From: Eduardo Valentin <edubezval@gmail.com>
To: Lukasz Majewski <l.majewski@samsung.com>
Cc: Zhang Rui <rui.zhang@intel.com>,
Kukjin Kim <kgene.kim@samsung.com>, Kukjin Kim <kgene@kernel.org>,
Linux PM list <linux-pm@vger.kernel.org>,
"linux-samsung-soc@vger.kernel.org"
<linux-samsung-soc@vger.kernel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Lukasz Majewski <l.majewski@majess.pl>,
Amit Daniel Kachhap <amit.daniel@samsung.com>,
Abhilash Kesavan <kesavan.abhilash@gmail.com>,
Abhilash Kesavan <a.kesavan@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Subject: Re: [PATCH v5 15/18] thermal: samsung: core: Exynos TMU rework to use device tree for configuration
Date: Wed, 21 Jan 2015 05:14:15 -0400 [thread overview]
Message-ID: <20150121091412.GD13468@developer.hsd1.ca.comcast.net> (raw)
In-Reply-To: <20150121094055.6b4a7c40@amdc2363>
[-- Attachment #1: Type: text/plain, Size: 31431 bytes --]
On Wed, Jan 21, 2015 at 09:40:55AM +0100, Lukasz Majewski wrote:
> Hi Eduardo,
>
> > On Mon, Jan 19, 2015 at 12:20:59PM +0100, Lukasz Majewski wrote:
> > > This patch brings support for providing configuration via device
> > > tree. Previously this data has been hardcoded in the
> > > exynos_tmu_data.c file. Such approach was not scalable and very
> > > often required copying the whole data.
> > >
> > > Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> > > ---
> > > Changes for v2:
> > > - Adjust exynos_tmu.c code to the newest ti-soc-thermal repository
> > > - Usage of of-thermal.c exported trip points table
> > > Changes for v3:
> > > - Adding exynos_of_get_soc_type() method to set SOC type from
> > > device's compatible string
> > > - "samsung,tmu_" prefix for TMU specific properties has been added
> > > Changes for v4:
> > > - None
> > > Changes for v5:
> > > - Remove duplicated exynos_tmu_initialize() - reported by Abhilash
> > > Kesavan <a.kesavan@samsung.com>
> > >
> >
> > several checkpatch.pl items to be reviewed in this patch:
> > CHECK: No space is necessary after a cast
> > #509: FILE: drivers/thermal/samsung/exynos_tmu.c:821:
> > + pdata->gain = (u8) value;
> >
> > CHECK: No space is necessary after a cast
> > #511: FILE: drivers/thermal/samsung/exynos_tmu.c:823:
> > + pdata->reference_voltage = (u8) value;
> >
> >
> > Can you please make sure all of your patches pass:
> > checkpatch.pl --strict
>
> ` ^^^^^^^^^ Is now checkpatch.pl required to run with
> --strict rule?
>
> I've tested those patches only with checkpatch with no errors.
>
> Has kernel policy changed recently? Are all developers now obliged to
> use the --strict rule?
no change in policy. the --strict is just appreciated. it depends on
maintainer to maintainer. --strict catches more checks and warnings
though. that is probably why I see people asking for it.
>
>
> >
> > ?
> >
> >
> > > ---
> > > drivers/thermal/samsung/Makefile | 2 -
> > > drivers/thermal/samsung/exynos_tmu.c | 339
> > > ++++++++++++++++++++++-------------
> > > drivers/thermal/samsung/exynos_tmu.h | 53 +----- 3 files changed,
> > > 220 insertions(+), 174 deletions(-)
> > >
> > > diff --git a/drivers/thermal/samsung/Makefile
> > > b/drivers/thermal/samsung/Makefile index c09d830..1e47d0d 100644
> > > --- a/drivers/thermal/samsung/Makefile
> > > +++ b/drivers/thermal/samsung/Makefile
> > > @@ -3,5 +3,3 @@
> > > #
> > > obj-$(CONFIG_EXYNOS_THERMAL) +=
> > > exynos_thermal.o exynos_thermal-y :=
> > > exynos_tmu.o -exynos_thermal-y +=
> > > exynos_tmu_data.o
> > > -exynos_thermal-$(CONFIG_EXYNOS_THERMAL_CORE) +=
> > > exynos_thermal_common.o diff --git
> > > a/drivers/thermal/samsung/exynos_tmu.c
> > > b/drivers/thermal/samsung/exynos_tmu.c index ae30f6a..9d2d685
> > > 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++
> > > b/drivers/thermal/samsung/exynos_tmu.c @@ -1,6 +1,10 @@ /*
> > > * exynos_tmu.c - Samsung EXYNOS TMU (Thermal Management Unit)
> > > *
> > > + * Copyright (C) 2014 Samsung Electronics
> > > + * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > > + * Lukasz Majewski <l.majewski@samsung.com>
> > > + *
> > > * Copyright (C) 2011 Samsung Electronics
> > > * Donggeun Kim <dg77.kim@samsung.com>
> > > * Amit Daniel Kachhap <amit.kachhap@linaro.org>
> > > @@ -31,8 +35,8 @@
> > > #include <linux/platform_device.h>
> > > #include <linux/regulator/consumer.h>
> > >
> > > -#include "exynos_thermal_common.h"
> > > #include "exynos_tmu.h"
> > > +#include "../thermal_core.h"
> > >
> > > /* Exynos generic registers */
> > > #define EXYNOS_TMU_REG_TRIMINFO 0x0
> > > @@ -115,6 +119,7 @@
> > > #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
> > > #define EXYNOS5440_EFUSE_SWAP_OFFSET 8
> > >
> > > +#define MCELSIUS 1000
> > > /**
> > > * struct exynos_tmu_data : A structure to hold the private data
> > > of the TMU driver
> > > @@ -150,7 +155,8 @@ struct exynos_tmu_data {
> > > struct clk *clk, *clk_sec;
> > > u8 temp_error1, temp_error2;
> > > struct regulator *regulator;
> > > - struct thermal_sensor_conf *reg_conf;
> > > + struct thermal_zone_device *tzd;
> > > +
> > > int (*tmu_initialize)(struct platform_device *pdev);
> > > void (*tmu_control)(struct platform_device *pdev, bool on);
> > > int (*tmu_read)(struct exynos_tmu_data *data);
> > > @@ -159,6 +165,33 @@ struct exynos_tmu_data {
> > > void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
> > > };
> > >
> > > +static void exynos_report_trigger(struct exynos_tmu_data *p)
> > > +{
> > > + char data[10], *envp[] = { data, NULL };
> > > + struct thermal_zone_device *tz = p->tzd;
> > > + unsigned long temp;
> > > + unsigned int i;
> > > +
> > > + if (!p) {
> > > + pr_err("Wrong temperature configuration data\n");
> > > + return;
> > > + }
> > > +
> > > + thermal_zone_device_update(tz);
> > > +
> > > + mutex_lock(&tz->lock);
> > > + /* Find the level for which trip happened */
> > > + for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
> > > + tz->ops->get_trip_temp(tz, i, &temp);
> > > + if (tz->last_temperature < temp)
> > > + break;
> > > + }
> > > +
> > > + snprintf(data, sizeof(data), "%u", i);
> > > + kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, envp);
> > > + mutex_unlock(&tz->lock);
> > > +}
> > > +
> > > /*
> > > * TMU treats temperature as a mapped temperature code.
