From: "Pali Rohár" <pali.rohar@gmail.com>
To: "Andrew F. Davis" <afd@ti.com>
Cc: Sebastian Reichel <sre@kernel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Dan Murphy <dmurphy@ti.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 4/7] power: bq27xxx_battery: Fix typos and change naming for state of charge functions
Date: Mon, 21 Sep 2015 10:36:31 +0200 [thread overview]
Message-ID: <20150921083631.GG20113@pali> (raw)
In-Reply-To: <1442265973-32261-5-git-send-email-afd@ti.com>
On Monday 14 September 2015 16:26:10 Andrew F. Davis wrote:
> Fix typos and change "relative state of charge" to "state of charge" as not
> all supported devices use relative state of charge.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
> ---
> drivers/power/bq27xxx_battery.c | 28 ++++++++++++++--------------
> 1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/power/bq27xxx_battery.c b/drivers/power/bq27xxx_battery.c
> index 0734413..1ff88ad 100644
> --- a/drivers/power/bq27xxx_battery.c
> +++ b/drivers/power/bq27xxx_battery.c
> @@ -229,26 +229,26 @@ static bool bq27xxx_is_chip_version_higher(struct bq27xxx_device_info *di)
> }
>
> /*
> - * Return the battery Relative State-of-Charge
> + * Return the battery State-of-Charge
> * Or < 0 if something fails.
> */
> -static int bq27xxx_battery_read_rsoc(struct bq27xxx_device_info *di)
> +static int bq27xxx_battery_read_soc(struct bq27xxx_device_info *di)
> {
> - int rsoc;
> + int soc;
>
> if (di->chip == BQ27500 || di->chip == BQ27742)
> - rsoc = bq27xxx_read(di, BQ27500_REG_SOC, false);
> + soc = bq27xxx_read(di, BQ27500_REG_SOC, false);
> else if (di->chip == BQ27510)
> - rsoc = bq27xxx_read(di, BQ27510_REG_SOC, false);
> + soc = bq27xxx_read(di, BQ27510_REG_SOC, false);
> else if (di->chip == BQ27425)
> - rsoc = bq27xxx_read(di, BQ27425_REG_SOC, false);
> - else
> - rsoc = bq27xxx_read(di, BQ27000_REG_RSOC, true);
> + soc = bq27xxx_read(di, BQ27425_REG_SOC, false);
> + else /* for the bq27000 we read the "relative" SoC register */
> + soc = bq27xxx_read(di, BQ27000_REG_RSOC, true);
>
> - if (rsoc < 0)
> - dev_dbg(di->dev, "error reading relative State-of-Charge\n");
> + if (soc < 0)
> + dev_dbg(di->dev, "error reading State-of-Charge\n");
>
> - return rsoc;
> + return soc;
> }
>
> /*
> @@ -275,7 +275,7 @@ static int bq27xxx_battery_read_charge(struct bq27xxx_device_info *di, u8 reg)
> }
>
> /*
> - * Return the battery Nominal available capaciy in µAh
> + * Return the battery Nominal available capacity in µAh
> * Or < 0 if something fails.
> */
> static inline int bq27xxx_battery_read_nac(struct bq27xxx_device_info *di)
> @@ -416,7 +416,7 @@ static int bq27xxx_battery_read_time(struct bq27xxx_device_info *di, u8 reg)
> }
>
> /*
> - * Read a power avg register.
> + * Read an average power register.
> * Return < 0 if something fails.
> */
> static int bq27xxx_battery_read_pwr_avg(struct bq27xxx_device_info *di, u8 reg)
> @@ -498,7 +498,7 @@ static void bq27xxx_battery_update(struct bq27xxx_device_info *di)
> cache.charge_full = -ENODATA;
> cache.health = -ENODATA;
> } else {
> - cache.capacity = bq27xxx_battery_read_rsoc(di);
> + cache.capacity = bq27xxx_battery_read_soc(di);
> if (is_bq27742 || is_bq27510)
> cache.time_to_empty =
> bq27xxx_battery_read_time(di,
--
Pali Rohár
pali.rohar@gmail.com
next prev parent reply other threads:[~2015-09-21 8:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-14 21:26 [PATCH v4 0/7] Add support for additional bq27xxx devices Andrew F. Davis
2015-09-14 21:26 ` [PATCH v4 1/7] power: bq27x00_battery: Remove unneeded i2c MODULE_ALIAS Andrew F. Davis
2015-09-21 8:33 ` Pali Rohár
2015-09-22 15:18 ` Sebastian Reichel
2015-09-14 21:26 ` [PATCH v4 2/7] power: bq27x00_battery: Renaming for consistency Andrew F. Davis
2015-09-15 8:32 ` Laurentiu Palcu
2015-09-15 16:53 ` Andrew F. Davis
2015-09-22 16:10 ` Sebastian Reichel
2015-09-14 21:26 ` [PATCH v4 3/7] power: bq27xxx_battery: Platform initialization must declare a device Andrew F. Davis
2015-09-21 8:41 ` Pali Rohár
2015-09-21 18:40 ` Andrew F. Davis
2015-09-14 21:26 ` [PATCH v4 4/7] power: bq27xxx_battery: Fix typos and change naming for state of charge functions Andrew F. Davis
2015-09-21 8:36 ` Pali Rohár [this message]
2015-09-14 21:26 ` [PATCH v4 5/7] power: bq27xxx_battery: Add support for additional bq27xxx family devices Andrew F. Davis
2015-09-21 8:46 ` Pali Rohár
2015-09-21 19:02 ` Andrew F. Davis
2015-09-14 21:26 ` [PATCH v4 6/7] power: bq27xxx_battery: Cleanup health checking Andrew F. Davis
2015-09-21 8:35 ` Pali Rohár
2015-09-14 21:26 ` [PATCH v4 7/7] power: bq27xxx_battery: Add interrupt handling support Andrew F. Davis
2015-09-15 18:47 ` Andreas Dannenberg
2015-09-15 20:53 ` Andrew F. Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150921083631.GG20113@pali \
--to=pali.rohar@gmail.com \
--cc=afd@ti.com \
--cc=dbaryshkov@gmail.com \
--cc=dmurphy@ti.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).