16:04 ` Peter Zijlstra [this message]
2013-11-20 16:04 ` [PATCH 5/7] locking: Optimize lock_bh functions Peter Zijlstra
2013-11-20 16:04 ` [PATCH 6/7] sched: Clean up preempt_enable_no_resched() abuse Peter Zijlstra
2013-11-20 18:02 ` Eliezer Tamir
2013-11-20 18:15 ` Peter Zijlstra
2013-11-20 20:14 ` Eliezer Tamir
2013-11-21 10:10 ` Peter Zijlstra
2013-11-21 13:26 ` Eliezer Tamir
2013-11-21 13:39 ` Peter Zijlstra
2013-11-22 6:56 ` Eliezer Tamir
2013-11-22 11:30 ` Peter Zijlstra
2013-11-26 7:15 ` Eliezer Tamir
2013-11-26 10:51 ` Thomas Gleixner
2013-11-20 16:04 ` [PATCH 7/7] preempt: Take away preempt_enable_no_resched() from modules Peter Zijlstra
2013-11-20 18:54 ` Jacob Pan
2013-11-20 19:00 ` Peter Zijlstra
2013-11-20 19:18 ` Peter Zijlstra
2013-11-20 19:29 ` Jacob Pan
2013-11-20 16:34 ` [PATCH 0/7] Cure some vaux idle wrackage Peter Zijlstra
2013-11-20 17:19 ` Jacob Pan
2013-11-20 17:24 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131120162736.566307357@infradead.org \
--to=peterz@infradead.org \
--cc=arjan@linux.intel.com \
--cc=bitbucket@online.de \
--cc=christopher.leech@intel.com \
--cc=davem@davemloft.net \
--cc=eliezer.tamir@linux.intel.com \
--cc=hpa@zytor.com \
--cc=jacob.jun.pan@linux.intel.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=rjw@rjwysocki.net \
--cc=rui.zhang@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).