> > > * The temperature is converted differently depending on the
> > > calibration type. @@ -234,14 +267,25 @@ static void
> > > sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
> > > static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold,
> > > bool falling) {
> > > - struct exynos_tmu_platform_data *pdata = data->pdata;
> > > + struct thermal_zone_device *tz = data->tzd;
> > > + const struct thermal_trip * const trips =
> > > + of_thermal_get_trip_points(tz);
> > > + unsigned long temp;
> > > int i;
> > >
> > > - for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
> > > - u8 temp = pdata->trigger_levels[i];
> > > + if (!trips) {
> > > + pr_err("%s: Cannot get trip points from
> > > of-thermal.c!\n",
> > > + __func__);
> > > + return 0;
> > > + }
> > >
> > > + for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
> > > + if (trips[i].type == THERMAL_TRIP_CRITICAL)
> > > + continue;
> > > +
> > > + temp = trips[i].temperature / MCELSIUS;
> > > if (falling)
> > > - temp -= pdata->threshold_falling;
> > > + temp -= (trips[i].hysteresis / MCELSIUS);
> > > else
> > > threshold &= ~(0xff << 8 * i);
> > >
> > > @@ -305,9 +349,19 @@ static void exynos_tmu_control(struct
> > > platform_device *pdev, bool on) static int
> > > exynos4210_tmu_initialize(struct platform_device *pdev) {
> > > struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> > > - struct exynos_tmu_platform_data *pdata = data->pdata;
> > > - unsigned int status;
> > > + struct thermal_zone_device *tz = data->tzd;
> > > + const struct thermal_trip * const trips =
> > > + of_thermal_get_trip_points(tz);
> > > int ret = 0, threshold_code, i;
> > > + unsigned long reference, temp;
> > > + unsigned int status;
> > > +
> > > + if (!trips) {
> > > + pr_err("%s: Cannot get trip points from
> > > of-thermal.c!\n",
> > > + __func__);
> > > + ret = -ENODEV;
> > > + goto out;
> > > + }
> > >
> > > status = readb(data->base + EXYNOS_TMU_REG_STATUS);
> > > if (!status) {
> > > @@ -318,12 +372,19 @@ static int exynos4210_tmu_initialize(struct
> > > platform_device *pdev) sanitize_temp_error(data, readl(data->base +
> > > EXYNOS_TMU_REG_TRIMINFO));
> > > /* Write temperature code for threshold */
> > > - threshold_code = temp_to_code(data, pdata->threshold);
> > > + reference = trips[0].temperature / MCELSIUS;
> > > + threshold_code = temp_to_code(data, reference);
> > > + if (threshold_code < 0) {
> > > + ret = threshold_code;
> > > + goto out;
> > > + }
> > > writeb(threshold_code, data->base +
> > > EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
> > > - for (i = 0; i < pdata->non_hw_trigger_levels; i++)
> > > - writeb(pdata->trigger_levels[i], data->base +
> > > + for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
> > > + temp = trips[i].temperature / MCELSIUS;
> > > + writeb(temp - reference, data->base +
> > > EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
> > > + }
> > >
> > > data->tmu_clear_irqs(data);
> > > out:
> > > @@ -333,9 +394,11 @@ out:
> > > static int exynos4412_tmu_initialize(struct platform_device *pdev)
> > > {
> > > struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> > > - struct exynos_tmu_platform_data *pdata = data->pdata;
> > > + const struct thermal_trip * const trips =
> > > + of_thermal_get_trip_points(data->tzd);
> > > unsigned int status, trim_info, con, ctrl,
> > > rising_threshold; int ret = 0, threshold_code, i;
> > > + unsigned long crit_temp = 0;
> > >
> > > status = readb(data->base + EXYNOS_TMU_REG_STATUS);
> > > if (!status) {
> > > @@ -373,17 +436,29 @@ static int exynos4412_tmu_initialize(struct
> > > platform_device *pdev) data->tmu_clear_irqs(data);
> > >
> > > /* if last threshold limit is also present */
> > > - i = pdata->max_trigger_level - 1;
> > > - if (pdata->trigger_levels[i] && pdata->trigger_type[i] ==
> > > HW_TRIP) {
> > > - threshold_code = temp_to_code(data,
> > > pdata->trigger_levels[i]);
> > > - /* 1-4 level to be assigned in th0 reg */
> > > - rising_threshold &= ~(0xff << 8 * i);
> > > - rising_threshold |= threshold_code << 8 * i;
> > > - writel(rising_threshold, data->base +
> > > EXYNOS_THD_TEMP_RISE);
> > > - con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
> > > - con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
> > > - writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
> > > + for (i = 0; i < of_thermal_get_ntrips(data->tzd); i++) {
> > > + if (trips[i].type == THERMAL_TRIP_CRITICAL) {
> > > + crit_temp = trips[i].temperature;
> > > + break;
> > > + }
> > > + }
> > > +
> > > + if (i == of_thermal_get_ntrips(data->tzd)) {
> > > + pr_err("%s: No CRITICAL trip point defined at
> > > of-thermal.c!\n",
> > > + __func__);
> > > + ret = -EINVAL;
> > > + goto out;
> > > }
> > > +
> > > + threshold_code = temp_to_code(data, crit_temp / MCELSIUS);
> > > + /* 1-4 level to be assigned in th0 reg */
> > > + rising_threshold &= ~(0xff << 8 * i);
> > > + rising_threshold |= threshold_code << 8 * i;
> > > + writel(rising_threshold, data->base +
> > > EXYNOS_THD_TEMP_RISE);
> > > + con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
> > > + con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
> > > + writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
> > > +
> > > out:
> > > return ret;
> > > }
> > > @@ -391,9 +466,9 @@ out:
> > > static int exynos5440_tmu_initialize(struct platform_device *pdev)
> > > {
> > > struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> > > - struct exynos_tmu_platform_data *pdata = data->pdata;
> > > unsigned int trim_info = 0, con, rising_threshold;
> > > - int ret = 0, threshold_code, i;
> > > + int ret = 0, threshold_code;
> > > + unsigned long crit_temp = 0;
> > >
> > > /*
> > > * For exynos5440 soc triminfo value is swapped between
> > > TMU0 and @@ -422,9 +497,8 @@ static int
> > > exynos5440_tmu_initialize(struct platform_device *pdev)
> > > data->tmu_clear_irqs(data);
> > > /* if last threshold limit is also present */
> > > - i = pdata->max_trigger_level - 1;
> > > - if (pdata->trigger_levels[i] && pdata->trigger_type[i] ==
