Re: [PATCH v5 15/18] thermal: samsung: core: Exynos TMU rework to use device tree for configuration

[Eduardo Valentin <edubezval@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 27458 bytes --]

On Mon, Jan 19, 2015 at 12:20:59PM +0100, Lukasz Majewski wrote:
> This patch brings support for providing configuration via device tree.
> Previously this data has been hardcoded in the exynos_tmu_data.c file.
> Such approach was not scalable and very often required copying the whole
> data.
> 
> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> ---
> Changes for v2:
> - Adjust exynos_tmu.c code to the newest ti-soc-thermal repository
> - Usage of of-thermal.c exported trip points table
> Changes for v3:
> - Adding exynos_of_get_soc_type() method to set SOC type from device's
>   compatible string
> - "samsung,tmu_" prefix for TMU specific properties has been added
> Changes for v4:
> - None
> Changes for v5:
> - Remove duplicated exynos_tmu_initialize() - reported by Abhilash Kesavan
>  <a.kesavan@samsung.com>
> 

several checkpatch.pl items to be reviewed in this patch:
CHECK: No space is necessary after a cast
#509: FILE: drivers/thermal/samsung/exynos_tmu.c:821:
+       pdata->gain = (u8) value;

CHECK: No space is necessary after a cast
#511: FILE: drivers/thermal/samsung/exynos_tmu.c:823:
+       pdata->reference_voltage = (u8) value;


Can you please make sure all of your patches pass:
checkpatch.pl --strict

?


> ---
>  drivers/thermal/samsung/Makefile     |   2 -
>  drivers/thermal/samsung/exynos_tmu.c | 339 ++++++++++++++++++++++-------------
>  drivers/thermal/samsung/exynos_tmu.h |  53 +-----
>  3 files changed, 220 insertions(+), 174 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
> index c09d830..1e47d0d 100644
> --- a/drivers/thermal/samsung/Makefile
> +++ b/drivers/thermal/samsung/Makefile
> @@ -3,5 +3,3 @@
>  #
>  obj-$(CONFIG_EXYNOS_THERMAL)			+= exynos_thermal.o
>  exynos_thermal-y				:= exynos_tmu.o
> -exynos_thermal-y				+= exynos_tmu_data.o
> -exynos_thermal-$(CONFIG_EXYNOS_THERMAL_CORE)	+= exynos_thermal_common.o
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index ae30f6a..9d2d685 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -1,6 +1,10 @@
>  /*
>   * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
>   *
> + *  Copyright (C) 2014 Samsung Electronics
> + *  Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> + *  Lukasz Majewski <l.majewski@samsung.com>
> + *
>   *  Copyright (C) 2011 Samsung Electronics
>   *  Donggeun Kim <dg77.kim@samsung.com>
>   *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
> @@ -31,8 +35,8 @@
>  #include <linux/platform_device.h>
>  #include <linux/regulator/consumer.h>
>  
> -#include "exynos_thermal_common.h"
>  #include "exynos_tmu.h"
> +#include "../thermal_core.h"
>  
>  /* Exynos generic registers */
>  #define EXYNOS_TMU_REG_TRIMINFO		0x0
> @@ -115,6 +119,7 @@
>  #define EXYNOS5440_TMU_TH_RISE4_SHIFT		24
>  #define EXYNOS5440_EFUSE_SWAP_OFFSET		8
>  
> +#define MCELSIUS	1000
>  /**
>   * struct exynos_tmu_data : A structure to hold the private data of the TMU
>  	driver
> @@ -150,7 +155,8 @@ struct exynos_tmu_data {
>  	struct clk *clk, *clk_sec;
>  	u8 temp_error1, temp_error2;
>  	struct regulator *regulator;
> -	struct thermal_sensor_conf *reg_conf;
> +	struct thermal_zone_device *tzd;
> +
>  	int (*tmu_initialize)(struct platform_device *pdev);
>  	void (*tmu_control)(struct platform_device *pdev, bool on);
>  	int (*tmu_read)(struct exynos_tmu_data *data);
> @@ -159,6 +165,33 @@ struct exynos_tmu_data {
>  	void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
>  };
>  
> +static void exynos_report_trigger(struct exynos_tmu_data *p)
> +{
> +	char data[10], *envp[] = { data, NULL };
> +	struct thermal_zone_device *tz = p->tzd;
> +	unsigned long temp;
> +	unsigned int i;
> +
> +	if (!p) {
> +		pr_err("Wrong temperature configuration data\n");
> +		return;
> +	}
> +
> +	thermal_zone_device_update(tz);
> +
> +	mutex_lock(&tz->lock);
> +	/* Find the level for which trip happened */
> +	for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
> +		tz->ops->get_trip_temp(tz, i, &temp);
> +		if (tz->last_temperature < temp)
> +			break;
> +	}
> +
> +	snprintf(data, sizeof(data), "%u", i);
> +	kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp);
> +	mutex_unlock(&tz->lock);
> +}
> +
>  /*
>   * TMU treats temperature as a mapped temperature code.
