From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lina Iyer Subject: Re: [RFC 5/7] arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes Date: Thu, 23 Apr 2015 10:51:46 -0600 Message-ID: <20150423165146.GB555@linaro.org> References: <1429796773-7151-1-git-send-email-rnayak@codeaurora.org> <1429796773-7151-6-git-send-email-rnayak@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Return-path: Received: from mail-pd0-f175.google.com ([209.85.192.175]:34106 "EHLO mail-pd0-f175.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030231AbbDWQvt (ORCPT ); Thu, 23 Apr 2015 12:51:49 -0400 Received: by pdbqa5 with SMTP id qa5so23190171pdb.1 for ; Thu, 23 Apr 2015 09:51:49 -0700 (PDT) Content-Disposition: inline In-Reply-To: <1429796773-7151-6-git-send-email-rnayak@codeaurora.org> Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: Rajendra Nayak Cc: linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org, sboyd@codeaurora.org, srinivas.kandagatla@linaro.org, nrajan@codeaurora.org On Thu, Apr 23 2015 at 07:52 -0600, Rajendra Nayak wrote: >Add thermal zones, tsens and eeprom nodes I dont see corresponding patches for 8084 and 8916. -- Lina > >Signed-off-by: Rajendra Nayak >--- > arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 105 insertions(+) > >diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi >index e265ec1..5716e89 100644 >--- a/arch/arm/boot/dts/qcom-msm8974.dtsi >+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi >@@ -57,6 +57,88 @@ > }; > }; > >+ thermal-zones { >+ cpu-thermal0 { >+ polling-delay-passive = <250>; >+ polling-delay = <1000>; >+ >+ thermal-sensors = <&tsens 5>; >+ >+ trips { >+ cpu_alert0: trip@0 { >+ temperature = <100000>; >+ hysteresis = <2000>; >+ type = "passive"; >+ }; >+ cpu_crit0: trip@1 { >+ temperature = <125000>; >+ hysteresis = <2000>; >+ type = "critical"; >+ }; >+ }; >+ }; >+ >+ cpu-thermal1 { >+ polling-delay-passive = <250>; >+ polling-delay = <1000>; >+ >+ thermal-sensors = <&tsens 6>; >+ >+ trips { >+ cpu_alert1: trip@0 { >+ temperature = <100000>; >+ hysteresis = <2000>; >+ type = "passive"; >+ }; >+ cpu_crit1: trip@1 { >+ temperature = <125000>; >+ hysteresis = <2000>; >+ type = "critical"; >+ }; >+ }; >+ }; >+ >+ cpu-thermal2 { >+ polling-delay-passive = <250>; >+ polling-delay = <1000>; >+ >+ thermal-sensors = <&tsens 7>; >+ >+ trips { >+ cpu_alert2: trip@0 { >+ temperature = <100000>; >+ hysteresis = <2000>; >+ type = "passive"; >+ }; >+ cpu_crit2: trip@1 { >+ temperature = <125000>; >+ hysteresis = <2000>; >+ type = "critical"; >+ }; >+ }; >+ }; >+ >+ cpu-thermal3 { >+ polling-delay-passive = <250>; >+ polling-delay = <1000>; >+ >+ thermal-sensors = <&tsens 8>; >+ >+ trips { >+ cpu_alert3: trip@0 { >+ temperature = <100000>; >+ hysteresis = <2000>; >+ type = "passive"; >+ }; >+ cpu_crit3: trip@1 { >+ temperature = <125000>; >+ hysteresis = <2000>; >+ type = "critical"; >+ }; >+ }; >+ }; >+ }; >+ > cpu-pmu { > compatible = "qcom,krait-pmu"; > interrupts = <1 7 0xf04>; >@@ -85,6 +167,29 @@ > <0xf9002000 0x1000>; > }; > >+ qfprom: qfprom@fc4bc000 { >+ #address-cells = <1>; >+ #size-cells = <1>; >+ compatible = "qcom,qfprom"; >+ reg = <0xfc4bc000 0x1000>; >+ tsens_calib: calib@d0 { >+ reg = <0xd0 0x18>; >+ }; >+ tsens_backup: backup@440 { >+ reg = <0x440 0x10>; >+ }; >+ }; >+ >+ tsens: thermal-sensor@fc4a8000 { >+ compatible = "qcom,msm8974-tsens"; >+ reg = <0xfc4a8000 0x2000>; >+ calib = <&tsens_calib>; >+ calib_backup = <&tsens_backup>; >+ qcom,tsens-slopes = <3200 3200 3200 3200 3200 3200 >+ 3200 3200 3200 3200 3200>; >+ #thermal-sensor-cells = <1>; >+ }; >+ > timer@f9020000 { > #address-cells = <1>; > #size-cells = <1>; >-- >QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member >of Code Aurora Forum, hosted by The Linux Foundation >