* [PATCH v2] thermal: exynos: add special clock support @ 2014-11-26 0:51 Abhilash Kesavan 2014-11-26 14:45 ` Eduardo Valentin 0 siblings, 1 reply; 6+ messages in thread From: Abhilash Kesavan @ 2014-11-26 0:51 UTC (permalink / raw) To: rui.zhang, edubezval, linux-pm Cc: linux-kernel, b.zolnierkie, amit.daniel, kesavan.abhilash, l.majewski, cw00.choi Exynos7 has a special clock required for the functional operation of the TMU that is not present in earlier SoCs. Add support for this clock and update the binding documentation. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> --- Changes since v1: - Added a per-soc flag to indicate the presence of special clock - Changed the name of special clock from "tmu_sclk" to "sclk" - Fixed the error handling for sclk Tested on 5420 and 5800 based chromebooks, no change in existing behavior. .../devicetree/bindings/thermal/exynos-thermal.txt | 3 ++ drivers/thermal/samsung/exynos_tmu.c | 31 ++++++++++++++++---- 2 files changed, 29 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index ae738f5..acf4705 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -32,10 +32,13 @@ - clocks : The main clocks for TMU device -- 1. operational clock for TMU channel -- 2. optional clock to access the shared registers of TMU channel + -- 3. optional special clock for functional operation - clock-names : Thermal system clock name -- "tmu_apbif" operational clock for current TMU channel -- "tmu_triminfo_apbif" clock to access the shared triminfo register for current TMU channel + -- "sclk" clock for functional operation of the current TMU + channel - vtmu-supply: This entry is optional and provides the regulator node supplying voltage to TMU. If needed this entry can be placed inside board/platform specific dts file. diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index d44d91d..8ed8409 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -123,11 +123,14 @@ * @base: base address of the single instance of the TMU controller. * @base_second: base address of the common registers of the TMU controller. * @irq: irq number of the TMU controller. + * @needs_sclk: SoC specific flag indicating that sclk is required for + functional operation of the TMU controller. * @soc: id of the SOC type. * @irq_work: pointer to the irq work structure. * @lock: lock to implement synchronization. * @clk: pointer to the clock structure. * @clk_sec: pointer to the clock structure for accessing the base_second. + * @sclk: pointer to the clock structure for accessing the tmu special clock. * @temp_error1: fused value of the first point trim. * @temp_error2: fused value of the second point trim. * @regulator: pointer to the TMU regulator structure. @@ -144,10 +147,11 @@ struct exynos_tmu_data { void __iomem *base; void __iomem *base_second; int irq; + bool needs_sclk; enum soc_type soc; struct work_struct irq_work; struct mutex lock; - struct clk *clk, *clk_sec; + struct clk *clk, *clk_sec, *sclk; u8 temp_error1, temp_error2; struct regulator *regulator; struct thermal_sensor_conf *reg_conf; @@ -883,10 +887,24 @@ static int exynos_tmu_probe(struct platform_device *pdev) goto err_clk_sec; } + if (data->needs_sclk) { + data->sclk = devm_clk_get(&pdev->dev, "sclk"); + if (IS_ERR(data->sclk)) { + dev_err(&pdev->dev, "Failed to get sclk\n"); + goto err_clk; + } else { + ret = clk_prepare_enable(data->sclk); + if (ret) { + dev_err(&pdev->dev, "Failed to enable sclk\n"); + goto err_clk; + } + } + } + ret = exynos_tmu_initialize(pdev); if (ret) { dev_err(&pdev->dev, "Failed to initialize TMU\n"); - goto err_clk; + goto err_sclk; } exynos_tmu_control(pdev, true); @@ -896,7 +914,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) sizeof(struct thermal_sensor_conf), GFP_KERNEL); if (!sensor_conf) { ret = -ENOMEM; - goto err_clk; + goto err_sclk; } sprintf(sensor_conf->name, "therm_zone%d", data->id); sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; @@ -928,7 +946,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) ret = exynos_register_thermal(sensor_conf); if (ret) { dev_err(&pdev->dev, "Failed to register thermal interface\n"); - goto err_clk; + goto err_sclk; } data->reg_conf = sensor_conf; @@ -936,10 +954,12 @@ static int exynos_tmu_probe(struct platform_device *pdev) IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); if (ret) { dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); - goto err_clk; + goto err_sclk; } return 0; +err_sclk: + clk_disable_unprepare(data->sclk); err_clk: clk_unprepare(data->clk); err_clk_sec: @@ -956,6 +976,7 @@ static int exynos_tmu_remove(struct platform_device *pdev) exynos_tmu_control(pdev, false); + clk_disable_unprepare(data->sclk); clk_unprepare(data->clk); if (!IS_ERR(data->clk_sec)) clk_unprepare(data->clk_sec); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2] thermal: exynos: add special clock support 2014-11-26 0:51 [PATCH v2] thermal: exynos: add special clock support Abhilash Kesavan @ 2014-11-26 14:45 ` Eduardo Valentin 2014-11-26 15:04 ` Abhilash Kesavan 0 siblings, 1 reply; 6+ messages in thread From: Eduardo Valentin @ 2014-11-26 14:45 UTC (permalink / raw) To: Abhilash Kesavan Cc: rui.zhang, linux-pm, linux-kernel, b.zolnierkie, amit.daniel, kesavan.abhilash, l.majewski, cw00.choi [-- Attachment #1: Type: text/plain, Size: 5623 bytes --] Abhilash, On Wed, Nov 26, 2014 at 06:21:10AM +0530, Abhilash Kesavan wrote: > Exynos7 has a special clock required for the functional operation > of the TMU that is not present in earlier SoCs. Add support for > this clock and update the binding documentation. > > Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> > --- > Changes since v1: > - Added a per-soc flag to indicate the presence of special clock > - Changed the name of special clock from "tmu_sclk" to "sclk" > - Fixed the error handling for sclk > > Tested on 5420 and 5800 based chromebooks, no change in existing behavior. > > .../devicetree/bindings/thermal/exynos-thermal.txt | 3 ++ > drivers/thermal/samsung/exynos_tmu.c | 31 ++++++++++++++++---- > 2 files changed, 29 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > index ae738f5..acf4705 100644 > --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > @@ -32,10 +32,13 @@ > - clocks : The main clocks for TMU device > -- 1. operational clock for TMU channel > -- 2. optional clock to access the shared registers of TMU channel > + -- 3. optional special clock for functional operation > - clock-names : Thermal system clock name > -- "tmu_apbif" operational clock for current TMU channel > -- "tmu_triminfo_apbif" clock to access the shared triminfo register > for current TMU channel > + -- "sclk" clock for functional operation of the current TMU > + channel > - vtmu-supply: This entry is optional and provides the regulator node supplying > voltage to TMU. If needed this entry can be placed inside > board/platform specific dts file. > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > index d44d91d..8ed8409 100644 > --- a/drivers/thermal/samsung/exynos_tmu.c > +++ b/drivers/thermal/samsung/exynos_tmu.c > @@ -123,11 +123,14 @@ > * @base: base address of the single instance of the TMU controller. > * @base_second: base address of the common registers of the TMU controller. > * @irq: irq number of the TMU controller. > + * @needs_sclk: SoC specific flag indicating that sclk is required for > + functional operation of the TMU controller. > * @soc: id of the SOC type. > * @irq_work: pointer to the irq work structure. > * @lock: lock to implement synchronization. > * @clk: pointer to the clock structure. > * @clk_sec: pointer to the clock structure for accessing the base_second. > + * @sclk: pointer to the clock structure for accessing the tmu special clock. > * @temp_error1: fused value of the first point trim. > * @temp_error2: fused value of the second point trim. > * @regulator: pointer to the TMU regulator structure. > @@ -144,10 +147,11 @@ struct exynos_tmu_data { > void __iomem *base; > void __iomem *base_second; > int irq; > + bool needs_sclk; > enum soc_type soc; > struct work_struct irq_work; > struct mutex lock; > - struct clk *clk, *clk_sec; > + struct clk *clk, *clk_sec, *sclk; > u8 temp_error1, temp_error2; > struct regulator *regulator; > struct thermal_sensor_conf *reg_conf; > @@ -883,10 +887,24 @@ static int exynos_tmu_probe(struct platform_device *pdev) > goto err_clk_sec; > } > > + if (data->needs_sclk) { Based on the trend we see from Bartlomiej's and Lukasz' works, you should be asking for SoC version, not adding a flag. Can you please crosscheck with them? Cheers, Eduardo Valentin > + data->sclk = devm_clk_get(&pdev->dev, "sclk"); > + if (IS_ERR(data->sclk)) { > + dev_err(&pdev->dev, "Failed to get sclk\n"); > + goto err_clk; > + } else { > + ret = clk_prepare_enable(data->sclk); > + if (ret) { > + dev_err(&pdev->dev, "Failed to enable sclk\n"); > + goto err_clk; > + } > + } > + } > + > ret = exynos_tmu_initialize(pdev); > if (ret) { > dev_err(&pdev->dev, "Failed to initialize TMU\n"); > - goto err_clk; > + goto err_sclk; > } > > exynos_tmu_control(pdev, true); > @@ -896,7 +914,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) > sizeof(struct thermal_sensor_conf), GFP_KERNEL); > if (!sensor_conf) { > ret = -ENOMEM; > - goto err_clk; > + goto err_sclk; > } > sprintf(sensor_conf->name, "therm_zone%d", data->id); > sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; > @@ -928,7 +946,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) > ret = exynos_register_thermal(sensor_conf); > if (ret) { > dev_err(&pdev->dev, "Failed to register thermal interface\n"); > - goto err_clk; > + goto