>   * The temperature is converted differently depending on the calibration type.
> @@ -234,14 +267,25 @@ static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
>  
>  static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling)
>  {
> -	struct exynos_tmu_platform_data *pdata = data->pdata;
> +	struct thermal_zone_device *tz = data->tzd;
> +	const struct thermal_trip * const trips =
> +		of_thermal_get_trip_points(tz);
> +	unsigned long temp;
>  	int i;
>  
> -	for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
> -		u8 temp = pdata->trigger_levels[i];
> +	if (!trips) {
> +		pr_err("%s: Cannot get trip points from of-thermal.c!\n",
> +		       __func__);
> +		return 0;
> +	}
>  
> +	for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
> +		if (trips[i].type == THERMAL_TRIP_CRITICAL)
> +			continue;
> +
> +		temp = trips[i].temperature / MCELSIUS;
>  		if (falling)
> -			temp -= pdata->threshold_falling;
> +			temp -= (trips[i].hysteresis / MCELSIUS);
>  		else
>  			threshold &= ~(0xff << 8 * i);
>  
> @@ -305,9 +349,19 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
>  static int exynos4210_tmu_initialize(struct platform_device *pdev)
>  {
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> -	struct exynos_tmu_platform_data *pdata = data->pdata;
> -	unsigned int status;
> +	struct thermal_zone_device *tz = data->tzd;
> +	const struct thermal_trip * const trips =
> +		of_thermal_get_trip_points(tz);
>  	int ret = 0, threshold_code, i;
> +	unsigned long reference, temp;
> +	unsigned int status;
> +
> +	if (!trips) {
> +		pr_err("%s: Cannot get trip points from of-thermal.c!\n",
> +		       __func__);
> +		ret = -ENODEV;
> +		goto out;
> +	}
>  
>  	status = readb(data->base + EXYNOS_TMU_REG_STATUS);
>  	if (!status) {
> @@ -318,12 +372,19 @@ static int exynos4210_tmu_initialize(struct platform_device *pdev)
>  	sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
>  
>  	/* Write temperature code for threshold */
> -	threshold_code = temp_to_code(data, pdata->threshold);
> +	reference = trips[0].temperature / MCELSIUS;
> +	threshold_code = temp_to_code(data, reference);
> +	if (threshold_code < 0) {
> +		ret = threshold_code;
> +		goto out;
> +	}
>  	writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
>  
> -	for (i = 0; i < pdata->non_hw_trigger_levels; i++)
> -		writeb(pdata->trigger_levels[i], data->base +
> +	for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
> +		temp = trips[i].temperature / MCELSIUS;
> +		writeb(temp - reference, data->base +
>  		       EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
> +	}
>  
>  	data->tmu_clear_irqs(data);
>  out:
> @@ -333,9 +394,11 @@ out:
>  static int exynos4412_tmu_initialize(struct platform_device *pdev)
>  {
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> -	struct exynos_tmu_platform_data *pdata = data->pdata;
> +	const struct thermal_trip * const trips =
> +		of_thermal_get_trip_points(data->tzd);
>  	unsigned int status, trim_info, con, ctrl, rising_threshold;
>  	int ret = 0, threshold_code, i;
> +	unsigned long crit_temp = 0;
>  
>  	status = readb(data->base + EXYNOS_TMU_REG_STATUS);
>  	if (!status) {
> @@ -373,17 +436,29 @@ static int exynos4412_tmu_initialize(struct platform_device *pdev)
>  	data->tmu_clear_irqs(data);
>  
>  	/* if last threshold limit is also present */
> -	i = pdata->max_trigger_level - 1;
> -	if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) {
> -		threshold_code = temp_to_code(data, pdata->trigger_levels[i]);
> -		/* 1-4 level to be assigned in th0 reg */
> -		rising_threshold &= ~(0xff << 8 * i);
> -		rising_threshold |= threshold_code << 8 * i;
> -		writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
> -		con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
> -		con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