> > > HW_TRIP) {
> > > - threshold_code = temp_to_code(data,
> > > pdata->trigger_levels[i]);
> > > + if (!data->tzd->ops->get_crit_temp(data->tzd, &crit_temp))
> > > {
> > > + threshold_code = temp_to_code(data, crit_temp /
> > > MCELSIUS); /* 5th level to be assigned in th2 reg */
> > > rising_threshold =
> > > threshold_code <<
> > > EXYNOS5440_TMU_TH_RISE4_SHIFT; @@ -442,7 +516,7 @@ static int
> > > exynos5440_tmu_initialize(struct platform_device *pdev) static void
> > > exynos4210_tmu_control(struct platform_device *pdev, bool on) {
> > > struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> > > - struct exynos_tmu_platform_data *pdata = data->pdata;
> > > + struct thermal_zone_device *tz = data->tzd;
> > > unsigned int con, interrupt_en;
> > >
> > > con = get_con_reg(data, readl(data->base +
> > > EXYNOS_TMU_REG_CONTROL)); @@ -450,10 +524,15 @@ static void
> > > exynos4210_tmu_control(struct platform_device *pdev, bool on) if
> > > (on) { con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
> > > interrupt_en =
> > > - pdata->trigger_enable[3] <<
> > > EXYNOS_TMU_INTEN_RISE3_SHIFT |
> > > - pdata->trigger_enable[2] <<
> > > EXYNOS_TMU_INTEN_RISE2_SHIFT |
> > > - pdata->trigger_enable[1] <<
> > > EXYNOS_TMU_INTEN_RISE1_SHIFT |
> > > - pdata->trigger_enable[0] <<
> > > EXYNOS_TMU_INTEN_RISE0_SHIFT;
> > > + (of_thermal_is_trip_valid(tz, 3)
> > > + << EXYNOS_TMU_INTEN_RISE3_SHIFT) |
> > > + (of_thermal_is_trip_valid(tz, 2)
> > > + << EXYNOS_TMU_INTEN_RISE2_SHIFT) |
> > > + (of_thermal_is_trip_valid(tz, 1)
> > > + << EXYNOS_TMU_INTEN_RISE1_SHIFT) |
> > > + (of_thermal_is_trip_valid(tz, 0)
> > > + << EXYNOS_TMU_INTEN_RISE0_SHIFT);
> > > +
> > > if (data->soc != SOC_ARCH_EXYNOS4210)
> > > interrupt_en |=
> > > interrupt_en <<
> > > EXYNOS_TMU_INTEN_FALL0_SHIFT; @@ -468,7 +547,7 @@ static void
> > > exynos4210_tmu_control(struct platform_device *pdev, bool on)
> > > static void exynos5440_tmu_control(struct platform_device *pdev,
> > > bool on) { struct exynos_tmu_data *data =
> > > platform_get_drvdata(pdev);
> > > - struct exynos_tmu_platform_data *pdata = data->pdata;
> > > + struct thermal_zone_device *tz = data->tzd;
> > > unsigned int con, interrupt_en;
> > >
> > > con = get_con_reg(data, readl(data->base +
> > > EXYNOS5440_TMU_S0_7_CTRL)); @@ -476,11 +555,16 @@ static void
> > > exynos5440_tmu_control(struct platform_device *pdev, bool on) if
> > > (on) { con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
> > > interrupt_en =
> > > - pdata->trigger_enable[3] <<
> > > EXYNOS5440_TMU_INTEN_RISE3_SHIFT |
> > > - pdata->trigger_enable[2] <<
> > > EXYNOS5440_TMU_INTEN_RISE2_SHIFT |
> > > - pdata->trigger_enable[1] <<
> > > EXYNOS5440_TMU_INTEN_RISE1_SHIFT |
> > > - pdata->trigger_enable[0] <<
> > > EXYNOS5440_TMU_INTEN_RISE0_SHIFT;
> > > - interrupt_en |= interrupt_en <<
> > > EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
> > > + (of_thermal_is_trip_valid(tz, 3)
> > > + << EXYNOS5440_TMU_INTEN_RISE3_SHIFT) |
> > > + (of_thermal_is_trip_valid(tz, 2)
> > > + << EXYNOS5440_TMU_INTEN_RISE2_SHIFT) |
> > > + (of_thermal_is_trip_valid(tz, 1)
> > > + << EXYNOS5440_TMU_INTEN_RISE1_SHIFT) |
> > > + (of_thermal_is_trip_valid(tz, 0)
> > > + << EXYNOS5440_TMU_INTEN_RISE0_SHIFT);
> > > + interrupt_en |=
> > > + interrupt_en <<
> > > EXYNOS5440_TMU_INTEN_FALL0_SHIFT; } else {
> > > con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
> > > interrupt_en = 0; /* Disable all interrupts */
> > > @@ -489,19 +573,22 @@ static void exynos5440_tmu_control(struct
> > > platform_device *pdev, bool on) writel(con, data->base +
> > > EXYNOS5440_TMU_S0_7_CTRL); }
> > >
> > > -static int exynos_tmu_read(struct exynos_tmu_data *data)
> > > +int exynos_get_temp(void *p, long *temp)
> > > {
> > > - int ret;
> > > + struct exynos_tmu_data *data = p;
> > > +
> > > + if (!data)
> > > + return -EINVAL;
> > >
> > > mutex_lock(&data->lock);
> > > clk_enable(data->clk);
> > > - ret = data->tmu_read(data);
> > > - if (ret >= 0)
> > > - ret = code_to_temp(data, ret);
> > > +
> > > + *temp = code_to_temp(data, data->tmu_read(data)) *
> > > MCELSIUS; +
> > > clk_disable(data->clk);
> > > mutex_unlock(&data->lock);
> > >
> > > - return ret;
> > > + return 0;
> > > }
> > >
> > > #ifdef CONFIG_THERMAL_EMULATION
> > > @@ -613,7 +700,7 @@ static void exynos_tmu_work(struct work_struct
> > > *work) if (!IS_ERR(data->clk_sec))
> > > clk_disable(data->clk_sec);
> > >
> > > - exynos_report_trigger(data->reg_conf);
> > > + exynos_report_trigger(data);
> > > mutex_lock(&data->lock);
> > > clk_enable(data->clk);
> > >
> > > @@ -673,55 +760,89 @@ static irqreturn_t exynos_tmu_irq(int irq,
> > > void *id) static const struct of_device_id exynos_tmu_match[] = {
> > > {
> > > .compatible = "samsung,exynos3250-tmu",
> > > - .data = &exynos3250_default_tmu_data,
> > > },
> > > {
> > > .compatible = "samsung,exynos4210-tmu",
> > > - .data = &exynos4210_default_tmu_data,
> > > },
> > > {
> > > .compatible = "samsung,exynos4412-tmu",
> > > - .data = &exynos4412_default_tmu_data,
> > > },
> > > {
> > > .compatible = "samsung,exynos5250-tmu",
> > > - .data = &exynos5250_default_tmu_data,
> > > },
> > > {
> > > .compatible = "samsung,exynos5260-tmu",
> > > - .data = &exynos5260_default_tmu_data,
> > > },
> > > {
> > > .compatible = "samsung,exynos5420-tmu",
> > > - .data = &exynos5420_default_tmu_data,
> > > },
> > > {
> > > .compatible =
> > > "samsung,exynos5420-tmu-ext-triminfo",
> > > - .data = &exynos5420_default_tmu_data,
> > > },
> > > {
> > > .compatible = "samsung,exynos5440-tmu",
> > > - .data = &exynos5440_default_tmu_data,
> > > },
> > > {},
> > > };
> > > MODULE_DEVICE_TABLE(of, exynos_tmu_match);
> > >
> > > -static inline struct exynos_tmu_platform_data
> > > *exynos_get_driver_data(
> > > - struct platform_device *pdev, int id)
> > > +static int exynos_of_get_soc_type(struct device_node *np)
> > > {
> > > - struct exynos_tmu_init_data *data_table;
> > > - struct exynos_tmu_platform_data *tmu_data;
> > > - const struct of_device_id *match;
