Re: [PATCH v3 00/16] thermal: exynos: Thermal code rework to use device tree

[Lukasz Majewski <l.majewski@samsung.com>]

Hi Tobias,

> Hello!
> 
> Lukasz Majewski wrote:
> > We all know that this code is floating around - early version of
> > this work was posted in the Q3 2013.
> > 
> > To be fair - this code is both needed and welcome, but new problems
> > with it are found (please search for recent comment from Kevin
> > Hilman).
> > 
> > From my side, I focus on the code which is in Eduardo Valentin's
> > next (3.19-rc3), since I don't know when and if eventually cpufreq
> > rework would be merged.
> I'm sorry, my wording wasn't the best here. I'm not critizing the work
> done here, merely voicing my concern (and also interest!) about how
> the new stuff interacts with code that may eventually get merged.
> You're aware of it, that's enough for me to know.

I'm aware of Thomas work and probably will integrate it when finally it
is merged.

> 
> 
> > The code which touches exynos-cpufreq.c is around 30 LOC, only for
> > preserving cpu cooling functionality.
> > 
> > Is it worth to wait for code developed for so long to happily apply
> > 30 LOC and delay removal of around 400 LOC in other subsystem
> > (thermal)?
> No, of course not. That was pretty stupid of me :(
> 
> 
> > I rise my hand as a volunteer to fix any thermal related issues
> > which show up after cpufreq rework code applying to Exynos.
> That's certainly good to hear!
> 
> 
> > This series is NOT providing any NEW functionality. It in fact
> > preserves functionality, which allows using CPU frequency as a mean
> > to cool the device.
> I've got a question concerning this. Is this only needed for
> exynos-cpufreq, or does cpufreq-dt also need something like that.

In the __cpufreq_add_dev() you have cpufreq_driver->ready() callback
which in the cpufreq-dt.c has call to of_cpufreq_cooling_register().

It seems like cpufreq-dt is ready for handling cpu cooling devices.

> 
> The point is that I'm still working with a rather old version of the
> cpufreq series, a version which still had the Exynos4x12 code in it
> (this was removed later, if I remember correctly because of problems
> with how to properly describe boost configuration in DT).

Is your board Odroid-U3/Trats2 ?

> 
> 
> Anyway, to not get completly off-topic here, I noticed some small
> issue with v3 of the thermal series. I've enabled
> CONFIG_THERMAL_HWMON so that I can use lm_sensors to query
> temperature of the board. However while the thermal_zone is created,
> there is no hwmon node to be found. 

I'm not surprised, that some use cases (about which I wasn't even
aware) show up. 
I've already fixed issues reported by Abhilash (with v5 and a following
patch) and look closer into the THERMAL_HWMON.

I've also done some work regarding FAN controlled by hwmon for Odroid
U3.
Could you look on following series:
http://www.spinics.net/lists/linux-samsung-soc/msg40471.html

I can only guess that your board might need similar entries for your
DTS file(s).

> This was working properly without
> the thermal series.

Thanks for testing the patch set :-)

> 
> 
> With best wishes,
> Tobias
> 



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group