> -		writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
> +	for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) {
> +		if (trips[i].type == THERMAL_TRIP_CRITICAL) {
> +			crit_temp = trips[i].temperature;
> +			break;
> +		}
> +	}
> +
> +	if (i == of_thermal_get_ntrips(data->tzd)) {
> +		pr_err("%s: No CRITICAL trip point defined at of-thermal.c!\n",
> +		       __func__);
> +		ret = -EINVAL;
> +		goto out;
>  	}
> +
> +	threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
> +	/* 1-4 level to be assigned in th0 reg */
> +	rising_threshold &= ~(0xff << 8 * i);
> +	rising_threshold |= threshold_code << 8 * i;
> +	writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
> +	con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
> +	con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
> +	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
> +
>  out:
>  	return ret;
>  }
> @@ -391,9 +466,9 @@ out:
>  static int exynos5440_tmu_initialize(struct platform_device *pdev)
>  {
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> -	struct exynos_tmu_platform_data *pdata = data->pdata;
>  	unsigned int trim_info = 0, con, rising_threshold;
> -	int ret = 0, threshold_code, i;
> +	int ret = 0, threshold_code;
> +	unsigned long crit_temp = 0;
>  
>  	/*
>  	 * For exynos5440 soc triminfo value is swapped between TMU0 and
> @@ -422,9 +497,8 @@ static int exynos5440_tmu_initialize(struct platform_device *pdev)
>  	data->tmu_clear_irqs(data);
>  
>  	/* if last threshold limit is also present */
> -	i = pdata->max_trigger_level - 1;
> -	if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) {
> -		threshold_code = temp_to_code(data, pdata->trigger_levels[i]);
> +	if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp)) {
> +		threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
>  		/* 5th level to be assigned in th2 reg */
>  		rising_threshold =
>  			threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
> @@ -442,7 +516,7 @@ static int exynos5440_tmu_initialize(struct platform_device *pdev)
>  static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
>  {
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> -	struct exynos_tmu_platform_data *pdata = data->pdata;
> +	struct thermal_zone_device *tz = data->tzd;
>  	unsigned int con, interrupt_en;
>  
>  	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
> @@ -450,10 +524,15 @@ static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
>  	if (on) {
>  		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
>  		interrupt_en =
> -			pdata->trigger_enable[3] << EXYNOS_TMU_INTEN_RISE3_SHIFT |
> -			pdata->trigger_enable[2] << EXYNOS_TMU_INTEN_RISE2_SHIFT |
> -			pdata->trigger_enable[1] << EXYNOS_TMU_INTEN_RISE1_SHIFT |
> -			pdata->trigger_enable[0] << EXYNOS_TMU_INTEN_RISE0_SHIFT;
> +			(of_thermal_is_trip_valid(tz, 3)
> +			 << EXYNOS_TMU_INTEN_RISE3_SHIFT) |
> +			(of_thermal_is_trip_valid(tz, 2)
> +			 << EXYNOS_TMU_INTEN_RISE2_SHIFT) |
> +			(of_thermal_is_trip_valid(tz, 1)
> +			 << EXYNOS_TMU_INTEN_RISE1_SHIFT) |
> +			(of_thermal_is_trip_valid(tz, 0)
> +			 << EXYNOS_TMU_INTEN_RISE0_SHIFT);
> +
>  		if (data->soc != SOC_ARCH_EXYNOS4210)
>  			interrupt_en |=
>  				interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
> @@ -468,7 +547,7 @@ static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
>  static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
>  {
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> -	struct exynos_tmu_platform_data *pdata = data->pdata;
> +	struct thermal_zone_device *tz = data->tzd;
>  	unsigned int con, interrupt_en;
>  
>  	con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL));
> @@ -476,11 +555,16 @@ static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
>  	if (on) {
>  		con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