err_sclk; > } > data->reg_conf = sensor_conf; > > @@ -936,10 +954,12 @@ static int exynos_tmu_probe(struct platform_device *pdev) > IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); > if (ret) { > dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); > - goto err_clk; > + goto err_sclk; > } > > return 0; > +err_sclk: > + clk_disable_unprepare(data->sclk); > err_clk: > clk_unprepare(data->clk); > err_clk_sec: > @@ -956,6 +976,7 @@ static int exynos_tmu_remove(struct platform_device *pdev) > > exynos_tmu_control(pdev, false); > > + clk_disable_unprepare(data->sclk); > clk_unprepare(data->clk); > if (!IS_ERR(data->clk_sec)) > clk_unprepare(data->clk_sec); > -- > 1.7.9.5 > [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 473 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] thermal: exynos: add special clock support 2014-11-26 14:45 ` Eduardo Valentin @ 2014-11-26 15:04 ` Abhilash Kesavan 2014-11-26 15:14 ` Eduardo Valentin 0 siblings, 1 reply; 6+ messages in thread From: Abhilash Kesavan @ 2014-11-26 15:04 UTC (permalink / raw) To: Eduardo Valentin Cc: Zhang Rui, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Bartlomiej Zolnierkiewicz, Amit Kachhap, Lukasz Majewski, 최찬우 Hi Eduardo, On Wed, Nov 26, 2014 at 8:15 PM, Eduardo Valentin <edubezval@gmail.com> wrote: > > Abhilash, > > On Wed, Nov 26, 2014 at 06:21:10AM +0530, Abhilash Kesavan wrote: >> Exynos7 has a special clock required for the functional operation >> of the TMU that is not present in earlier SoCs. Add support for >> this clock and update the binding documentation. >> >> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> >> --- >> Changes since v1: >> - Added a per-soc flag to indicate the presence of special clock >> - Changed the name of special clock from "tmu_sclk" to "sclk" >> - Fixed the error handling for sclk >> >> Tested on 5420 and 5800 based chromebooks, no change in existing behavior. >> >> .../devicetree/bindings/thermal/exynos-thermal.txt | 3 ++ >> drivers/thermal/samsung/exynos_tmu.c | 31 ++++++++++++++++---- >> 2 files changed, 29 insertions(+), 5 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> index ae738f5..acf4705 100644 >> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> @@ -32,10 +32,13 @@ >> - clocks : The main clocks for TMU device >> -- 1. operational clock for TMU channel >> -- 2. optional clock to access the shared registers of TMU channel >> + -- 3. optional special clock for functional operation >> - clock-names : Thermal system clock name >> -- "tmu_apbif" operational clock for current TMU channel >> -- "tmu_triminfo_apbif" clock to access the shared triminfo register >> for current TMU channel >> + -- "sclk" clock for functional operation of the current TMU >> + channel >> - vtmu-supply: This entry is optional and provides the regulator node supplying >> voltage to TMU. If needed this entry can be placed inside >> board/platform specific dts file. >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >> index d44d91d..8ed8409 100644 >> --- a/drivers/thermal/samsung/exynos_tmu.c >> +++ b/drivers/thermal/samsung/exynos_tmu.c >> @@ -123,11 +123,14 @@ >> * @base: base address of the single instance of the TMU controller. >> * @base_second: base address of the common registers of the TMU controller. >> * @irq: irq number of the TMU controller. >> + * @needs_sclk: SoC specific flag indicating that sclk is required for >> + functional operation of the TMU controller. >> * @soc: id of the SOC type. >> * @irq_work: pointer to the irq work structure. >> * @lock: lock to implement synchronization. >> * @clk: pointer to the clock structure. >> * @clk_sec: pointer to the clock structure for accessing the base_second. >> + * @sclk: pointer to the clock structure for accessing the tmu special clock. >> * @temp_error1: fused value of the first point trim. >> * @temp_error2: fused value of the second point trim. >> * @regulator: pointer to the TMU regulator structure. >> @@ -144,10 +147,11 @@ struct exynos_tmu_data { >> void __iomem *base; >> void __iomem *base_second; >> int irq; >> + bool needs_sclk; >> enum soc_type soc; >> struct work_struct irq_work; >> struct mutex lock; >> - struct clk *clk, *clk_sec; >> + struct clk *clk, *clk_sec, *sclk; >> u8 temp_error1, temp_error2; >> struct regulator *regulator; >> struct thermal_sensor_conf *reg_conf; >> @@ -883,10 +887,24 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> goto err_clk_sec; >> } >> >> + if (data->needs_sclk) { > > Based on the trend we see from Bartlomiej's and Lukasz' works, you > should be asking for SoC version, not adding a flag. Can you please > crosscheck with them? I planned to populate this flag as true for Exynos7 in exynos_map_dt_data() where other soc specific methods are being setup. Bartlomiej/Lukasz can you kindly comment on if you would prefer