> > > + if (of_device_is_compatible(np, "samsung,exynos3250-tmu"))
> > > + return SOC_ARCH_EXYNOS3250;
> > > + else if (of_device_is_compatible(np,
> > > "samsung,exynos4210-tmu"))
> > > + return SOC_ARCH_EXYNOS4210;
> > > + else if (of_device_is_compatible(np,
> > > "samsung,exynos4412-tmu"))
> > > + return SOC_ARCH_EXYNOS4412;
> > > + else if (of_device_is_compatible(np,
> > > "samsung,exynos5250-tmu"))
> > > + return SOC_ARCH_EXYNOS5250;
> > > + else if (of_device_is_compatible(np,
> > > "samsung,exynos5260-tmu"))
> > > + return SOC_ARCH_EXYNOS5260;
> > > + else if (of_device_is_compatible(np,
> > > "samsung,exynos5420-tmu"))
> > > + return SOC_ARCH_EXYNOS5420;
> > > + else if (of_device_is_compatible(np,
> > > +
> > > "samsung,exynos5420-tmu-ext-triminfo"))
> > > + return SOC_ARCH_EXYNOS5420_TRIMINFO;
> > > + else if (of_device_is_compatible(np,
> > > "samsung,exynos5440-tmu"))
> > > + return SOC_ARCH_EXYNOS5440;
> > > +
> > > + return -EINVAL;
> > > +}
> > >
> > > - match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
> > > - if (!match)
> > > - return NULL;
> > > - data_table = (struct exynos_tmu_init_data *) match->data;
> > > - if (!data_table || id >= data_table->tmu_count)
> > > - return NULL;
> > > - tmu_data = data_table->tmu_data;
> > > - return (struct exynos_tmu_platform_data *) (tmu_data + id);
> > > +static int exynos_of_sensor_conf(struct device_node *np,
> > > + struct exynos_tmu_platform_data
> > > *pdata) +{
> > > + u32 value;
> > > + int ret;
> > > +
> > > + of_node_get(np);
> > > +
> > > + ret = of_property_read_u32(np, "samsung,tmu_gain", &value);
> > > + pdata->gain = (u8) value;
> > > + of_property_read_u32(np, "samsung,tmu_reference_voltage",
> > > &value);
> > > + pdata->reference_voltage = (u8) value;
> > > + of_property_read_u32(np, "samsung,tmu_noise_cancel_mode",
> > > &value);
> > > + pdata->noise_cancel_mode = (u8) value;
> > > +
> > > + of_property_read_u32(np, "samsung,tmu_efuse_value",
> > > + &pdata->efuse_value);
> > > + of_property_read_u32(np, "samsung,tmu_min_efuse_value",
> > > + &pdata->min_efuse_value);
> > > + of_property_read_u32(np, "samsung,tmu_max_efuse_value",
> > > + &pdata->max_efuse_value);
> > > +
> > > + of_property_read_u32(np, "samsung,tmu_first_point_trim",
> > > &value);
> > > + pdata->first_point_trim = (u8) value;
> > > + of_property_read_u32(np, "samsung,tmu_second_point_trim",
> > > &value);
> > > + pdata->second_point_trim = (u8) value;
> > > + of_property_read_u32(np,
> > > "samsung,tmu_default_temp_offset", &value);
> > > + pdata->default_temp_offset = (u8) value;
> > > +
> > > + of_property_read_u32(np, "samsung,tmu_cal_type",
> > > &pdata->cal_type);
> > > + of_property_read_u32(np, "samsung,tmu_cal_mode",
> > > &pdata->cal_mode); +
> > > + of_node_put(np);
> > > + return 0;
> > > }
> > >
> > > static int exynos_map_dt_data(struct platform_device *pdev)
> > > @@ -771,14 +892,15 @@ static int exynos_map_dt_data(struct
> > > platform_device *pdev) return -EADDRNOTAVAIL;
> > > }
> > >
> > > - pdata = exynos_get_driver_data(pdev, data->id);
> > > - if (!pdata) {
> > > - dev_err(&pdev->dev, "No platform init data
> > > supplied.\n");
> > > - return -ENODEV;
> > > - }
> > > + pdata = devm_kzalloc(&pdev->dev,
> > > + sizeof(struct
> > > exynos_tmu_platform_data),
> > > + GFP_KERNEL);
> > > + if (!pdata)
> > > + return -ENOMEM;
> > >
> > > + exynos_of_sensor_conf(pdev->dev.of_node, pdata);
> > > data->pdata = pdata;
> > > - data->soc = pdata->type;
> > > + data->soc = exynos_of_get_soc_type(pdev->dev.of_node);
> > >
> > > switch (data->soc) {
> > > case SOC_ARCH_EXYNOS4210:
> > > @@ -834,12 +956,16 @@ static int exynos_map_dt_data(struct
> > > platform_device *pdev) return 0;
> > > }
> > >
> > > +static struct thermal_zone_of_device_ops exynos_sensor_ops = {
> > > + .get_temp = exynos_get_temp,
> > > + .set_emul_temp = exynos_tmu_set_emulation,
> > > +};
> > > +
> > > static int exynos_tmu_probe(struct platform_device *pdev)
> > > {
> > > - struct exynos_tmu_data *data;
> > > struct exynos_tmu_platform_data *pdata;
> > > - struct thermal_sensor_conf *sensor_conf;
> > > - int ret, i;
> > > + struct exynos_tmu_data *data;
> > > + int ret;
> > >
> > > data = devm_kzalloc(&pdev->dev, sizeof(struct
> > > exynos_tmu_data), GFP_KERNEL);
> > > @@ -849,9 +975,15 @@ static int exynos_tmu_probe(struct
> > > platform_device *pdev) platform_set_drvdata(pdev, data);
> > > mutex_init(&data->lock);
> > >
> > > + data->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0,
> > > data,
> > > +
> > > &exynos_sensor_ops);
> > > + if (IS_ERR(data->tzd)) {
> > > + pr_err("thermal: tz: %p ERROR\n", data->tzd);
> > > + return PTR_ERR(data->tzd);
> > > + }
> > > ret = exynos_map_dt_data(pdev);
> > > if (ret)
> > > - return ret;
> > > + goto err_sensor;
> > >
> > > pdata = data->pdata;
> > >
> > > @@ -860,20 +992,22 @@ static int exynos_tmu_probe(struct
> > > platform_device *pdev) data->clk = devm_clk_get(&pdev->dev,
> > > "tmu_apbif"); if (IS_ERR(data->clk)) {
> > > dev_err(&pdev->dev, "Failed to get clock\n");
> > > - return PTR_ERR(data->clk);
> > > + ret = PTR_ERR(data->clk);
> > > + goto err_sensor;
> > > }
> > >
> > > data->clk_sec = devm_clk_get(&pdev->dev,
> > > "tmu_triminfo_apbif"); if (IS_ERR(data->clk_sec)) {
> > > if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
> > > dev_err(&pdev->dev, "Failed to get
> > > triminfo clock\n");
> > > - return PTR_ERR(data->clk_sec);
> > > + ret = PTR_ERR(data->clk_sec);
> > > + goto err_sensor;
> > > }
> > > } else {
> > > ret = clk_prepare(data->clk_sec);
> > > if (ret) {
> > > dev_err(&pdev->dev, "Failed to get
> > > clock\n");
> > > - return ret;
> > > + goto err_sensor;
> > > }
> > > }
> > >
> > > @@ -889,45 +1023,6 @@ static int exynos_tmu_probe(struct
> > > platform_device *pdev) goto err_clk;
> > > }
> > >
> > > - exynos_tmu_control(pdev, true);
> > > -
> > > - /* Allocate a structure to register with the exynos core
> > > thermal */
> > > - sensor_conf = devm_kzalloc(&pdev->dev,
> > > - sizeof(struct