>  		interrupt_en =
> -			pdata->trigger_enable[3] << EXYNOS5440_TMU_INTEN_RISE3_SHIFT |
> -			pdata->trigger_enable[2] << EXYNOS5440_TMU_INTEN_RISE2_SHIFT |
> -			pdata->trigger_enable[1] << EXYNOS5440_TMU_INTEN_RISE1_SHIFT |
> -			pdata->trigger_enable[0] << EXYNOS5440_TMU_INTEN_RISE0_SHIFT;
> -		interrupt_en |= interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
> +			(of_thermal_is_trip_valid(tz, 3)
> +			 << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) |
> +			(of_thermal_is_trip_valid(tz, 2)
> +			 << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) |
> +			(of_thermal_is_trip_valid(tz, 1)
> +			 << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) |
> +			(of_thermal_is_trip_valid(tz, 0)
> +			 << EXYNOS5440_TMU_INTEN_RISE0_SHIFT);
> +		interrupt_en |=
> +			interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
>  	} else {
>  		con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
>  		interrupt_en = 0; /* Disable all interrupts */
> @@ -489,19 +573,22 @@ static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
>  	writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
>  }
>  
> -static int exynos_tmu_read(struct exynos_tmu_data *data)
> +int exynos_get_temp(void *p, long *temp)
>  {
> -	int ret;
> +	struct exynos_tmu_data *data = p;
> +
> +	if (!data)
> +		return -EINVAL;
>  
>  	mutex_lock(&data->lock);
>  	clk_enable(data->clk);
> -	ret = data->tmu_read(data);
> -	if (ret >= 0)
> -		ret = code_to_temp(data, ret);
> +
> +	*temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS;
> +
>  	clk_disable(data->clk);
>  	mutex_unlock(&data->lock);
>  
> -	return ret;
> +	return 0;
>  }
>  
>  #ifdef CONFIG_THERMAL_EMULATION
> @@ -613,7 +700,7 @@ static void exynos_tmu_work(struct work_struct *work)
>  	if (!IS_ERR(data->clk_sec))
>  		clk_disable(data->clk_sec);
>  
> -	exynos_report_trigger(data->reg_conf);
> +	exynos_report_trigger(data);
>  	mutex_lock(&data->lock);
>  	clk_enable(data->clk);
>  
> @@ -673,55 +760,89 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
>  static const struct of_device_id exynos_tmu_match[] = {
>  	{
>  		.compatible = "samsung,exynos3250-tmu",
> -		.data = &exynos3250_default_tmu_data,
>  	},
>  	{
>  		.compatible = "samsung,exynos4210-tmu",
> -		.data = &exynos4210_default_tmu_data,
>  	},
>  	{
>  		.compatible = "samsung,exynos4412-tmu",
> -		.data = &exynos4412_default_tmu_data,
>  	},
>  	{
>  		.compatible = "samsung,exynos5250-tmu",
> -		.data = &exynos5250_default_tmu_data,
>  	},
>  	{
>  		.compatible = "samsung,exynos5260-tmu",
> -		.data = &exynos5260_default_tmu_data,
>  	},
>  	{
>  		.compatible = "samsung,exynos5420-tmu",
> -		.data = &exynos5420_default_tmu_data,
>  	},
>  	{
>  		.compatible = "samsung,exynos5420-tmu-ext-triminfo",
> -		.data = &exynos5420_default_tmu_data,
>  	},
>  	{
>  		.compatible = "samsung,exynos5440-tmu",
> -		.data = &exynos5440_default_tmu_data,
>  	},
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, exynos_tmu_match);
>  
> -static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
> -			struct platform_device *pdev, int id)
> +static int exynos_of_get_soc_type(struct device_node *np)
>  {
> -	struct  exynos_tmu_init_data *data_table;
> -	struct exynos_tmu_platform_data *tmu_data;
> -	const struct of_device_id *match;
> +	if (of_device_is_compatible(np, "samsung,exynos3250-tmu"))
> +		return SOC_ARCH_EXYNOS3250;
> +	else if (of_device_is_compatible(np, "samsung,exynos4210-tmu"))
> +		return SOC_ARCH_EXYNOS4210;
> +	else if (of_device_is_compatible(np, "samsung,exynos4412-tmu"))
> +		return SOC_ARCH_EXYNOS4412;
> +	else if (of_device_is_compatible(np, "samsung,exynos5250-tmu"))
> +		return SOC_ARCH_EXYNOS5250;
> +	else if (of_device_is_compatible(np, "samsung,exynos5260-tmu"))
> +		return SOC_ARCH_EXYNOS5260;
> +	else if (of_device_is_compatible(np, "samsung,exynos5420-tmu"))