the check to be based on the SoC version. Regards, Abhilash > > Cheers, > > Eduardo Valentin > >> + data->sclk = devm_clk_get(&pdev->dev, "sclk"); >> + if (IS_ERR(data->sclk)) { >> + dev_err(&pdev->dev, "Failed to get sclk\n"); >> + goto err_clk; >> + } else { >> + ret = clk_prepare_enable(data->sclk); >> + if (ret) { >> + dev_err(&pdev->dev, "Failed to enable sclk\n"); >> + goto err_clk; >> + } >> + } >> + } >> + >> ret = exynos_tmu_initialize(pdev); >> if (ret) { >> dev_err(&pdev->dev, "Failed to initialize TMU\n"); >> - goto err_clk; >> + goto err_sclk; >> } >> >> exynos_tmu_control(pdev, true); >> @@ -896,7 +914,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> sizeof(struct thermal_sensor_conf), GFP_KERNEL); >> if (!sensor_conf) { >> ret = -ENOMEM; >> - goto err_clk; >> + goto err_sclk; >> } >> sprintf(sensor_conf->name, "therm_zone%d", data->id); >> sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; >> @@ -928,7 +946,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> ret = exynos_register_thermal(sensor_conf); >> if (ret) { >> dev_err(&pdev->dev, "Failed to register thermal interface\n"); >> - goto err_clk; >> + goto err_sclk; >> } >> data->reg_conf = sensor_conf; >> >> @@ -936,10 +954,12 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); >> if (ret) { >> dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); >> - goto err_clk; >> + goto err_sclk; >> } >> >> return 0; >> +err_sclk: >> + clk_disable_unprepare(data->sclk); >> err_clk: >> clk_unprepare(data->clk); >> err_clk_sec: >> @@ -956,6 +976,7 @@ static int exynos_tmu_remove(struct platform_device *pdev) >> >> exynos_tmu_control(pdev, false); >> >> + clk_disable_unprepare(data->sclk); >> clk_unprepare(data->clk); >> if (!IS_ERR(data->clk_sec)) >> clk_unprepare(data->clk_sec); >> -- >> 1.7.9.5 >> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] thermal: exynos: add special clock support 2014-11-26 15:04 ` Abhilash Kesavan @ 2014-11-26 15:14 ` Eduardo Valentin 2014-11-26 15:31 ` Abhilash Kesavan 0 siblings, 1 reply; 6+ messages in thread From: Eduardo Valentin @ 2014-11-26 15:14 UTC (permalink / raw) To: Abhilash Kesavan Cc: Zhang Rui, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Bartlomiej Zolnierkiewicz, Amit Kachhap, Lukasz Majewski, 최찬우 [-- Attachment #1: Type: text/plain, Size: 7466 bytes --] Abhilash, On Wed, Nov 26, 2014 at 08:34:19PM +0530, Abhilash Kesavan wrote: > Hi Eduardo, > > On Wed, Nov 26, 2014 at 8:15 PM, Eduardo Valentin <edubezval@gmail.com> wrote: > > > > Abhilash, > > > > On Wed, Nov 26, 2014 at 06:21:10AM +0530, Abhilash Kesavan wrote: > >> Exynos7 has a special clock required for the functional operation > >> of the TMU that is not present in earlier SoCs. Add support for > >> this clock and update the binding documentation. > >> > >> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> > >> --- > >> Changes since v1: > >> - Added a per-soc flag to indicate the presence of special clock > >> - Changed the name of special clock from "tmu_sclk" to "sclk" > >> - Fixed the error handling for sclk > >> > >> Tested on 5420 and 5800 based chromebooks, no change in existing behavior. > >> > >> .../devicetree/bindings/thermal/exynos-thermal.txt | 3 ++ > >> drivers/thermal/samsung/exynos_tmu.c | 31 ++++++++++++++++---- > >> 2 files changed, 29 insertions(+), 5 deletions(-) > >> > >> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > >> index ae738f5..acf4705 100644 > >> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > >> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt > >> @@ -32,10 +32,13 @@ > >> - clocks : The main clocks for TMU device > >> -- 1. operational clock for TMU channel > >> -- 2. optional clock to access the shared registers of TMU channel > >> + -- 3. optional special clock for functional operation > >> - clock-names : Thermal system clock name > >> -- "tmu_apbif" operational clock for current TMU channel > >> -- "tmu_triminfo_apbif" clock to access the shared triminfo register > >> for current TMU channel > >> + -- "sclk" clock for functional operation of the current TMU > >> + channel > >> - vtmu-supply: This entry is optional and provides the regulator node supplying > >> voltage to TMU. If needed this entry can be placed inside > >> board/platform specific dts file. > >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c > >> index d44d91d..8ed8409 100644 > >> --- a/drivers/thermal/samsung/exynos_tmu.c > >> +++ b/drivers/thermal/samsung/exynos_tmu.c > >> @@ -123,11 +123,14 @@ > >> * @base: base address of the single instance of the TMU controller. > >> * @base_second: base address of the common registers of the TMU controller. > >> * @irq: irq number of the TMU controller. > >> + * @needs_sclk: SoC specific flag indicating that sclk is required for > >> + functional operation of the TMU