linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lukasz Majewski <l.majewski@samsung.com>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Amit Daniel Kachhap <amit.daniel@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 00/33] thermal: exynos: convert the driver to use per-SoC type operations
Date: Thu, 20 Nov 2014 12:58:04 +0100	[thread overview]
Message-ID: <20141120125804.5248eb61@amdc2363> (raw)
In-Reply-To: <1415890888-8881-1-git-send-email-b.zolnierkie@samsung.com>

Hi Eduardo,

> Hi,
> 
> This patch series replaces the hardware registers abstractions in
> the Exynos thermal driver by the usage of per-SoC type operations.
> Such solution provides simpler, easier to understand code and
> allows removal of ~250 LOCs (~11% of the whole source code) from
> the driver.  Some other driver improvements are now also possible
> thanks to these changes but are scheduled at later time (like
> consolidating code for clearing IRQs using INTCLEAR register).
> 
> The patchset should not cause any functionality changes.  This
> means that unless there are some bugs in the patches itself there
> should be no behavior changes for the driver (this also includes
> lack of changes in the way hardware is accessed by the driver).
> 
> All testing was done on (Exynos4412 SoC based) ODROID U3 board
> (some additional patches are needed to make the Exynos thermal
> driver work on this hardware).

For the whole patch series:

Repository:
kernel_linux-soc-thermal/next
SHA1: 4027494124fd88e5d51127eebba315de5d8d57c8

Test HW:

Trats2 - Exynos4412
Tested-by: Lukasz Majewski <l.majewski@samsung.com>

Trats - Exynos4210
Tested-by: Lukasz Majewski <l.majewski@samsung.com>

ARNDALE(SMDK) - Exynos5250
Tested-by: Lukasz Majewski <l.majewski@samsung.com>

ARNDALE OCTA - Exynos5420
Tested-by: Lukasz Majewski <l.majewski@samsung.com>


> 
> Depends on:
> - 'next' branch of linux-soc-thermal.git kernel tree from Eduardo
> 
> Changes since v1 (https://lkml.org/lkml/2014/9/18/305):
> - rebased on top of the current linux-soc-thermal kernel
> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
> 
> Bartlomiej Zolnierkiewicz (33):
>   thermal: exynos: remove needless triminfo_data abstraction
>   thermal: exynos: remove needless tmu_status abstraction
>   thermal: exynos: remove needless threshold_temp abstraction
>   thermal: exynos: remove needless triminfo_ctrl abstraction
>   thermal: exynos: remove needless test_mux_addr_shift abstraction
>   thermal: exynos: remove needless therm_trip_[mode,mask]_shift
>     abstractions
>   thermal: exynos: remove needless therm_trip_en_shift abstraction
>   thermal: exynos: remove needless emul_temp_shift abstraction
>   thermal: exynos: remove needless emul_time_shift abstraction
>   thermal: exynos: replace tmu_irqstatus check by Exynos5440 one
>   thermal: exynos: replace tmu_pmin check by Exynos5440 one
>   thermal: exynos: simplify HW_TRIP level setting
>   thermal: exynos: replace threshold_falling check by Exynos SoC type
>     one
>   thermal: exynos: remove TMU_SUPPORT_READY_STATUS flag
>   thermal: exynos: remove TMU_SUPPORT_TRIM_RELOAD flag
>   thermal: exynos: add sanitize_temp_error() helper
>   thermal: exynos: add get_th_reg() helper
>   thermal: exynos: add ->tmu_initialize method
>   thermal: exynos: add get_con_reg() helper
>   thermal: exynos: add ->tmu_control method
>   thermal: exynos: add ->tmu_read method
>   thermal: exynos: add get_emul_con_reg() helper
>   thermal: exynos: add ->tmu_set_emulation method
>   thermal: exynos: add ->tmu_clear_irqs method
>   thermal: exynos: remove TMU_SUPPORT_FALLING_TRIP flag
>   thermal: exynos: remove TMU_SUPPORT_EMUL_TIME flag
>   thermal: exynos: remove TMU_SUPPORT_EMULATION flag
>   thermal: exynos: remove TMU_SUPPORT_ADDRESS_MULTIPLE flag
>   thermal: exynos: remove TMU_SUPPORT_MULTI_INST flag
>   thermal: exynos: remove test_mux pdata field
>   thermal: exynos: remove SoC type ifdefs
>   thermal: exynos: remove __EXYNOS5420_TMU_DATA macro
>   thermal: exynos: remove exynos_tmu_data.h include
> 
>  drivers/thermal/samsung/exynos_thermal_common.h |   1 -
>  drivers/thermal/samsung/exynos_tmu.c            | 692
> ++++++++++++++++--------
> drivers/thermal/samsung/exynos_tmu.h            | 123 +----
> drivers/thermal/samsung/exynos_tmu_data.c       | 239 +-------
> drivers/thermal/samsung/exynos_tmu_data.h       | 159 ------ 5 files
> changed, 485 insertions(+), 729 deletions(-) delete mode 100644
> drivers/thermal/samsung/exynos_tmu_data.h
> 



