linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] thermal: rockhip: fix setting thermal shutdown polarity
@ 2015-08-07 21:00 Dmitry Torokhov
  2015-08-10  6:34 ` Caesar Wang
  0 siblings, 1 reply; 3+ messages in thread
From: Dmitry Torokhov @ 2015-08-07 21:00 UTC (permalink / raw)
  To: Heiko Stuebner
  Cc: Eduardo Valentin, Caesar Wang, dianders, linux-pm,
	linux-arm-kernel, linux-rockchip, linux-kernel

When requested thermal shutdown signal polarity is low we need to make
sure that the bit representing high level of signal is reset, and not
set all other bits in that register.

Also rename TSADCV2_INT_PD_CLEAR to TSADCV2_INT_PD_CLEAR_MASK to better
reflect its nature.

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
---
 drivers/thermal/rockchip_thermal.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 93ee307..4d5b7d4 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -106,16 +106,14 @@ struct rockchip_thermal_data {
 #define TSADCV2_AUTO_PERIOD_HT			0x6c
 
 #define TSADCV2_AUTO_EN				BIT(0)
-#define TSADCV2_AUTO_DISABLE			~BIT(0)
 #define TSADCV2_AUTO_SRC_EN(chn)		BIT(4 + (chn))
 #define TSADCV2_AUTO_TSHUT_POLARITY_HIGH	BIT(8)
-#define TSADCV2_AUTO_TSHUT_POLARITY_LOW		~BIT(8)
 
 #define TSADCV2_INT_SRC_EN(chn)			BIT(chn)
 #define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
 #define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
 
-#define TSADCV2_INT_PD_CLEAR			~BIT(8)
+#define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
 
 #define TSADCV2_DATA_MASK			0xfff
 #define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT	4
@@ -244,10 +242,10 @@ static void rk_tsadcv2_initialize(void __iomem *regs,
 				  enum tshut_polarity tshut_polarity)
 {
 	if (tshut_polarity == TSHUT_HIGH_ACTIVE)
-		writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_HIGH),
+		writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
 			       regs + TSADCV2_AUTO_CON);
 	else
-		writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_LOW),
+		writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
 			       regs + TSADCV2_AUTO_CON);
 
 	writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
@@ -264,7 +262,7 @@ static void rk_tsadcv2_irq_ack(void __iomem *regs)
 	u32 val;
 
 	val = readl_relaxed(regs + TSADCV2_INT_PD);
-	writel_relaxed(val & TSADCV2_INT_PD_CLEAR, regs + TSADCV2_INT_PD);
+	writel_relaxed(val & TSADCV2_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
 }
 
 static void rk_tsadcv2_control(void __iomem *regs, bool enable)
-- 
2.5.0.rc2.392.g76e840b


-- 
Dmitry

^ permalink raw reply related	[flat|nested] 3+ messages in thread
* Re: [PATCH] thermal: rockhip: fix setting thermal shutdown polarity
  2015-08-07 21:00 [PATCH] thermal: rockhip: fix setting thermal shutdown polarity Dmitry Torokhov
@ 2015-08-10  6:34 ` Caesar Wang
  2015-08-10  6:37   ` Caesar Wang
  0 siblings, 1 reply; 3+ messages in thread
From: Caesar Wang @ 2015-08-10  6:34 UTC (permalink / raw)
  To: Dmitry Torokhov, Heiko Stuebner
  Cc: linux-pm-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	dianders-F7+t8E8rja9g9hUCZPvPmw, Eduardo Valentin,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

Dear Dmitry,

Thanks to work for it.

在 2015年08月08日 05:00, Dmitry Torokhov 写道:
> When requested thermal shutdown signal polarity is low we need to make
> sure that the bit representing high level of signal is reset, and not
> set all other bits in that register.
>
> Also rename TSADCV2_INT_PD_CLEAR to TSADCV2_INT_PD_CLEAR_MASK to better
> reflect its nature.
>
> Signed-off-by: Dmitry Torokhov <dtor@chromium.org>

  Acked-by: Caesar Wang <wxt@rock-chips.com>

--
Thanks,
Caesar

> ---
>   drivers/thermal/rockchip_thermal.c | 10 ++++------
>   1 file changed, 4 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
> index 93ee307..4d5b7d4 100644
> --- a/drivers/thermal/rockchip_thermal.c
> +++ b/drivers/thermal/rockchip_thermal.c
> @@ -106,16 +106,14 @@ struct rockchip_thermal_data {
>   #define TSADCV2_AUTO_PERIOD_HT			0x6c
>   
>   #define TSADCV2_AUTO_EN				BIT(0)
> -#define TSADCV2_AUTO_DISABLE			~BIT(0)
>   #define TSADCV2_AUTO_SRC_EN(chn)		BIT(4 + (chn))
>   #define TSADCV2_AUTO_TSHUT_POLARITY_HIGH	BIT(8)
> -#define TSADCV2_AUTO_TSHUT_POLARITY_LOW		~BIT(8)
>   
>   #define TSADCV2_INT_SRC_EN(chn)			BIT(chn)
>   #define TSADCV2_SHUT_2GPIO_SRC_EN(chn)		BIT(4 + (chn))
>   #define TSADCV2_SHUT_2CRU_SRC_EN(chn)		BIT(8 + (chn))
>   
> -#define TSADCV2_INT_PD_CLEAR			~BIT(8)
> +#define TSADCV2_INT_PD_CLEAR_MASK		~BIT(8)
>   
>   #define TSADCV2_DATA_MASK			0xfff
>   #define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT	4
> @@ -244,10 +242,10 @@ static void rk_tsadcv2_initialize(void __iomem *regs,
>   				  enum tshut_polarity tshut_polarity)
>   {
>   	if (tshut_polarity == TSHUT_HIGH_ACTIVE)
> -		writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_HIGH),
> +		writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
>   			       regs + TSADCV2_AUTO_CON);
>   	else
> -		writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_LOW),
> +		writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
>   			       regs + TSADCV2_AUTO_CON);
>   
>   	writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
> @@ -264,7 +262,7 @@ static void rk_tsadcv2_irq_ack(void __iomem *regs)
>   	u32 val;
>   
>   	val = readl_relaxed(regs + TSADCV2_INT_PD);
> -	writel_relaxed(val & TSADCV2_INT_PD_CLEAR, regs + TSADCV2_INT_PD);
> +	writel_relaxed(val & TSADCV2_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
>   }
>   
>   static void rk_tsadcv2_control(void __iomem *regs, bool enable)



