Re: [PATCH] cleanup ti-soc-thermal

[Nishanth Menon <nm@ti.com>]

On 12:19-20150103, Pavel Machek wrote:
> Simplify code by removing goto's where they point to simple return.
> 
> Avoid confusing |= on error values.

Please split these up into chunks of related changes. there is white
space and quiet a few other changes all mixed in.

Also please cc linux-omap mailing list as well to get adequate audience.

> 
> Correct whitespace.
> 
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
> 
> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> index 634b6ce..3b4e72f 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
> @@ -263,18 +264,13 @@ static
>  int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
>  {
>  	const struct ti_bandgap_data *conf = bgp->conf;
> -	int ret = 0;
>  
>  	/* look up for temperature in the table and return the temperature */
> -	if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val) {
> -		ret = -ERANGE;
> -		goto exit;
> -	}
> +	if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val)
> +		return -ERANGE;
>  
>  	*t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
> -
> -exit:
> -	return ret;
> +	return 0;
>  }
>  
>  /**
> @@ -295,16 +291,14 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
>  {
>  	const struct ti_bandgap_data *conf = bgp->conf;
>  	const int *conv_table = bgp->conf->conv_table;
> -	int high, low, mid, ret = 0;
> +	int high, low, mid;
>  
>  	low = 0;
>  	high = conf->adc_end_val - conf->adc_start_val;
>  	mid = (high + low) / 2;
>  
> -	if (temp < conv_table[low] || temp > conv_table[high]) {
> -		ret = -ERANGE;
> -		goto exit;
> -	}
> +	if (temp < conv_table[low] || temp > conv_table[high])
> +		return -ERANGE;
>  
>  	while (low < high) {
>  		if (temp < conv_table[mid])
> @@ -315,9 +309,7 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
>  	}
>  
>  	*adc = conf->adc_start_val + low;
> -
> -exit:
> -	return ret;
> +	return 0;
>  }
>  
>  /**
> @@ -343,13 +335,11 @@ int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
>  	 */
>  	ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
>  	if (ret < 0)
> -		goto exit;
> +		return ret;
>  
>  	temp += hyst_val;
>  
>  	ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
> -
> -exit:
>  	return ret;
>  }
>  
> @@ -468,22 +458,18 @@ exit:
>   */
>  static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
>  {
> -	int ret = 0;
> -
>  	if (!bgp || IS_ERR(bgp)) {
>  		pr_err("%s: invalid bandgap pointer\n", __func__);
> -		ret = -EINVAL;
> -		goto exit;
> +		return -EINVAL;
>  	}
>  
>  	if ((id < 0) || (id >= bgp->conf->sensor_count)) {
>  		dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
>  			__func__, id);
> -		ret = -ERANGE;
> +		return -ERANGE;
>  	}
>  
> -exit:
> -	return ret;
> +	return 0;
>  }
>  
>  /**
> @@ -511,12 +497,10 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
>  
>  	ret = ti_bandgap_validate(bgp, id);
>  	if (ret)
> -		goto exit;
> +		return ret;
>  
> -	if (!TI_BANDGAP_HAS(bgp, TALERT)) {
> -		ret = -ENOTSUPP;
> -		goto exit;
> -	}
> +	if (!TI_BANDGAP_HAS(bgp, TALERT))
> +		return -ENOTSUPP;
>  
>  	ts_data = bgp->conf->sensors[id].ts_data;
>  	tsr = bgp->conf->sensors[id].registers;
> @@ -529,17 +513,15 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
>  	}
>  
>  	if (ret)
> -		goto exit;
> +		return ret;
>  
>  	ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
>  	if (ret < 0)
> -		goto exit;
> +		return ret;
>  
>  	spin_lock(&bgp->lock);
>  	ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
>  	spin_unlock(&bgp->lock);
> -
> -exit:
>  	return ret;
>  }
>  
> @@ -582,7 +564,7 @@ static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
>  
>  	temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
>  	temp = (temp & mask) >> __ffs(mask);
> -	ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
> +	ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
>  	if (ret) {
>  		dev_err(bgp->dev, "failed to read thot\n");
>  		ret = -EIO;
> @@ -1220,11 +1222,10 @@ int ti_bandgap_probe(struct platform_device *pdev)
>  		goto free_irqs;
>  	}
>  
> -	bgp->div_clk = clk_get(NULL,  bgp->conf->div_ck_name);
> +	bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
>  	ret = IS_ERR(bgp->div_clk);
>  	if (ret) {
> -		dev_err(&pdev->dev,
> -			"failed to request div_ts_ck clock ref\n");
> +		dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n");
>  		ret = PTR_ERR(bgp->div_clk);
>  		goto free_irqs;
>  	}
> diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> index 5fd0386..c62a6de 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> @@ -76,7 +76,7 @@ static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
>  }
>  
>  /* thermal zone ops */
> -/* Get temperature callback function for thermal zone*/
> +/* Get temperature callback function for thermal zone */
>  static inline int __ti_thermal_get_temp(void *devdata, long *temp)
>  {
>  	struct thermal_zone_device *pcb_tz = NULL;
> 
> -- 
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Regards,
Nishanth Menon