> +		return SOC_ARCH_EXYNOS5420;
> +	else if (of_device_is_compatible(np,
> +					 "samsung,exynos5420-tmu-ext-triminfo"))
> +		return SOC_ARCH_EXYNOS5420_TRIMINFO;
> +	else if (of_device_is_compatible(np, "samsung,exynos5440-tmu"))
> +		return SOC_ARCH_EXYNOS5440;
> +
> +	return -EINVAL;
> +}
>  
> -	match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
> -	if (!match)
> -		return NULL;
> -	data_table = (struct exynos_tmu_init_data *) match->data;
> -	if (!data_table || id >= data_table->tmu_count)
> -		return NULL;
> -	tmu_data = data_table->tmu_data;
> -	return (struct exynos_tmu_platform_data *) (tmu_data + id);
> +static int exynos_of_sensor_conf(struct device_node *np,
> +				 struct exynos_tmu_platform_data *pdata)
> +{
> +	u32 value;
> +	int ret;
> +
> +	of_node_get(np);
> +
> +	ret = of_property_read_u32(np, "samsung,tmu_gain", &value);
> +	pdata->gain = (u8) value;
> +	of_property_read_u32(np, "samsung,tmu_reference_voltage", &value);
> +	pdata->reference_voltage = (u8) value;
> +	of_property_read_u32(np, "samsung,tmu_noise_cancel_mode", &value);
> +	pdata->noise_cancel_mode = (u8) value;
> +
> +	of_property_read_u32(np, "samsung,tmu_efuse_value",
> +			     &pdata->efuse_value);
> +	of_property_read_u32(np, "samsung,tmu_min_efuse_value",
> +			     &pdata->min_efuse_value);
> +	of_property_read_u32(np, "samsung,tmu_max_efuse_value",
> +			     &pdata->max_efuse_value);
> +
> +	of_property_read_u32(np, "samsung,tmu_first_point_trim", &value);
> +	pdata->first_point_trim = (u8) value;
> +	of_property_read_u32(np, "samsung,tmu_second_point_trim", &value);
> +	pdata->second_point_trim = (u8) value;
> +	of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value);
> +	pdata->default_temp_offset = (u8) value;
> +
> +	of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type);
> +	of_property_read_u32(np, "samsung,tmu_cal_mode", &pdata->cal_mode);
> +
> +	of_node_put(np);
> +	return 0;
>  }
>  
>  static int exynos_map_dt_data(struct platform_device *pdev)
> @@ -771,14 +892,15 @@ static int exynos_map_dt_data(struct platform_device *pdev)
>  		return -EADDRNOTAVAIL;
>  	}
>  
> -	pdata = exynos_get_driver_data(pdev, data->id);
> -	if (!pdata) {
> -		dev_err(&pdev->dev, "No platform init data supplied.\n");
> -		return -ENODEV;
> -	}
> +	pdata = devm_kzalloc(&pdev->dev,
> +			     sizeof(struct exynos_tmu_platform_data),
> +			     GFP_KERNEL);
> +	if (!pdata)
> +		return -ENOMEM;
>  
> +	exynos_of_sensor_conf(pdev->dev.of_node, pdata);
>  	data->pdata = pdata;
> -	data->soc = pdata->type;
> +	data->soc = exynos_of_get_soc_type(pdev->dev.of_node);
>  
>  	switch (data->soc) {
>  	case SOC_ARCH_EXYNOS4210:
> @@ -834,12 +956,16 @@ static int exynos_map_dt_data(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static struct thermal_zone_of_device_ops exynos_sensor_ops = {
> +	.get_temp = exynos_get_temp,
> +	.set_emul_temp = exynos_tmu_set_emulation,
> +};
> +
>  static int exynos_tmu_probe(struct platform_device *pdev)
>  {
> -	struct exynos_tmu_data *data;
>  	struct exynos_tmu_platform_data *pdata;
> -	struct thermal_sensor_conf *sensor_conf;
> -	int ret, i;
> +	struct exynos_tmu_data *data;
> +	int ret;
>  
>  	data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
>  					GFP_KERNEL);
> @@ -849,9 +975,15 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  	platform_set_drvdata(pdev, data);
>  	mutex_init(&data->lock);
>  
> +	data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, data,
> +						    &exynos_sensor_ops);
> +	if (IS_ERR(data->tzd)) {
> +		pr_err("thermal: tz: %p ERROR\n", data->tzd);
> +		return PTR_ERR(data->tzd);
> +	}
>  	ret = exynos_map_dt_data(pdev);
>  	if (ret)
> -		return ret;
> +		goto err_sensor;
>  
>  	pdata = data->pdata;
>  
> @@ -860,20 +992,22 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  	data->clk = devm_clk_get(&pdev->dev, "tmu_apbif");
