From: Todd E Brandt <todd.e.brandt@linux.intel.com>
To: linux-pm@vger.kernel.org, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: jacob.jun.pan@linux.intel.com, sameo@linux.intel.com,
lee.jones@linaro.org, sre@kernel.org, dbaryshkov@gmail.com,
dwmw2@infradead.org, david.woodhouse@intel.com,
todd.e.brandt@intel.com
Subject: [PATCH 2/3] mfd/axp20x: add support for fuel gauge cell driver
Date: Wed, 7 Jan 2015 13:25:52 -0800 [thread overview]
Message-ID: <20150107212552.GC3440@linux.intel.com> (raw)
mfd/axp20x: add support for fuel gauge cell
Register definitions and platform data structure
for fuel gauge cell devices.
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
----
include/linux/mfd/axp20x.h | 43 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 41 insertions(+), 2 deletions(-)
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 81589d1..dfabd6d 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -124,10 +124,27 @@ enum {
#define AXP288_PMIC_ADC_H 0x56
#define AXP288_PMIC_ADC_L 0x57
#define AXP288_ADC_TS_PIN_CTRL 0x84
-
#define AXP288_PMIC_ADC_EN 0x84
-#define AXP288_FG_TUNE5 0xed
+/* Fuel Gauge */
+#define AXP288_FG_RDC1_REG 0xba
+#define AXP288_FG_RDC0_REG 0xbb
+#define AXP288_FG_OCVH_REG 0xbc
+#define AXP288_FG_OCVL_REG 0xbd
+#define AXP288_FG_OCV_CURVE_REG 0xc0
+#define AXP288_FG_DES_CAP1_REG 0xe0
+#define AXP288_FG_DES_CAP0_REG 0xe1
+#define AXP288_FG_CC_MTR1_REG 0xe2
+#define AXP288_FG_CC_MTR0_REG 0xe3
+#define AXP288_FG_OCV_CAP_REG 0xe4
+#define AXP288_FG_CC_CAP_REG 0xe5
+#define AXP288_FG_LOW_CAP_REG 0xe6
+#define AXP288_FG_TUNE0 0xe8
+#define AXP288_FG_TUNE1 0xe9
+#define AXP288_FG_TUNE2 0xea
+#define AXP288_FG_TUNE3 0xeb
+#define AXP288_FG_TUNE4 0xec
+#define AXP288_FG_TUNE5 0xed
/* Regulators IDs */
enum {
@@ -236,4 +253,26 @@ struct axp20x_dev {
const struct regmap_irq_chip *regmap_irq_chip;
};
+#define BATTID_LEN 64
+#define OCV_CURVE_SIZE 32
+#define MAX_THERM_CURVE_SIZE 25
+#define PD_DEF_MIN_TEMP 0
+#define PD_DEF_MAX_TEMP 55
+
+struct axp20x_fg_pdata {
+ char battid[BATTID_LEN + 1];
+ int design_cap;
+ int min_volt;
+ int max_volt;
+ int max_temp;
+ int min_temp;
+ int cap1;
+ int cap0;
+ int rdc1;
+ int rdc0;
+ int ocv_curve[OCV_CURVE_SIZE];
+ int tcsz;
+ int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
+};
+
#endif /* __LINUX_MFD_AXP20X_H */
next reply other threads:[~2015-01-07 21:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-07 21:25 Todd E Brandt [this message]
[not found] ` <20150107212552.GC3440-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2015-01-08 1:05 ` [PATCH 2/3] mfd/axp20x: add support for fuel gauge cell driver Jacob Pan
2015-01-20 11:49 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150107212552.GC3440@linux.intel.com \
--to=todd.e.brandt@linux.intel.com \
--cc=david.woodhouse@intel.com \
--cc=dbaryshkov@gmail.com \
--cc=dwmw2@infradead.org \
--cc=jacob.jun.pan@linux.intel.com \
--cc=lee.jones@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=sre@kernel.org \
--cc=todd.e.brandt@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).