From: Eduardo Valentin <edubezval@gmail.com>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Eduardo Valentin <eduardo.valentin@ti.com>,
Zhang Rui <rui.zhang@intel.com>,
Amit Daniel Kachhap <amit.daniel@samsung.com>,
Tomasz Figa <t.figa@samsung.com>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Kyungmin Park <kyungmin.park@samsung.com>,
linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 02/10] thermal: exynos: remove unused defines
Date: Thu, 15 May 2014 10:07:24 -0400 [thread overview]
Message-ID: <20140515140724.GA27339@developer> (raw)
In-Reply-To: <1399288539-1793-3-git-send-email-b.zolnierkie@samsung.com>
On Mon, May 05, 2014 at 01:15:31PM +0200, Bartlomiej Zolnierkiewicz wrote:
> There should be no functional changes caused by this patch.
This patch can be merged to patch 01.
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
> drivers/thermal/samsung/exynos_tmu_data.h | 27 +--------------------------
> 1 file changed, 1 insertion(+), 26 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
> index 06c4345..d4eeddb 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -42,20 +42,8 @@
> /* Exynos4210 specific registers */
> #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
> #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
> -#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
> -#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
> -#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
> -#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
> -#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
> -
> -#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
> -#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
> -#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
> -#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
> +
> #define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
> -#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
>
> /* Exynos5250 and Exynos4412 specific registers */
> #define EXYNOS_TMU_TRIMINFO_CON 0x14
> @@ -69,8 +57,6 @@
> #define EXYNOS_TMU_RISE_INT_SHIFT 0
> #define EXYNOS_TMU_FALL_INT_MASK 0x111
> #define EXYNOS_TMU_FALL_INT_SHIFT 12
> -#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
> -#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
> #define EXYNOS_TMU_TRIP_MODE_SHIFT 13
> #define EXYNOS_TMU_TRIP_MODE_MASK 0x7
> #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
> @@ -82,8 +68,6 @@
> #define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
> #define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
> #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
> -#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
> -#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
>
> #define EXYNOS_EMUL_TIME 0x57F0
> #define EXYNOS_EMUL_TIME_MASK 0xffff
> @@ -107,13 +91,11 @@
> #define EXYNOS5440_TMU_S0_7_TH0 0x110
> #define EXYNOS5440_TMU_S0_7_TH1 0x130
> #define EXYNOS5440_TMU_S0_7_TH2 0x150
> -#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0
> #define EXYNOS5440_TMU_S0_7_IRQEN 0x210
> #define EXYNOS5440_TMU_S0_7_IRQ 0x230
> /* exynos5440 common registers */
> #define EXYNOS5440_TMU_IRQ_STATUS 0x000
> #define EXYNOS5440_TMU_PMIN 0x004
> -#define EXYNOS5440_TMU_TEMP 0x008
>
> #define EXYNOS5440_TMU_RISE_INT_MASK 0xf
> #define EXYNOS5440_TMU_RISE_INT_SHIFT 0
> @@ -124,13 +106,6 @@
> #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
> #define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
> #define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
> -#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5
> -#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6
> -#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7
> -#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0
> -#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8
> -#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16
> -#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24
> #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
> #define EXYNOS5440_EFUSE_SWAP_OFFSET 8
>
> --
> 1.8.2.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-05-15 14:07 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-05 11:15 [PATCH 00/10] thermal: exynos: various cleanups Bartlomiej Zolnierkiewicz
2014-05-05 11:15 ` [PATCH 01/10] thermal: exynos: remove unused struct exynos_tmu_registers entries Bartlomiej Zolnierkiewicz
2014-05-19 5:12 ` Amit Kachhap
2014-05-05 11:15 ` [PATCH 02/10] thermal: exynos: remove unused defines Bartlomiej Zolnierkiewicz
2014-05-15 14:07 ` Eduardo Valentin [this message]
2014-05-19 5:17 ` Amit Kachhap
2014-05-05 11:15 ` [PATCH 03/10] thermal: exynos: remove dead code for HW_MODE calibration Bartlomiej Zolnierkiewicz
2014-05-15 14:14 ` Eduardo Valentin
2014-05-15 15:06 ` Bartlomiej Zolnierkiewicz
2014-05-19 5:27 ` Amit Kachhap
2014-05-05 11:15 ` [PATCH 04/10] thermal: exynos: remove dead code for TYPE_TWO_POINT_TRIMMING calibration Bartlomiej Zolnierkiewicz
2014-05-15 14:31 ` Eduardo Valentin
2014-05-15 15:35 ` Bartlomiej Zolnierkiewicz
2014-05-19 5:40 ` Amit Kachhap
2014-05-05 11:15 ` [PATCH 05/10] thermal: exynos: remove redundant pdata checks from exynos_tmu_initialize() Bartlomiej Zolnierkiewicz
2014-05-15 14:47 ` Eduardo Valentin
2014-05-15 16:24 ` Bartlomiej Zolnierkiewicz
2014-05-19 5:47 ` Amit Kachhap
2014-05-05 11:15 ` [PATCH 06/10] thermal: exynos: remove redundant threshold_code " Bartlomiej Zolnierkiewicz
2014-05-15 14:55 ` Eduardo Valentin
2014-05-15 16:56 ` Bartlomiej Zolnierkiewicz
2014-05-19 5:50 ` Amit Kachhap
2014-05-05 11:15 ` [PATCH 07/10] thermal: exynos: simplify temp_to_code() and code_to_temp() Bartlomiej Zolnierkiewicz
2014-05-19 5:54 ` Amit Kachhap
2014-05-05 11:15 ` [PATCH 08/10] thermal: exynos: cache non_hw_trigger_levels in pdata Bartlomiej Zolnierkiewicz
2014-05-19 5:56 ` Amit Kachhap
2014-05-05 11:15 ` [PATCH 09/10] thermal: exynos: remove redundant pdata checks from exynos_tmu_control() Bartlomiej Zolnierkiewicz
2014-05-15 15:03 ` Eduardo Valentin
2014-05-15 17:06 ` Bartlomiej Zolnierkiewicz
2014-05-19 6:05 ` Amit Kachhap
2014-05-05 11:15 ` [PATCH 10/10] thermal: exynos: remove identical values from exynos*_tmu_registers structures Bartlomiej Zolnierkiewicz
2014-05-19 6:11 ` Amit Kachhap
2014-05-15 9:06 ` [PATCH 00/10] thermal: exynos: various cleanups Zhang Rui
2014-05-19 6:16 ` Amit Kachhap
2014-05-19 11:05 ` Bartlomiej Zolnierkiewicz
2014-05-19 11:09 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140515140724.GA27339@developer \
--to=edubezval@gmail.com \
--cc=amit.daniel@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=eduardo.valentin@ti.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=rui.zhang@intel.com \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).