> > > thermal_sensor_conf), GFP_KERNEL);
> > > - if (!sensor_conf) {
> > > - ret = -ENOMEM;
> > > - goto err_clk;
> > > - }
> > > - sprintf(sensor_conf->name, "therm_zone%d", data->id);
> > > - sensor_conf->read_temperature = (int (*)(void
> > > *))exynos_tmu_read;
> > > - sensor_conf->write_emul_temp =
> > > - (int (*)(void *, unsigned
> > > long))exynos_tmu_set_emulation;
> > > - sensor_conf->driver_data = data;
> > > - sensor_conf->trip_data.trip_count =
> > > pdata->trigger_enable[0] +
> > > - pdata->trigger_enable[1] +
> > > pdata->trigger_enable[2]+
> > > - pdata->trigger_enable[3];
> > > -
> > > - for (i = 0; i < sensor_conf->trip_data.trip_count; i++) {
> > > - sensor_conf->trip_data.trip_val[i] =
> > > - pdata->threshold +
> > > pdata->trigger_levels[i];
> > > - sensor_conf->trip_data.trip_type[i] =
> > > - pdata->trigger_type[i];
> > > - }
> > > -
> > > - sensor_conf->trip_data.trigger_falling =
> > > pdata->threshold_falling; -
> > > - sensor_conf->dev = &pdev->dev;
> > > - /* Register the sensor with thermal management interface */
> > > - ret = exynos_register_thermal(sensor_conf);
> > > - if (ret) {
> > > - if (ret != -EPROBE_DEFER)
> > > - dev_err(&pdev->dev,
> > > - "Failed to register thermal
> > > interface: %d\n",
> > > - ret);
> > > - goto err_clk;
> > > - }
> > > - data->reg_conf = sensor_conf;
> > > -
> > > ret = devm_request_irq(&pdev->dev, data->irq,
> > > exynos_tmu_irq, IRQF_TRIGGER_RISING | IRQF_SHARED,
> > > dev_name(&pdev->dev), data); if (ret) {
> > > @@ -935,21 +1030,25 @@ static int exynos_tmu_probe(struct
> > > platform_device *pdev) goto err_clk;
> > > }
> > >
> > > + exynos_tmu_control(pdev, true);
> > > return 0;
> > > err_clk:
> > > clk_unprepare(data->clk);
> > > err_clk_sec:
> > > if (!IS_ERR(data->clk_sec))
> > > clk_unprepare(data->clk_sec);
> > > +err_sensor:
> > > + thermal_zone_of_sensor_unregister(&pdev->dev, data->tzd);
> > > +
> > > return ret;
> > > }
> > >
> > > static int exynos_tmu_remove(struct platform_device *pdev)
> > > {
> > > struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> > > + struct thermal_zone_device *tzd = data->tzd;
> > >
> > > - exynos_unregister_thermal(data->reg_conf);
> > > -
> > > + thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
> > > exynos_tmu_control(pdev, false);
> > >
> > > clk_unprepare(data->clk);
> > > diff --git a/drivers/thermal/samsung/exynos_tmu.h
> > > b/drivers/thermal/samsung/exynos_tmu.h index 627dec9..d876d4c 100644
> > > --- a/drivers/thermal/samsung/exynos_tmu.h
> > > +++ b/drivers/thermal/samsung/exynos_tmu.h
> > > @@ -23,8 +23,7 @@
> > > #ifndef _EXYNOS_TMU_H
> > > #define _EXYNOS_TMU_H
> > > #include <linux/cpu_cooling.h>
> > > -
> > > -#include "exynos_thermal_common.h"
> > > +#include <dt-bindings/thermal/thermal_exynos.h>
> > >
> > > enum soc_type {
> > > SOC_ARCH_EXYNOS3250 = 1,
> > > @@ -36,38 +35,9 @@ enum soc_type {
> > > SOC_ARCH_EXYNOS5420_TRIMINFO,
> > > SOC_ARCH_EXYNOS5440,
> > > };
> > > -#include <dt-bindings/thermal/thermal_exynos.h>
> > >
> > > /**
> > > * struct exynos_tmu_platform_data
> > > - * @threshold: basic temperature for generating interrupt
> > > - * 25 <= threshold <= 125 [unit: degree Celsius]
> > > - * @threshold_falling: differntial value for setting threshold
> > > - * of temperature falling interrupt.
> > > - * @trigger_levels: array for each interrupt levels
> > > - * [unit: degree Celsius]
> > > - * 0: temperature for trigger_level0 interrupt
> > > - * condition for trigger_level0 interrupt:
> > > - * current temperature > threshold +
> > > trigger_levels[0]
> > > - * 1: temperature for trigger_level1 interrupt
> > > - * condition for trigger_level1 interrupt:
> > > - * current temperature > threshold +
> > > trigger_levels[1]
> > > - * 2: temperature for trigger_level2 interrupt
> > > - * condition for trigger_level2 interrupt:
> > > - * current temperature > threshold +
> > > trigger_levels[2]
> > > - * 3: temperature for trigger_level3 interrupt
> > > - * condition for trigger_level3 interrupt:
> > > - * current temperature > threshold +
> > > trigger_levels[3]
> > > - * @trigger_type: defines the type of trigger. Possible values are,
> > > - * THROTTLE_ACTIVE trigger type
> > > - * THROTTLE_PASSIVE trigger type
> > > - * SW_TRIP trigger type
> > > - * HW_TRIP
> > > - * @trigger_enable[]: array to denote which trigger levels are
> > > enabled.
> > > - * 1 = enable trigger_level[] interrupt,
> > > - * 0 = disable trigger_level[] interrupt
> > > - * @max_trigger_level: max trigger level supported by the TMU
> > > - * @non_hw_trigger_levels: number of defined non-hardware trigger
> > > levels
> > > * @gain: gain of amplifier in the positive-TC generator block
> > > * 0 < gain <= 15
> > > * @reference_voltage: reference voltage of amplifier
> > > @@ -79,21 +49,12 @@ enum soc_type {
> > > * @efuse_value: platform defined fuse value
> > > * @min_efuse_value: minimum valid trimming data
> > > * @max_efuse_value: maximum valid trimming data
> > > - * @first_point_trim: temp value of the first point trimming
> > > - * @second_point_trim: temp value of the second point trimming
> > > * @default_temp_offset: default temperature offset in case of no
> > > trimming
> > > * @cal_type: calibration type for temperature
> > > *
> > > * This structure is required for configuration of exynos_tmu
> > > driver. */
> > > struct exynos_tmu_platform_data {
> > > - u8 threshold;
> > > - u8 threshold_falling;
> > > - u8 trigger_levels[MAX_TRIP_COUNT];
> > > - enum trigger_type trigger_type[MAX_TRIP_COUNT];
> > > - bool trigger_enable[MAX_TRIP_COUNT];
> > > - u8 max_trigger_level;
> > > - u8 non_hw_trigger_levels;
> > > u8 gain;
> > > u8 reference_voltage;
> > > u8 noise_cancel_mode;
> > > @@ -110,18 +71,6 @@ struct exynos_tmu_platform_data {
> > > u32 cal_mode;
> > > };
> > >
> > > -/**
> > > - * struct exynos_tmu_init_data
> > > - * @tmu_count: number of TMU instances.
> > > - * @tmu_data: platform data of all TMU instances.
> > > - * This structure is required to store data for multi-instance
> > > exynos tmu
> > > - * driver.