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

      parent reply	other threads:[~2014-11-20 11:58 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-13 15:00 [PATCH v2 00/33] thermal: exynos: convert the driver to use per-SoC type operations Bartlomiej Zolnierkiewicz
2014-11-13 15:00 ` [PATCH v2 01/33] thermal: exynos: remove needless triminfo_data abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:00 ` [PATCH v2 02/33] thermal: exynos: remove needless tmu_status abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:00 ` [PATCH v2 03/33] thermal: exynos: remove needless threshold_temp abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:00 ` [PATCH v2 04/33] thermal: exynos: remove needless triminfo_ctrl abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 05/33] thermal: exynos: remove needless test_mux_addr_shift abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 06/33] thermal: exynos: remove needless therm_trip_[mode,mask]_shift abstractions Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 07/33] thermal: exynos: remove needless therm_trip_en_shift abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 08/33] thermal: exynos: remove needless emul_temp_shift abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 09/33] thermal: exynos: remove needless emul_time_shift abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 10/33] thermal: exynos: replace tmu_irqstatus check by Exynos5440 one Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 11/33] thermal: exynos: replace tmu_pmin " Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 12/33] thermal: exynos: simplify HW_TRIP level setting Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 13/33] thermal: exynos: replace threshold_falling check by Exynos SoC type one Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 14/33] thermal: exynos: remove TMU_SUPPORT_READY_STATUS flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 15/33] thermal: exynos: remove TMU_SUPPORT_TRIM_RELOAD flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 16/33] thermal: exynos: add sanitize_temp_error() helper Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 17/33] thermal: exynos: add get_th_reg() helper Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 18/33] thermal: exynos: add ->tmu_initialize method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 19/33] thermal: exynos: add get_con_reg() helper Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 20/33] thermal: exynos: add ->tmu_control method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 21/33] thermal: exynos: add ->tmu_read method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 22/33] thermal: exynos: add get_emul_con_reg() helper Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 23/33] thermal: exynos: add ->tmu_set_emulation method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 24/33] thermal: exynos: add ->tmu_clear_irqs method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 25/33] thermal: exynos: remove TMU_SUPPORT_FALLING_TRIP flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 26/33] thermal: exynos: remove TMU_SUPPORT_EMUL_TIME flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 27/33] thermal: exynos: remove TMU_SUPPORT_EMULATION flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 28/33] thermal: exynos: remove TMU_SUPPORT_ADDRESS_MULTIPLE flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 29/33] thermal: exynos: remove TMU_SUPPORT_MULTI_INST flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 30/33] thermal: exynos: remove test_mux pdata field Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 31/33] thermal: exynos: remove SoC type ifdefs Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 32/33] thermal: exynos: remove __EXYNOS5420_TMU_DATA macro Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 33/33] thermal: exynos: remove exynos_tmu_data.h include Bartlomiej Zolnierkiewicz
2014-11-15 18:47 ` [PATCH v2 00/33] thermal: exynos: convert the driver to use per-SoC type operations Eduardo Valentin
2014-11-20 11:58 ` Lukasz Majewski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141120125804.5248eb61@amdc2363 \
    --to=l.majewski@samsung.com \
    --cc=amit.daniel@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=edubezval@gmail.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).