>  	if (IS_ERR(data->clk)) {
>  		dev_err(&pdev->dev, "Failed to get clock\n");
> -		return  PTR_ERR(data->clk);
> +		ret = PTR_ERR(data->clk);
> +		goto err_sensor;
>  	}
>  
>  	data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
>  	if (IS_ERR(data->clk_sec)) {
>  		if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
>  			dev_err(&pdev->dev, "Failed to get triminfo clock\n");
> -			return PTR_ERR(data->clk_sec);
> +			ret = PTR_ERR(data->clk_sec);
> +			goto err_sensor;
>  		}
>  	} else {
>  		ret = clk_prepare(data->clk_sec);
>  		if (ret) {
>  			dev_err(&pdev->dev, "Failed to get clock\n");
> -			return ret;
> +			goto err_sensor;
>  		}
>  	}
>  
> @@ -889,45 +1023,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  		goto err_clk;
>  	}
>  
> -	exynos_tmu_control(pdev, true);
> -
> -	/* Allocate a structure to register with the exynos core thermal */
> -	sensor_conf = devm_kzalloc(&pdev->dev,
> -				sizeof(struct thermal_sensor_conf), GFP_KERNEL);
> -	if (!sensor_conf) {
> -		ret = -ENOMEM;
> -		goto err_clk;
> -	}
> -	sprintf(sensor_conf->name, "therm_zone%d", data->id);
> -	sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
> -	sensor_conf->write_emul_temp =
> -		(int (*)(void *, unsigned long))exynos_tmu_set_emulation;
> -	sensor_conf->driver_data = data;
> -	sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
> -			pdata->trigger_enable[1] + pdata->trigger_enable[2]+
> -			pdata->trigger_enable[3];
> -
> -	for (i = 0; i < sensor_conf->trip_data.trip_count; i++) {
> -		sensor_conf->trip_data.trip_val[i] =
> -			pdata->threshold + pdata->trigger_levels[i];
> -		sensor_conf->trip_data.trip_type[i] =
> -					pdata->trigger_type[i];
> -	}
> -
> -	sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
> -
> -	sensor_conf->dev = &pdev->dev;
> -	/* Register the sensor with thermal management interface */
> -	ret = exynos_register_thermal(sensor_conf);
> -	if (ret) {
> -		if (ret != -EPROBE_DEFER)
> -			dev_err(&pdev->dev,
> -				"Failed to register thermal interface: %d\n",
> -				ret);
> -		goto err_clk;
> -	}
> -	data->reg_conf = sensor_conf;
> -
>  	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
>  		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
>  	if (ret) {
> @@ -935,21 +1030,25 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  		goto err_clk;
>  	}
>  
> +	exynos_tmu_control(pdev, true);
>  	return 0;
>  err_clk:
>  	clk_unprepare(data->clk);
>  err_clk_sec:
>  	if (!IS_ERR(data->clk_sec))
>  		clk_unprepare(data->clk_sec);
> +err_sensor:
> +	thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
> +
>  	return ret;
>  }
>  
>  static int exynos_tmu_remove(struct platform_device *pdev)
>  {
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> +	struct thermal_zone_device *tzd = data->tzd;
>  
> -	exynos_unregister_thermal(data->reg_conf);
> -
> +	thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
>  	exynos_tmu_control(pdev, false);
>  
>  	clk_unprepare(data->clk);
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index 627dec9..d876d4c 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -23,8 +23,7 @@
>  #ifndef _EXYNOS_TMU_H
>  #define _EXYNOS_TMU_H
>  #include <linux/cpu_cooling.h>
> -
> -#include "exynos_thermal_common.h"
> +#include <dt-bindings/thermal/thermal_exynos.h>
>  
>  enum soc_type {
>  	SOC_ARCH_EXYNOS3250 = 1,
> @@ -36,38 +35,9 @@ enum soc_type {
>  	SOC_ARCH_EXYNOS5420_TRIMINFO,
>  	SOC_ARCH_EXYNOS5440,
>  };
> -#include <dt-bindings/thermal/thermal_exynos.h>
>  
>  /**
>   * struct exynos_tmu_platform_data
> - * @threshold: basic temperature for generating interrupt
> - *	       25 <= threshold <= 125 [unit: degree Celsius]
> - * @threshold_falling: differntial value for setting threshold
> - *		       of temperature falling interrupt.