controller. > >> * @soc: id of the SOC type. > >> * @irq_work: pointer to the irq work structure. > >> * @lock: lock to implement synchronization. > >> * @clk: pointer to the clock structure. > >> * @clk_sec: pointer to the clock structure for accessing the base_second. > >> + * @sclk: pointer to the clock structure for accessing the tmu special clock. > >> * @temp_error1: fused value of the first point trim. > >> * @temp_error2: fused value of the second point trim. > >> * @regulator: pointer to the TMU regulator structure. > >> @@ -144,10 +147,11 @@ struct exynos_tmu_data { > >> void __iomem *base; > >> void __iomem *base_second; > >> int irq; > >> + bool needs_sclk; > >> enum soc_type soc; > >> struct work_struct irq_work; > >> struct mutex lock; > >> - struct clk *clk, *clk_sec; > >> + struct clk *clk, *clk_sec, *sclk; > >> u8 temp_error1, temp_error2; > >> struct regulator *regulator; > >> struct thermal_sensor_conf *reg_conf; > >> @@ -883,10 +887,24 @@ static int exynos_tmu_probe(struct platform_device *pdev) > >> goto err_clk_sec; > >> } > >> > >> + if (data->needs_sclk) { > > > > Based on the trend we see from Bartlomiej's and Lukasz' works, you > > should be asking for SoC version, not adding a flag. Can you please > > crosscheck with them? > > I planned to populate this flag as true for Exynos7 in > exynos_map_dt_data() where other soc specific methods are being setup. Well, that I wouldn't expect different, otherwise how your code is supposed to work, right? > > Bartlomiej/Lukasz can you kindly comment on if you would prefer the > check to be based on the SoC version. > Have a look on how Bartz has removed the flag based code in my -linus branch. Here is an example: https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git/commit/?h=linus&id=ef3f80fc7f79c32a1b015afcbffce2a2630011a4 > Regards, > Abhilash > > > > Cheers, > > > > Eduardo Valentin > > > >> + data->sclk = devm_clk_get(&pdev->dev, "sclk"); > >> + if (IS_ERR(data->sclk)) { > >> + dev_err(&pdev->dev, "Failed to get sclk\n"); > >> + goto err_clk; > >> + } else { > >> + ret = clk_prepare_enable(data->sclk); > >> + if (ret) { > >> + dev_err(&pdev->dev, "Failed to enable sclk\n"); > >> + goto err_clk; > >> + } > >> + } > >> + } > >> + > >> ret = exynos_tmu_initialize(pdev); > >> if (ret) { > >> dev_err(&pdev->dev, "Failed to initialize TMU\n"); > >> - goto err_clk; > >> + goto err_sclk; > >> } > >> > >> exynos_tmu_control(pdev, true); > >> @@ -896,7 +914,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) > >> sizeof(struct thermal_sensor_conf), GFP_KERNEL); > >> if (!sensor_conf) { > >> ret = -ENOMEM; > >> - goto err_clk; > >> + goto err_sclk; > >> } > >> sprintf(sensor_conf->name, "therm_zone%d", data->id); > >> sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; > >> @@ -928,7 +946,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) > >> ret = exynos_register_thermal(sensor_conf); > >> if (ret) { > >> dev_err(&pdev->dev, "Failed to register thermal interface\n"); > >> - goto err_clk; > >> + goto err_sclk; > >> } > >> data->reg_conf = sensor_conf; > >> > >> @@ -936,10 +954,12 @@ static int exynos_tmu_probe(struct platform_device *pdev) > >> IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); > >> if (ret) { > >> dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); > >> - goto err_clk; > >> + goto err_sclk; > >> } > >> > >> return 0; > >> +err_sclk: > >> + clk_disable_unprepare(data->sclk); > >> err_clk: > >> clk_unprepare(data->clk); > >> err_clk_sec: > >> @@ -956,6 +976,7 @@ static int exynos_tmu_remove(struct platform_device *pdev) > >> > >> exynos_tmu_control(pdev, false); > >> > >> + clk_disable_unprepare(data->sclk); > >> clk_unprepare(data->clk); > >> if (!IS_ERR(data->clk_sec)) > >> clk_unprepare(data->clk_sec); > >> -- > >> 1.7.9.5 > >> [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 473 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] thermal: exynos: add special clock support 2014-11-26 15:14 ` Eduardo Valentin @ 2014-11-26 15:31 ` Abhilash Kesavan 2014-12-03 12:26 ` Abhilash Kesavan 0 siblings, 1 reply; 6+ messages in thread From: Abhilash Kesavan @ 2014-11-26 15:31 UTC (permalink / raw) To: Eduardo Valentin Cc: Zhang Rui, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Bartlomiej Zolnierkiewicz, Amit Kachhap, Lukasz Majewski, 최찬우 Hi Eduardo, On Wed, Nov 26, 2014 at 8:44 PM, Eduardo Valentin <edubezval@gmail.com> wrote: > Abhilash, > > On Wed, Nov 26, 2014 at 08:34:19PM +0530, Abhilash Kesavan wrote: >> Hi Eduardo, >> >> On Wed, Nov 26, 2014 at 8:15 PM, Eduardo Valentin <edubezval@gmail.com> wrote: >> > >> > Abhilash, >> > >> > On Wed, Nov 26, 2014 at 06:21:10AM +0530, Abhilash Kesavan wrote: >> >> Exynos7 has a special clock required for the functional operation >> >> of the TMU that is not present in