> > > - */
> > > -struct exynos_tmu_init_data {
> > > - int tmu_count;
> > > - struct exynos_tmu_platform_data tmu_data[];
> > > -};
> > > -
> > > extern struct exynos_tmu_init_data const
> > > exynos3250_default_tmu_data; extern struct exynos_tmu_init_data
> > > const exynos4210_default_tmu_data; extern struct
> > > exynos_tmu_init_data const exynos4412_default_tmu_data; --
> > > 2.0.0.rc2
> > >
>
>
>
> --
> Best regards,
>
> Lukasz Majewski
>
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
next prev parent reply other threads:[~2015-01-21 9:14 UTC|newest]
Thread overview: 244+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-09 16:38 [PATCH 00/21] thermal: exynos: Thermal code rework to use device tree Lukasz Majewski
2014-10-09 16:38 ` [PATCH 01/21] thermal: of: Extend of-thermal.c to provide number of trip points Lukasz Majewski
2014-11-07 1:34 ` Eduardo Valentin
2014-11-07 9:14 ` Lukasz Majewski
2014-10-09 16:38 ` [PATCH 02/21] thermal: of: Extend of-thermal.c to provide check if trip point is enabled Lukasz Majewski
2014-11-07 1:37 ` Eduardo Valentin
2014-11-07 9:15 ` Lukasz Majewski
2014-10-09 16:38 ` [PATCH 03/21] thermal: of: Extend of-thermal.c to provide number of non critical trip points Lukasz Majewski
2014-11-07 1:41 ` Eduardo Valentin
2014-11-07 10:05 ` Lukasz Majewski
2014-11-07 16:06 ` Eduardo Valentin
2014-11-07 16:43 ` Lukasz Majewski
2014-11-12 9:42 ` Lukasz Majewski
2014-11-18 15:20 ` Eduardo Valentin
2014-11-18 20:25 ` Lukasz Majewski
2014-11-07 23:04 ` Dmitry Torokhov
2014-10-09 16:38 ` [PATCH 04/21] thermal: of: Extend current of-thermal.c code to allow setting emulated temp Lukasz Majewski
2014-11-07 1:44 ` Eduardo Valentin
2014-11-07 11:20 ` Lukasz Majewski
2014-11-18 15:23 ` Eduardo Valentin
2014-11-18 20:28 ` Lukasz Majewski
2014-10-09 16:38 ` [PATCH 05/21] thermal: exynos: cosmetic: Correct comment format Lukasz Majewski
2014-10-09 16:38 ` [PATCH 06/21] thermal: exynos: Provide thermal_exynos.h file to be included in device tree files Lukasz Majewski
2014-10-09 16:38 ` [PATCH 07/21] thermal: dts: trats: Enable TMU on the Exynos4210 trats device Lukasz Majewski
2014-10-09 16:38 ` [PATCH 08/21] thermal: dts: exynos: Adding LD010 regulator node necessary for TMU on Odroid U3 board Lukasz Majewski
2014-10-09 16:38 ` [PATCH 09/21] thermal: dts: Provide bindings and enable TMU at Exynos4x12 devices Lukasz Majewski
2014-10-09 16:38 ` [PATCH 10/21] thermal: cpu_cooling: dts: Define device tree bindings for Exynos cpu cooling functionality Lukasz Majewski
2014-10-09 16:38 ` [PATCH 11/21] thermal: cpu_cooling: Modify exynos thermal code to use device tree for cpu cooling configuration Lukasz Majewski
2014-10-09 16:38 ` [PATCH 12/21] thermal: exynos: dts: Add default definition for the TMU sensor Lukasz Majewski
2014-10-09 16:38 ` [PATCH 13/21] thermal: dts: Default trip points definition for Exynos5420 SoCs Lukasz Majewski
2014-10-09 16:38 ` [PATCH 14/21] thermal: exynos: dts: Define default thermal-zones for Exynos4 Lukasz Majewski
2014-10-09 16:38 ` [PATCH 15/21] thermal: dts: exynos: Trip points and sensor configuration data for Exynos5440 Lukasz Majewski
2014-10-09 16:38 ` [PATCH 16/21] thermal: exynos: dts: Provide device tree bindings identical to one in exynos_tmu_data.c Lukasz Majewski
2014-10-09 16:38 ` [PATCH 17/21] thermal: samsung: core: Exynos TMU rework to use device tree for configuration Lukasz Majewski
2014-10-09 16:38 ` [PATCH 18/21] thermal: exynos: Remove exynos_thermal_common.[c|h] files Lukasz Majewski
2014-10-09 16:38 ` [PATCH 19/21] thermal: exynos: Remove exynos_tmu_data.c file Lukasz Majewski
2014-10-09 16:38 ` [PATCH 20/21] thermal: exynos: Make Exynos5250 TMU compatible with Exynos4412 Lukasz Majewski
2014-10-09 16:38 ` [PATCH 21/21] thermal: exynos: Make Exynos3250 " Lukasz Majewski
2014-10-09 23:34 ` Chanwoo Choi
2014-10-10 8:51 ` Lukasz Majewski
2014-10-23 8:50 ` [PATCH 00/21] thermal: exynos: Thermal code rework to use device tree Lukasz Majewski
2014-11-20 16:21 ` [PATCH v2 0/4] thermal: of: of-thermal.c API extensions Lukasz Majewski
2014-11-20 16:21 ` [PATCH v2 1/4] thermal: of: Extend of-thermal.c to provide number of trip points Lukasz Majewski
2014-11-25 6:04 ` Eduardo Valentin
2014-11-26 8:28 ` Lukasz Majewski
2014-11-20 16:21 ` [PATCH v2 2/4] thermal: of: Extend of-thermal.c to provide check if trip point is enabled Lukasz Majewski
2014-11-25 8:25 ` Eduardo Valentin
2014-11-26 8:31 ` Lukasz Majewski
2014-11-20 16:21 ` [PATCH v2 3/4] thermal: of: Extend of-thermal to export table of trip points Lukasz Majewski
2014-11-25 20:36 ` Eduardo Valentin
2014-11-26 8:35 ` Lukasz Majewski
2014-11-26 15:18 ` Eduardo Valentin
2014-11-26 20:43 ` navneet kumar
2014-11-26 21:12 ` Guenter Roeck
2014-11-26 23:12 ` navneet kumar
2014-11-26 23:09 ` Eduardo Valentin
2014-11-27 9:42 ` Lukasz Majewski
2014-11-25 20:38 ` Eduardo Valentin
2014-11-26 8:39 ` Lukasz Majewski
2014-11-20 16:21 ` [PATCH v2 4/4] thermal: of: Extend current of-thermal.c code to allow setting emulated temp Lukasz Majewski
2014-11-25 20:44 ` Eduardo Valentin
2014-11-26 8:47 ` Lukasz Majewski
2014-12-08 17:04 ` [PATCH v3 0/5] thermal: of: of-thermal.c API extensions Lukasz Majewski
2014-12-08 17:04 ` [PATCH v3 1/5] thermal: of: Extend of-thermal.c to provide number of trip points Lukasz Majewski
2014-12-08 19:52 ` Eduardo Valentin
2014-12-08 23:02 ` Lukasz Majewski
2014-12-08 17:04 ` [PATCH v3 2/5] thermal: of: Extend of-thermal.c to provide check if trip point is valid Lukasz Majewski
2014-12-08 17:04 ` [PATCH v3 3/5] thermal: of: Rename struct __thermal_trip to struct thermal_trip Lukasz Majewski
2014-12-08 17:04 ` [PATCH v3 4/5] thermal: of: Extend of-thermal to export table of trip points Lukasz Majewski
2014-12-08 17:04 ` [PATCH v3 5/5] thermal: of: Extend current of-thermal.c code to allow setting emulated temp Lukasz Majewski
2014-12-09 1:21 ` [PATCH v3 0/5] thermal: of: of-thermal.c API extensions Eduardo Valentin
2014-12-10 12:09 ` [PATCH v2 00/17] thermal: exynos: Thermal code rework to use device tree Lukasz Majewski
2014-12-10 10:27 ` Eduardo Valentin
2014-12-10 14:19 ` Lukasz Majewski
2014-12-22 15:50 ` Abhilash Kesavan
2014-12-22 16:21 ` Lukasz Majewski
2014-12-23 15:27 ` Abhilash Kesavan
2014-12-10 12:09 ` [PATCH v2 01/17] thermal: exynos: cosmetic: Correct comment format Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 02/17] thermal: exynos: Provide thermal_exynos.h file to be included in device tree files Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 03/17] thermal: dts: trats: Enable TMU on the Exynos4210 trats device Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 04/17] thermal: dts: exynos: Add LD010 regulator node necessary for TMU on Odroid Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 05/17] thermal: dts: Enable TMU at Exynos4412 based Odroid U3 device Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 06/17] thermal: cpu_cooling: dts: Define device tree bindings for Exynos cpu cooling functionality Lukasz Majewski