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply	[flat|nested] 3+ messages in thread
* Re: [PATCH] thermal: rockhip: fix setting thermal shutdown polarity
  2015-08-10  6:34 ` Caesar Wang
@ 2015-08-10  6:37   ` Caesar Wang
  0 siblings, 0 replies; 3+ messages in thread
From: Caesar Wang @ 2015-08-10  6:37 UTC (permalink / raw)
  To: Dmitry Torokhov, Heiko Stuebner
  Cc: Eduardo Valentin, dianders, linux-pm, linux-arm-kernel,
	linux-rockchip, linux-kernel

Sorry, forgot it!
\s 'rockhip' to 'rockchip' :-)

在 2015年08月10日 14:34, Caesar Wang 写道:
> Dear Dmitry,
>
> Thanks to work for it.
>
> 在 2015年08月08日 05:00, Dmitry Torokhov 写道:
>> When requested thermal shutdown signal polarity is low we need to make
>> sure that the bit representing high level of signal is reset, and not
>> set all other bits in that register.
>>
>> Also rename TSADCV2_INT_PD_CLEAR to TSADCV2_INT_PD_CLEAR_MASK to better
>> reflect its nature.
>>
>> Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
>
>  Acked-by: Caesar Wang <wxt@rock-chips.com>
>
> -- 
> Thanks,
> Caesar
>
>> ---
>>   drivers/thermal/rockchip_thermal.c | 10 ++++------
>>   1 file changed, 4 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/thermal/rockchip_thermal.c 
>> b/drivers/thermal/rockchip_thermal.c
>> index 93ee307..4d5b7d4 100644
>> --- a/drivers/thermal/rockchip_thermal.c
>> +++ b/drivers/thermal/rockchip_thermal.c
>> @@ -106,16 +106,14 @@ struct rockchip_thermal_data {
>>   #define TSADCV2_AUTO_PERIOD_HT            0x6c
>>     #define TSADCV2_AUTO_EN                BIT(0)
>> -#define TSADCV2_AUTO_DISABLE            ~BIT(0)
>>   #define TSADCV2_AUTO_SRC_EN(chn)        BIT(4 + (chn))
>>   #define TSADCV2_AUTO_TSHUT_POLARITY_HIGH    BIT(8)
>> -#define TSADCV2_AUTO_TSHUT_POLARITY_LOW        ~BIT(8)
>>     #define TSADCV2_INT_SRC_EN(chn)            BIT(chn)
>>   #define TSADCV2_SHUT_2GPIO_SRC_EN(chn)        BIT(4 + (chn))
>>   #define TSADCV2_SHUT_2CRU_SRC_EN(chn)        BIT(8 + (chn))
>>   -#define TSADCV2_INT_PD_CLEAR            ~BIT(8)
>> +#define TSADCV2_INT_PD_CLEAR_MASK        ~BIT(8)
>>     #define TSADCV2_DATA_MASK            0xfff
>>   #define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT    4
>> @@ -244,10 +242,10 @@ static void rk_tsadcv2_initialize(void __iomem 
>> *regs,
>>                     enum tshut_polarity tshut_polarity)
>>   {
>>       if (tshut_polarity == TSHUT_HIGH_ACTIVE)
>> -        writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_HIGH),
>> +        writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
>>                      regs + TSADCV2_AUTO_CON);
>>       else
>> -        writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_LOW),
>> +        writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
>>                      regs + TSADCV2_AUTO_CON);
>>         writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + 
>> TSADCV2_AUTO_PERIOD);
>> @@ -264,7 +262,7 @@ static void rk_tsadcv2_irq_ack(void __iomem *regs)
>>       u32 val;
>>         val = readl_relaxed(regs + TSADCV2_INT_PD);
>> -    writel_relaxed(val & TSADCV2_INT_PD_CLEAR, regs + TSADCV2_INT_PD);
>> +    writel_relaxed(val & TSADCV2_INT_PD_CLEAR_MASK, regs + 
>> TSADCV2_INT_PD);
>>   }
>>     static void rk_tsadcv2_control(void __iomem *regs, bool enable)
>

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-08-10  6:37 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-07 21:00 [PATCH] thermal: rockhip: fix setting thermal shutdown polarity Dmitry Torokhov
2015-08-10  6:34 ` Caesar Wang
2015-08-10  6:37   ` Caesar Wang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).