Re: [PATCH v6 00/18] thermal: exynos: Thermal code rework to use device tree

[Lukasz Majewski <l.majewski@samsung.com>]

Hi Kukjin,

> Lukasz Majewski wrote:
> > 
> > Hi Kukjin, Eduardo
> > 
> Hi,
> 
> > > On 01/25/15 06:49, Eduardo Valentin wrote:
> > > > On Fri, Jan 23, 2015 at 01:09:53PM +0100, Lukasz Majewski wrote:
> > > >> 1. Introduction
> > > >>
> > > >> Following patches aim to clean up the current implementation of
> > > >> the thermal framework on Exynos devices.
> > > >>
> > > >> The main goal was to use a generic code for reading thermal
> > > >> configuration (of-thermal.c). Due to that redundant
> > > >> exynos_thermal_common.[h|c] files were removed.
> > > >>
> > > >> Around 400 lines of code (LOC) were removed directly by this
> > > >> patch, which is around 20% of the Exynos thermal code base.
> > > >>
> > > >> This work should NOT bring any functional changes to Exynos
> > > >> thermal subsystem.
> > > >>
> > > >> 2. Patch-set structure
> > > >>
> > > >> Then the cpu_cooling functionality has been preserved to allow
> > > >> cooling devices by reducing operating frequency. Definition of
> > > >> trip points and cpufreq's cooling properties were moved to
> > > >> device tree.
> > > >>
> > > >> Then the rework of the way in which configuration data is
> > > >> provided to the Exynos thermal subsystem was performed. Now
> > > >> device tree is used for configuration.
> > > >>
> > > >> 3. Dead code removal
> > > >>
> > > >> Thermal support for some SoCs, previously available in the
> > > >> exynos_tmu_data.c file, was removed since, as of (almost)
> > > >> 3.19-rc3, they didn't have TMU bindings.
> > > >>
> > > >> Moreover, support for cpu_cooling devices was preserved only on
> > > >> those SoCs which had available and working cpufreq driver.
> > > >>
> > > >> 4. Testing
> > > >>
> > > >> Test devices:
> > > >> - Exynos4210 - Trats (TMU zone + cpu_cooling)
> > > >> - Exynos4412 - Trats2/Odroid U3 (TMU zone + cpu_cooling)
> > > >> - Exynos5250 - Arndale (TMU zone + cpu_cooling)
> > > >> - Exynos5420 - Arndale-octa (only TMU zones)
> > > >>
> > > >> Unfortunately, I don't posses Exynos5440 for testing. Its
> > > >> functionality has been preserved in the code, but not tested on
> > > >> the hardware. I would be grateful for help in testing.
> > > >>
> > > >>
> > > >> 5. This work apply on the following tree:
> > > >>
> > > >> kernel.org: 'linux-soc-thermal/next' - Eduardo Velentin's tree
> > > >> SHA1: 1813d80874699145f04af6b05ebab0a6419001fb
> > > >>
> > > >>
> > > >> Lukasz Majewski (18):
> > > >
> > > > I have applied the following patches to my -fixes branch (for
> > > > next rc cycle)
> > > >
> > > >>   thermal: exynos: cosmetic: Correct comment format
> > > >>   thermal: exynos: Provide thermal_exynos.h file to be
> > > >> included in device tree files
> > > >>   thermal: exynos: Modify exynos thermal code to use device
> > > >> tree for cpu cooling configuration
> > > >>   cpufreq: exynos: Use device tree to determine if cpufreq
> > > >> cooling should be registered
> > > >>   dts: Documentation: Extending documentation entry for
> > > >> exynos-thermal dts: Documentation: Update exynos-thermal.txt
> > > >> example for Exynos5440 thermal: samsung: core: Exynos TMU
> > > >> rework to use device tree for configuration
> > > >>   thermal: exynos: Remove exynos_thermal_common.[c|h] files
> > > >>   thermal: exynos: Remove exynos_tmu_data.c file
> > > >
> > > > The patches below should go via platform tree:
> > > >
> > > >>   arm: dts: trats: Enable TMU on the Exynos4210 trats device
> > > >>   arm: dts: odroid: Add LDO10 regulator node necessary for TMU
> > > >> on Odroid arm: dts: odroid: Enable TMU at Exynos4412 based
> > > >> Odroid U3 device arm: dts: Adding CPU cooling binding for
> > > >> Exynos SoCs thermal: exynos: dts: Add default definition of
> > > >> the TMU sensor parameter
> > > >>   thermal: dts: Default trip points definition for Exynos5420
> > > >> SoCs thermal: exynos: dts: Define default thermal-zones for
> > > >> Exynos4 thermal: dts: exynos: Trip points and sensor
> > > >> configuration data for Exynos5440
> > > >>   thermal: exynos: dts: Provide device tree bindings identical
> > > >> to the one in exynos_tmu_data.c
> > > >
> > >
> > > I've applied above patches with small subject changes.
> > >
> > > BTW unfortunately, since missing the
> > > "include/dt-bindings/thermal/thermal_exynos.h" in my tree, I
> > > couldn't merge it into for-next yet.
> > 
> > As of this writing: (Kernel 4.0-rc1) the
> > "include/dt-bindings/thermal/thermal_exynos.h" file is in the kernel
> > tree.
> > 
> I know.
> 
> > Kukjin, could you add missing DTS files and send this to upstream.
> > 
> Unfortunately, I couldn't take the DT changes in Samsung tree at that
> time because of missing header file and it causes build error. Now I
> can pick them into Samsung tree but I'm not sure it can be sent to
> upstream during this -rc...
> 
> Eduardo, Lukasz,
> Do you guys think the DT changes are really fixes for 4.0?

I've created following repository with DTS files:

https://github.com/lmajewski/linux-samsung-thermal.git

Branch: devel.

On top of the v4.0-rc1 tag you will find all necessary patches for
fixing thermal regression at Samsung Exynos boards.

I hope, that organizing all patches in a separate repository will
facilitate and speed up the inclusion process.


> 
> > Thanks in advance.
> > 
> > >
> > > Can you please provide a topic branch for it? If not, this cannot
> > > be handled in arm-soc tree in this time, I think.
> > >
> > > - Kukjin
> 



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group