> - * @trigger_levels: array for each interrupt levels
> - *	[unit: degree Celsius]
> - *	0: temperature for trigger_level0 interrupt
> - *	   condition for trigger_level0 interrupt:
> - *		current temperature > threshold + trigger_levels[0]
> - *	1: temperature for trigger_level1 interrupt
> - *	   condition for trigger_level1 interrupt:
> - *		current temperature > threshold + trigger_levels[1]
> - *	2: temperature for trigger_level2 interrupt
> - *	   condition for trigger_level2 interrupt:
> - *		current temperature > threshold + trigger_levels[2]
> - *	3: temperature for trigger_level3 interrupt
> - *	   condition for trigger_level3 interrupt:
> - *		current temperature > threshold + trigger_levels[3]
> - * @trigger_type: defines the type of trigger. Possible values are,
> - *	THROTTLE_ACTIVE trigger type
> - *	THROTTLE_PASSIVE trigger type
> - *	SW_TRIP trigger type
> - *	HW_TRIP
> - * @trigger_enable[]: array to denote which trigger levels are enabled.
> - *	1 = enable trigger_level[] interrupt,
> - *	0 = disable trigger_level[] interrupt
> - * @max_trigger_level: max trigger level supported by the TMU
> - * @non_hw_trigger_levels: number of defined non-hardware trigger levels
>   * @gain: gain of amplifier in the positive-TC generator block
>   *	0 < gain <= 15
>   * @reference_voltage: reference voltage of amplifier
> @@ -79,21 +49,12 @@ enum soc_type {
>   * @efuse_value: platform defined fuse value
>   * @min_efuse_value: minimum valid trimming data
>   * @max_efuse_value: maximum valid trimming data
> - * @first_point_trim: temp value of the first point trimming
> - * @second_point_trim: temp value of the second point trimming
>   * @default_temp_offset: default temperature offset in case of no trimming
>   * @cal_type: calibration type for temperature
>   *
>   * This structure is required for configuration of exynos_tmu driver.
>   */
>  struct exynos_tmu_platform_data {
> -	u8 threshold;
> -	u8 threshold_falling;
> -	u8 trigger_levels[MAX_TRIP_COUNT];
> -	enum trigger_type trigger_type[MAX_TRIP_COUNT];
> -	bool trigger_enable[MAX_TRIP_COUNT];
> -	u8 max_trigger_level;
> -	u8 non_hw_trigger_levels;
>  	u8 gain;
>  	u8 reference_voltage;
>  	u8 noise_cancel_mode;
> @@ -110,18 +71,6 @@ struct exynos_tmu_platform_data {
>  	u32 cal_mode;
>  };
>  
> -/**
> - * struct exynos_tmu_init_data
> - * @tmu_count: number of TMU instances.
> - * @tmu_data: platform data of all TMU instances.
> - * This structure is required to store data for multi-instance exynos tmu
> - * driver.
> - */
> -struct exynos_tmu_init_data {
> -	int tmu_count;
> -	struct exynos_tmu_platform_data tmu_data[];
> -};
> -
>  extern struct exynos_tmu_init_data const exynos3250_default_tmu_data;
>  extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
>  extern struct exynos_tmu_init_data const exynos4412_default_tmu_data;
> -- 
> 2.0.0.rc2
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]