earlier SoCs. Add support for >> >> this clock and update the binding documentation. >> >> >> >> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> >> >> --- >> >> Changes since v1: >> >> - Added a per-soc flag to indicate the presence of special clock >> >> - Changed the name of special clock from "tmu_sclk" to "sclk" >> >> - Fixed the error handling for sclk >> >> >> >> Tested on 5420 and 5800 based chromebooks, no change in existing behavior. >> >> >> >> .../devicetree/bindings/thermal/exynos-thermal.txt | 3 ++ >> >> drivers/thermal/samsung/exynos_tmu.c | 31 ++++++++++++++++---- >> >> 2 files changed, 29 insertions(+), 5 deletions(-) >> >> >> >> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> >> index ae738f5..acf4705 100644 >> >> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> >> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >> >> @@ -32,10 +32,13 @@ >> >> - clocks : The main clocks for TMU device >> >> -- 1. operational clock for TMU channel >> >> -- 2. optional clock to access the shared registers of TMU channel >> >> + -- 3. optional special clock for functional operation >> >> - clock-names : Thermal system clock name >> >> -- "tmu_apbif" operational clock for current TMU channel >> >> -- "tmu_triminfo_apbif" clock to access the shared triminfo register >> >> for current TMU channel >> >> + -- "sclk" clock for functional operation of the current TMU >> >> + channel >> >> - vtmu-supply: This entry is optional and provides the regulator node supplying >> >> voltage to TMU. If needed this entry can be placed inside >> >> board/platform specific dts file. >> >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >> >> index d44d91d..8ed8409 100644 >> >> --- a/drivers/thermal/samsung/exynos_tmu.c >> >> +++ b/drivers/thermal/samsung/exynos_tmu.c >> >> @@ -123,11 +123,14 @@ >> >> * @base: base address of the single instance of the TMU controller. >> >> * @base_second: base address of the common registers of the TMU controller. >> >> * @irq: irq number of the TMU controller. >> >> + * @needs_sclk: SoC specific flag indicating that sclk is required for >> >> + functional operation of the TMU controller. >> >> * @soc: id of the SOC type. >> >> * @irq_work: pointer to the irq work structure. >> >> * @lock: lock to implement synchronization. >> >> * @clk: pointer to the clock structure. >> >> * @clk_sec: pointer to the clock structure for accessing the base_second. >> >> + * @sclk: pointer to the clock structure for accessing the tmu special clock. >> >> * @temp_error1: fused value of the first point trim. >> >> * @temp_error2: fused value of the second point trim. >> >> * @regulator: pointer to the TMU regulator structure. >> >> @@ -144,10 +147,11 @@ struct exynos_tmu_data { >> >> void __iomem *base; >> >> void __iomem *base_second; >> >> int irq; >> >> + bool needs_sclk; >> >> enum soc_type soc; >> >> struct work_struct irq_work; >> >> struct mutex lock; >> >> - struct clk *clk, *clk_sec; >> >> + struct clk *clk, *clk_sec, *sclk; >> >> u8 temp_error1, temp_error2; >> >> struct regulator *regulator; >> >> struct thermal_sensor_conf *reg_conf; >> >> @@ -883,10 +887,24 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> >> goto err_clk_sec; >> >> } >> >> >> >> + if (data->needs_sclk) { >> > >> > Based on the trend we see from Bartlomiej's and Lukasz' works, you >> > should be asking for SoC version, not adding a flag. Can you please >> > crosscheck with them? >> >> I planned to populate this flag as true for Exynos7 in >> exynos_map_dt_data() where other soc specific methods are being setup. > > Well, that I wouldn't expect different, otherwise how your code is > supposed to work, right? yes :) > >> >> Bartlomiej/Lukasz can you kindly comment on if you would prefer the >> check to be based on the SoC version. >> > > > Have a look on how Bartz has removed the flag based code in my -linus > branch. Here is an example: > https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git/commit/?h=linus&id=ef3f80fc7f79c32a1b015afcbffce2a2630011a4 OK, I see what you mean. I'll wait for Bartlomiej and Lukasz to weigh in as well. If they are in favor of using the SoC version then I will fold this into the patch adding support for Exynos7 (to be posted after all of Lukasz' patches are in) Thanks, Abhilash > >> Regards, >> Abhilash >> > >> > Cheers, >> > >> > Eduardo Valentin >> > >> >> + data->sclk = devm_clk_get(&pdev->dev, "sclk"); >> >> + if (IS_ERR(data->sclk)) { >> >> + dev_err(&pdev->dev, "Failed to get sclk\n"); >> >> + goto err_clk; >> >> + } else { >> >> + ret = clk_prepare_enable(data->sclk); >> >> + if (ret) { >> >> + dev_err(&pdev->dev, "Failed to enable sclk\n"); >> >> + goto err_clk; >> >> + } >> >> + } >> >> + } >> >> + >> >> ret = exynos_tmu_initialize(pdev); >> >> if (ret) { >> >> dev_err(&pdev->dev, "Failed