2015-01-02 18:15 ` Eduardo Valentin
2015-01-12 14:09 ` Lukasz Majewski
2015-01-12 14:24 ` Eduardo Valentin
2015-01-13 8:22 ` Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 07/17] thermal: cpu_cooling: Modify exynos thermal code to use device tree for cpu cooling configuration Lukasz Majewski
2015-01-02 18:18 ` Eduardo Valentin
2015-01-12 17:08 ` Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 08/17] thermal: exynos: dts: Add default definition of the TMU sensor parameter Lukasz Majewski
2015-01-02 18:11 ` Eduardo Valentin
2015-01-02 18:26 ` Eduardo Valentin
2015-01-12 14:42 ` Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 09/17] thermal: dts: Default trip points definition for Exynos5420 SoCs Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 10/17] thermal: exynos: dts: Define default thermal-zones for Exynos4 Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 11/17] thermal: dts: exynos: Trip points and sensor configuration data for Exynos5440 Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 12/17] thermal: exynos: dts: Provide device tree bindings identical to one in exynos_tmu_data.c Lukasz Majewski
2015-01-02 18:13 ` Eduardo Valentin
2015-01-12 15:36 ` Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 13/17] thermal: samsung: core: Exynos TMU rework to use device tree for configuration Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 14/17] thermal: exynos: Remove exynos_thermal_common.[c|h] files Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 15/17] thermal: exynos: Remove exynos_tmu_data.c file Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 16/17] thermal: exynos: Make Exynos5250 TMU compatible with Exynos4412 Lukasz Majewski
2014-12-10 12:09 ` [PATCH v2 17/17] thermal: exynos: Make Exynos3250 " Lukasz Majewski
2015-01-02 18:25 ` [PATCH v2 00/17] thermal: exynos: Thermal code rework to use device tree Eduardo Valentin
2015-01-03 19:53 ` Lukasz Majewski
2015-01-05 21:11 ` Eduardo Valentin
2015-01-14 13:40 ` [PATCH v3 00/16] " Lukasz Majewski
2015-01-14 13:40 ` [PATCH v3 01/16] thermal: exynos: cosmetic: Correct comment format Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 02/16] thermal: exynos: Provide thermal_exynos.h file to be included in device tree files Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 03/16] arm: dts: trats: Enable TMU on the Exynos4210 trats device Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 04/16] arm: dts: odroid: Add LD010 regulator node necessary for TMU on Odroid Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 05/16] thermal: dts: Enable TMU at Exynos4412 based Odroid U3 device Lukasz Majewski
2015-01-14 18:48 ` Eduardo Valentin
2015-01-14 13:41 ` [PATCH v3 06/16] arm: dts: Adding CPU cooling binding for Exynos SoCs Lukasz Majewski
2015-01-14 18:57 ` Eduardo Valentin
2015-01-14 13:41 ` [PATCH v3 07/16] thermal: exynos: Modify exynos thermal code to use device tree for cpu cooling configuration Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 08/16] thermal: exynos: dts: Add default definition of the TMU sensor parameter Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 09/16] dts: Documentation: Extending documentation entry for exynos-thermal Lukasz Majewski
2015-01-14 18:52 ` Eduardo Valentin
2015-01-14 19:01 ` Eduardo Valentin
2015-01-14 13:41 ` [PATCH v3 10/16] thermal: dts: Default trip points definition for Exynos5420 SoCs Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 11/16] thermal: exynos: dts: Define default thermal-zones for Exynos4 Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 12/16] thermal: dts: exynos: Trip points and sensor configuration data for Exynos5440 Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 13/16] thermal: exynos: dts: Provide device tree bindings identical to the one in exynos_tmu_data.c Lukasz Majewski
2015-01-14 19:05 ` Eduardo Valentin
2015-01-15 16:03 ` Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 14/16] thermal: samsung: core: Exynos TMU rework to use device tree for configuration Lukasz Majewski
2015-01-14 18:46 ` Eduardo Valentin
2015-01-15 15:17 ` Lukasz Majewski
2015-01-21 1:23 ` Eduardo Valentin
2015-01-21 8:10 ` Lukasz Majewski
2015-01-21 9:20 ` Eduardo Valentin
2015-01-22 14:17 ` Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 15/16] thermal: exynos: Remove exynos_thermal_common.[c|h] files Lukasz Majewski
2015-01-14 13:41 ` [PATCH v3 16/16] thermal: exynos: Remove exynos_tmu_data.c file Lukasz Majewski
2015-01-16 0:00 ` [PATCH v3 00/16] thermal: exynos: Thermal code rework to use device tree Tobias Jakobi
2015-01-16 8:29 ` Lukasz Majewski
2015-01-19 23:29 ` Tobias Jakobi
2015-01-20 8:17 ` Lukasz Majewski
2015-01-22 1:06 ` Tobias Jakobi
2015-01-21 9:08 ` Eduardo Valentin
2015-01-24 1:00 ` Tobias Jakobi
2015-01-16 11:30 ` [PATCH v4 00/17] " Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 01/17] thermal: exynos: cosmetic: Correct comment format Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 02/17] thermal: exynos: Provide thermal_exynos.h file to be included in device tree files Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 03/17] arm: dts: trats: Enable TMU on the Exynos4210 trats device Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 04/17] arm: dts: odroid: Add LD010 regulator node necessary for TMU on Odroid Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 05/17] arm: dts: odroid: Enable TMU at Exynos4412 based Odroid U3 device Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 06/17] arm: dts: Adding CPU cooling binding for Exynos SoCs Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 07/17] thermal: exynos: Modify exynos thermal code to use device tree for cpu cooling configuration Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 08/17] thermal: exynos: dts: Add default definition of the TMU sensor parameter Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 09/17] dts: Documentation: Extending documentation entry for exynos-thermal Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 10/17] thermal: dts: Default trip points definition for Exynos5420 SoCs Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 11/17] thermal: exynos: dts: Define default thermal-zones for Exynos4 Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 12/17] thermal: dts: exynos: Trip points and sensor configuration data for Exynos5440 Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 13/17] dts: Documentation: Update exynos-thermal.txt example " Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 14/17] thermal: exynos: dts: Provide device tree bindings identical to the one in exynos_tmu_data.c Lukasz Majewski
2015-01-16 11:30 ` [PATCH v4 15/17] thermal: samsung: core: Exynos TMU rework to use device tree for configuration Lukasz Majewski
2015-01-16 11:31 ` [PATCH v4 16/17] thermal: exynos: Remove exynos_thermal_common.[c|h] files Lukasz Majewski