to initialize TMU\n"); >> >> - goto err_clk; >> >> + goto err_sclk; >> >> } >> >> >> >> exynos_tmu_control(pdev, true); >> >> @@ -896,7 +914,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> >> sizeof(struct thermal_sensor_conf), GFP_KERNEL); >> >> if (!sensor_conf) { >> >> ret = -ENOMEM; >> >> - goto err_clk; >> >> + goto err_sclk; >> >> } >> >> sprintf(sensor_conf->name, "therm_zone%d", data->id); >> >> sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; >> >> @@ -928,7 +946,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> >> ret = exynos_register_thermal(sensor_conf); >> >> if (ret) { >> >> dev_err(&pdev->dev, "Failed to register thermal interface\n"); >> >> - goto err_clk; >> >> + goto err_sclk; >> >> } >> >> data->reg_conf = sensor_conf; >> >> >> >> @@ -936,10 +954,12 @@ static int exynos_tmu_probe(struct platform_device *pdev) >> >> IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); >> >> if (ret) { >> >> dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); >> >> - goto err_clk; >> >> + goto err_sclk; >> >> } >> >> >> >> return 0; >> >> +err_sclk: >> >> + clk_disable_unprepare(data->sclk); >> >> err_clk: >> >> clk_unprepare(data->clk); >> >> err_clk_sec: >> >> @@ -956,6 +976,7 @@ static int exynos_tmu_remove(struct platform_device *pdev) >> >> >> >> exynos_tmu_control(pdev, false); >> >> >> >> + clk_disable_unprepare(data->sclk); >> >> clk_unprepare(data->clk); >> >> if (!IS_ERR(data->clk_sec)) >> >> clk_unprepare(data->clk_sec); >> >> -- >> >> 1.7.9.5 >> >> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] thermal: exynos: add special clock support 2014-11-26 15:31 ` Abhilash Kesavan @ 2014-12-03 12:26 ` Abhilash Kesavan 0 siblings, 0 replies; 6+ messages in thread From: Abhilash Kesavan @ 2014-12-03 12:26 UTC (permalink / raw) To: Eduardo Valentin Cc: Zhang Rui, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Bartlomiej Zolnierkiewicz, Amit Kachhap, Lukasz Majewski, 최찬우 Hi Bartlomiej and Lukasz, On Wed, Nov 26, 2014 at 9:01 PM, Abhilash Kesavan <kesavan.abhilash@gmail.com> wrote: > Hi Eduardo, > > On Wed, Nov 26, 2014 at 8:44 PM, Eduardo Valentin <edubezval@gmail.com> wrote: >> Abhilash, >> >> On Wed, Nov 26, 2014 at 08:34:19PM +0530, Abhilash Kesavan wrote: >>> Hi Eduardo, >>> >>> On Wed, Nov 26, 2014 at 8:15 PM, Eduardo Valentin <edubezval@gmail.com> wrote: >>> > >>> > Abhilash, >>> > >>> > On Wed, Nov 26, 2014 at 06:21:10AM +0530, Abhilash Kesavan wrote: >>> >> Exynos7 has a special clock required for the functional operation >>> >> of the TMU that is not present in earlier SoCs. Add support for >>> >> this clock and update the binding documentation. >>> >> >>> >> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> >>> >> --- >>> >> Changes since v1: >>> >> - Added a per-soc flag to indicate the presence of special clock >>> >> - Changed the name of special clock from "tmu_sclk" to "sclk" >>> >> - Fixed the error handling for sclk >>> >> >>> >> Tested on 5420 and 5800 based chromebooks, no change in existing behavior. >>> >> >>> >> .../devicetree/bindings/thermal/exynos-thermal.txt | 3 ++ >>> >> drivers/thermal/samsung/exynos_tmu.c | 31 ++++++++++++++++---- >>> >> 2 files changed, 29 insertions(+), 5 deletions(-) >>> >> >>> >> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >>> >> index ae738f5..acf4705 100644 >>> >> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >>> >> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt >>> >> @@ -32,10 +32,13 @@ >>> >> - clocks : The main clocks for TMU device >>> >> -- 1. operational clock for TMU channel >>> >> -- 2. optional clock to access the shared registers of TMU channel >>> >> + -- 3. optional special clock for functional operation >>> >> - clock-names : Thermal system clock name >>> >> -- "tmu_apbif" operational clock for current TMU channel >>> >> -- "tmu_triminfo_apbif" clock to access the shared triminfo register >>> >> for current TMU channel >>> >> + -- "sclk" clock for functional operation of the current TMU >>> >> + channel >>> >> - vtmu-supply: This entry is optional and provides the regulator node supplying >>> >> voltage to TMU. If needed this entry can be placed inside >>> >> board/platform specific dts file. >>> >> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c >>> >> index d44d91d..8ed8409 100644 >>> >> --- a/drivers/thermal/samsung/exynos_tmu.c >>> >> +++ b/drivers/thermal/samsung/exynos_tmu.c >>> >> @@ -123,11 +123,14 @@ >>> >> * @base: base address of the single instance of the TMU controller. >>> >> * @base_second: base address of the common registers of the TMU controller. >>> >> * @irq: irq number of the TMU controller. >>> >> + * @needs_sclk: SoC specific flag indicating that sclk is required for >>> >> + functional operation of the TMU controller. >>> >> * @soc: id of the SOC type. >>> >> * @irq_work: pointer to the irq work structure. >>> >> * @lock: lock to implement synchronization. >>> >> * @clk: pointer to the clock structure. >>> >> * @clk_sec: pointer to the clock structure for accessing the base_second. >>> >> + * @sclk: pointer to the clock structure for accessing the tmu special clock. >>> >> * @temp_error1: fused value of the first point trim. >>> >> * @temp_error2: fused value of the second point trim. >>> >> * @regulator: pointer to the TMU regulator structure. >>> >> @@ -144,10 +147,11 @@ struct exynos_tmu_data { >>> >> void __iomem *base; >>> >> void __iomem *base_second; >>> >> int irq; >>> >> + bool needs_sclk; >>> >> enum soc_type soc; >>> >> struct work_struct irq_work; >>> >> struct mutex lock; >>> >> - struct clk *clk, *clk_sec; >>> >> + struct clk *clk, *clk_sec, *sclk; >>> >> u8 temp_error1, temp_error2; >>> >> struct regulator *regulator; >>> >> struct thermal_sensor_conf *reg_conf; >>> >> @@ -883,10 +887,24 @@ static int exynos_tmu_probe(struct platform_device *pdev) >>> >> goto err_clk_sec; >>> >> } >>> >> >>> >> + if (data->needs_sclk) { >>> > >>> > Based on the trend we see from Bartlomiej's and Lukasz' works, you >>> > should be asking for SoC version, not adding a flag. Can you please >>> > crosscheck with them? >>> >>> I planned to populate this flag as true for Exynos7 in >>> exynos_map_dt_data() where other soc specific methods are being setup. >> >> Well, that I wouldn't expect different, otherwise how your code is >> supposed to work, right? > > yes :) > >> >>> >>> Bartlomiej/Lukasz can you kindly comment on if you would prefer the >>> check to be based on the SoC version. >>> >> >> >> Have a look on how Bartz has removed the flag based code in my -linus >> branch. Here is an example: >> https://git.kernel.org/cgit/linux/kernel/git/evalenti/linux-soc-thermal.git/commit/?h=linus&id=ef3f80fc7f79c32a1b015afcbffce2a2630011a4 > > OK, I see what you mean. I'll wait for Bartlomiej and Lukasz to weigh > in as well. If they are in favor of using the SoC version then I will > fold this into the patch adding support for Exynos7 (to be posted > after all of Lukasz' patches are in) Can you comment on the preffered approach ? Thanks, Abhilash > > Thanks, > Abhilash >> >>> Regards, >>> Abhilash >>> > >>> > Cheers, >>> > >>> > Eduardo Valentin >>> > >>> >> + data->sclk = devm_clk_get(&pdev->dev, "sclk"); >>> >> + if (IS_ERR(data->sclk)) { >>> >> + dev_err(&pdev->dev, "Failed to get sclk\n"); >>> >> + goto err_clk; >>> >> + } else { >>> >> + ret = clk_prepare_enable(data->sclk); >>> >> + if (ret) { >>> >> + dev_err(&pdev->dev, "Failed to enable sclk\n"); >>> >> + goto err_clk; >>> >> + } >>> >> + } >>> >> + } >>> >> + >>> >> ret = exynos_tmu_initialize(pdev); >>> >> if (ret) { >>> >> dev_err(&pdev->dev, "Failed to initialize TMU\n"); >>> >> - goto err_clk; >>> >> + goto err_sclk; >>> >> } >>> >> >>> >> exynos_tmu_control(pdev, true); >>> >> @@ -896,7 +914,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) >>> >> sizeof(struct thermal_sensor_conf), GFP_KERNEL); >>> >> if (!sensor_conf) { >>> >> ret = -ENOMEM; >>> >> - goto err_clk; >>> >> + goto err_sclk; >>> >> } >>> >> sprintf(sensor_conf->name, "therm_zone%d", data->id); >>> >> sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read; >>> >> @@ -928,7 +946,7 @@ static int exynos_tmu_probe(struct platform_device *pdev) >>> >> ret = exynos_register_thermal(sensor_conf); >>> >> if (ret) { >>> >> dev_err(&pdev->dev, "Failed to register thermal interface\n"); >>> >> - goto err_clk; >>> >> + goto err_sclk; >>> >> } >>> >> data->reg_conf = sensor_conf; >>> >> >>> >> @@ -936,10 +954,12 @@ static int exynos_tmu_probe(struct platform_device *pdev) >>> >> IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data); >>> >> if (ret) { >>> >> dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq); >>> >> - goto err_clk; >>> >> + goto err_sclk; >>> >> } >>> >> >>> >> return 0; >>> >> +err_sclk: >>> >> + clk_disable_unprepare(data->sclk); >>> >> err_clk: >>> >> clk_unprepare(data->clk); >>> >> err_clk_sec: >>> >> @@ -956,6 +976,7 @@ static int exynos_tmu_remove(struct platform_device *pdev) >>> >> >>> >> exynos_tmu_control(pdev, false); >>> >> >>> >> + clk_disable_unprepare(data->sclk); >>> >> clk_unprepare(data->clk); >>> >> if (!IS_ERR(data->clk_sec)) >>> >> clk_unprepare(data->clk_sec); >>> >> -- >>> >> 1.7.9.5 >>> >> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-12-03 12:26 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-11-26 0:51 [PATCH v2] thermal: exynos: add special clock support Abhilash Kesavan 2014-11-26 14:45 ` Eduardo Valentin 2014-11-26 15:04 ` Abhilash Kesavan 2014-11-26 15:14 ` Eduardo Valentin 2014-11-26 15:31 ` Abhilash Kesavan 2014-12-03 12:26 ` Abhilash Kesavan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).