2015-01-16 11:31 ` [PATCH v4 17/17] thermal: exynos: Remove exynos_tmu_data.c file Lukasz Majewski
2015-01-17 7:17 ` [PATCH v4 00/17] thermal: exynos: Thermal code rework to use device tree Abhilash Kesavan
2015-01-19 7:57 ` Lukasz Majewski
2015-01-23 7:42 ` Kukjin Kim
2015-01-23 9:59 ` Lukasz Majewski
2015-01-23 11:00 ` Kukjin Kim
2015-01-23 14:45 ` Eduardo Valentin
2015-01-24 4:04 ` Kukjin Kim
2015-01-19 11:20 ` [PATCH v5 00/18] " Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 01/18] thermal: exynos: cosmetic: Correct comment format Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 02/18] thermal: exynos: Provide thermal_exynos.h file to be included in device tree files Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 03/18] arm: dts: trats: Enable TMU on the Exynos4210 trats device Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 04/18] arm: dts: odroid: Add LDO10 regulator node necessary for TMU on Odroid Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 05/18] arm: dts: odroid: Enable TMU at Exynos4412 based Odroid U3 device Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 06/18] arm: dts: Adding CPU cooling binding for Exynos SoCs Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 07/18] thermal: exynos: Modify exynos thermal code to use device tree for cpu cooling configuration Lukasz Majewski
2015-01-21 2:18 ` Eduardo Valentin
2015-01-21 8:21 ` Lukasz Majewski
2015-01-21 8:33 ` Lukasz Majewski
2015-01-21 9:08 ` Viresh Kumar
2015-01-21 9:47 ` Lukasz Majewski
2015-01-21 9:55 ` Viresh Kumar
2015-01-21 10:09 ` Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 08/18] thermal: exynos: dts: Add default definition of the TMU sensor parameter Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 09/18] dts: Documentation: Extending documentation entry for exynos-thermal Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 10/18] thermal: dts: Default trip points definition for Exynos5420 SoCs Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 11/18] thermal: exynos: dts: Define default thermal-zones for Exynos4 Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 12/18] thermal: dts: exynos: Trip points and sensor configuration data for Exynos5440 Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 13/18] dts: Documentation: Update exynos-thermal.txt example " Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 14/18] thermal: exynos: dts: Provide device tree bindings identical to the one in exynos_tmu_data.c Lukasz Majewski
2015-01-19 11:20 ` [PATCH v5 15/18] thermal: samsung: core: Exynos TMU rework to use device tree for configuration Lukasz Majewski
2015-01-21 3:18 ` Eduardo Valentin
2015-01-21 8:40 ` Lukasz Majewski
2015-01-21 9:14 ` Eduardo Valentin [this message]
2015-01-21 3:25 ` Eduardo Valentin
2015-01-21 8:48 ` Lukasz Majewski
2015-01-19 11:21 ` [PATCH v5 16/18] thermal: exynos: Remove exynos_thermal_common.[c|h] files Lukasz Majewski
2015-01-19 11:21 ` [PATCH v5 17/18] thermal: exynos: Remove exynos_tmu_data.c file Lukasz Majewski
2015-01-19 11:21 ` [PATCH v5 18/18] thermal: exynos: Remove not needed exynos_tmu_init_data declarations from exynos_tmu.h Lukasz Majewski
2015-01-21 3:30 ` Eduardo Valentin
2015-01-21 9:00 ` Lukasz Majewski
2015-01-21 1:55 ` [PATCH v5 00/18] thermal: exynos: Thermal code rework to use device tree Eduardo Valentin
2015-01-23 12:09 ` [PATCH v6 " Lukasz Majewski
2015-01-23 12:09 ` [PATCH v6 01/18] thermal: exynos: cosmetic: Correct comment format Lukasz Majewski
2015-01-23 12:09 ` [PATCH v6 02/18] thermal: exynos: Provide thermal_exynos.h file to be included in device tree files Lukasz Majewski
2015-01-23 12:09 ` [PATCH v6 03/18] arm: dts: trats: Enable TMU on the Exynos4210 trats device Lukasz Majewski
2015-01-23 12:09 ` [PATCH v6 04/18] arm: dts: odroid: Add LDO10 regulator node necessary for TMU on Odroid Lukasz Majewski
2015-01-23 12:09 ` [PATCH v6 05/18] arm: dts: odroid: Enable TMU at Exynos4412 based Odroid U3 device Lukasz Majewski
2015-01-23 12:23 ` Aw: " Tobias Jakobi
2015-01-23 12:09 ` [PATCH v6 06/18] arm: dts: Adding CPU cooling binding for Exynos SoCs Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 07/18] thermal: exynos: Modify exynos thermal code to use device tree for cpu cooling configuration Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 09/18] thermal: exynos: dts: Add default definition of the TMU sensor parameter Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 10/18] dts: Documentation: Extending documentation entry for exynos-thermal Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 11/18] thermal: dts: Default trip points definition for Exynos5420 SoCs Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 12/18] thermal: exynos: dts: Define default thermal-zones for Exynos4 Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 13/18] thermal: dts: exynos: Trip points and sensor configuration data for Exynos5440 Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 14/18] dts: Documentation: Update exynos-thermal.txt example " Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 15/18] thermal: exynos: dts: Provide device tree bindings identical to the one in exynos_tmu_data.c Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 16/18] thermal: samsung: core: Exynos TMU rework to use device tree for configuration Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 17/18] thermal: exynos: Remove exynos_thermal_common.[c|h] files Lukasz Majewski
2015-01-23 12:10 ` [PATCH v6 18/18] thermal: exynos: Remove exynos_tmu_data.c file Lukasz Majewski
2015-01-24 21:49 ` [PATCH v6 00/18] thermal: exynos: Thermal code rework to use device tree Eduardo Valentin
2015-01-26 8:49 ` Lukasz Majewski
2015-01-29 23:34 ` Kukjin Kim
2015-02-23 10:13 ` Lukasz Majewski
2015-02-23 11:18 ` Kukjin Kim
2015-02-23 12:28 ` Lukasz Majewski
2015-02-26 15:56 ` Lukasz Majewski
2015-02-26 21:21 ` Kukjin Kim
2015-01-23 12:14 ` [PATCH v6 08/18] cpufreq: exynos: Use device tree to determine if cpufreq cooling should be registered Lukasz Majewski
2015-01-23 12:59 ` Viresh Kumar
2015-01-23 13:57 ` Lukasz Majewski
2015-01-25 14:01 ` Viresh Kumar
2015-01-25 16:27 ` Lukasz Majewski
2015-01-25 16:46 ` Eduardo Valentin
2015-01-25 21:55 ` Lukasz Majewski
2015-01-26 9:25 ` [PATCH] cpufreq: exynos: Use simple approach to asses if cpu cooling can be used Lukasz Majewski
2015-01-27 3:44 ` Viresh Kumar
2015-02-04 9:00 ` Lukasz Majewski
2015-02-05 15:54 ` [PATCH v2] " Lukasz Majewski
2015-02-26 10:36 ` Lukasz Majewski
2015-02-26 18:25 ` Eduardo Valentin
2015-02-26 21:23 ` Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150121091412.GD13468@developer.hsd1.ca.comcast.net \
--to=edubezval@gmail.com \
--cc=a.kesavan@samsung.com \
--cc=amit.daniel@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=kesavan.abhilash@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=kgene@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=l.majewski@majess.pl \
--cc=l.majewski@samsung.com \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).