From: Rob Herring <robh@kernel.org>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Simon <horms@verge.net.au>, Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Magnus <magnus.damm@gmail.com>,
linux-sh@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: Re: [PATCH 5/8 v3] thermal: rcar: enable to use thermal-zone on DT
Date: Tue, 8 Dec 2015 09:20:10 -0600 [thread overview]
Message-ID: <20151208152010.GA25452@rob-hp-laptop> (raw)
In-Reply-To: <87r3iy66za.wl%kuninori.morimoto.gx@renesas.com>
On Mon, Dec 07, 2015 at 07:44:09AM +0000, Kuninori Morimoto wrote:
>
> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> This patch enables to use thermal-zone on DT if it was call as
> "renesas,rcar-thermal-gen2".
> Previous style is still supported by "renesas,rcar-thermal".
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> v2 -> v3
>
> - compatible "renesas,rcar-thermal-gen2" -> "renesas,rcar-gen2-thermal"
>
> .../devicetree/bindings/thermal/rcar-thermal.txt | 37 +++++++++++++++++-
For the binding:
Acked-by: Rob Herring <robh@kernel.org>
> drivers/thermal/rcar_thermal.c | 44 +++++++++++++++++++---
> 2 files changed, 74 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> index 332e625..601a54d 100644
> --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> @@ -1,8 +1,9 @@
> * Renesas R-Car Thermal
>
> Required properties:
> -- compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal"
> - as fallback.
> +- compatible : "renesas,thermal-<soctype>",
> + "renesas,rcar-gen2-thermal" (with thermal-zone) or
> + "renesas,rcar-thermal" (without thermal-zone) as fallback.
> Examples with soctypes are:
> - "renesas,thermal-r8a73a4" (R-Mobile APE6)
> - "renesas,thermal-r8a7779" (R-Car H1)
> @@ -36,3 +37,35 @@ thermal@e61f0000 {
> 0xe61f0300 0x38>;
> interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> +Example (with thermal-zone):
> +
> +thermal-zones {
> + cpu_thermal: cpu-thermal {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> +
> + thermal-sensors = <&thermal>;
> +
> + trips {
> + cpu-crit {
> + temperature = <1150000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + };
> + };
> +};
> +
> +thermal: thermal@e61f0000 {
> + compatible = "renesas,thermal-r8a7790",
> + "renesas,rcar-gen2-thermal",
> + "renesas,rcar-thermal";
> + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
> + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
> + power-domains = <&cpg_clocks>;
> + #thermal-sensor-cells = <0>;
> +};
> diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
> index 52493b4..a8c88f4 100644
> --- a/drivers/thermal/rcar_thermal.c
> +++ b/drivers/thermal/rcar_thermal.c
> @@ -23,6 +23,7 @@
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/module.h>
> +#include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/reboot.h>
> @@ -81,8 +82,10 @@ struct rcar_thermal_priv {
> # define rcar_force_update_temp(priv) 0
> #endif
>
> +#define USE_OF_THERMAL 1
> static const struct of_device_id rcar_thermal_dt_ids[] = {
> { .compatible = "renesas,rcar-thermal", },
> + { .compatible = "renesas,rcar-gen2-thermal", .data = (void *)USE_OF_THERMAL },
> {},
> };
> MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
> @@ -206,9 +209,8 @@ err_out_unlock:
> return ret;
> }
>
> -static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
> +static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv, int *temp)
> {
> - struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
> int tmp;
>
> if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
> @@ -233,6 +235,20 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
> return 0;
> }
>
> +static int rcar_thermal_of_get_temp(void *data, int *temp)
> +{
> + struct rcar_thermal_priv *priv = data;
> +
> + return rcar_thermal_get_current_temp(priv, temp);
> +}
> +
> +static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
> +{
> + struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
> +
> + return rcar_thermal_get_current_temp(priv, temp);
> +}
> +
> static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
> int trip, enum thermal_trip_type *type)
> {
> @@ -289,6 +305,10 @@ static int rcar_thermal_notify(struct thermal_zone_device *zone,
> return 0;
> }
>
> +static const struct thermal_zone_of_device_ops rcar_thermal_zone_of_ops = {
> + .get_temp = rcar_thermal_of_get_temp,
> +};
> +
> static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
> .get_temp = rcar_thermal_get_temp,
> .get_trip_type = rcar_thermal_get_trip_type,
> @@ -325,14 +345,20 @@ static void rcar_thermal_work(struct work_struct *work)
>
> priv = container_of(work, struct rcar_thermal_priv, work.work);
>
> - rcar_thermal_get_temp(priv->zone, &cctemp);
> + ret = rcar_thermal_get_current_temp(priv, &cctemp);
> + if (ret < 0)
> + return;
> +
> ret = rcar_thermal_update_temp(priv);
> if (ret < 0)
> return;
>
> rcar_thermal_irq_enable(priv);
>
> - rcar_thermal_get_temp(priv->zone, &nctemp);
> + ret = rcar_thermal_get_current_temp(priv, &nctemp);
> + if (ret < 0)
> + return;
> +
> if (nctemp != cctemp)
> thermal_zone_device_update(priv->zone);
> }
> @@ -410,6 +436,8 @@ static int rcar_thermal_probe(struct platform_device *pdev)
> struct rcar_thermal_priv *priv;
> struct device *dev = &pdev->dev;
> struct resource *res, *irq;
> + const struct of_device_id *of_id = of_match_device(rcar_thermal_dt_ids, dev);
> + unsigned long of_data = (unsigned long)of_id->data;
> int mres = 0;
> int i;
> int ret = -ENODEV;
> @@ -470,7 +498,13 @@ static int rcar_thermal_probe(struct platform_device *pdev)
> if (ret < 0)
> goto error_unregister;
>
> - priv->zone = thermal_zone_device_register("rcar_thermal",
> + if (of_data == USE_OF_THERMAL)
> + priv->zone = thermal_zone_of_sensor_register(
> + dev, i, priv,
> + &rcar_thermal_zone_of_ops);
> + else
> + priv->zone = thermal_zone_device_register(
> + "rcar_thermal",
> 1, 0, priv,
> &rcar_thermal_zone_ops, NULL, 0,
> idle);
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-12-08 15:20 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-07 7:42 [PATCH 0/8 v3] enable to use thermal-zone on r8a7790/1 Kuninori Morimoto
2015-12-07 7:42 ` [PATCH 1/8 v3] thermal: rcar: move rcar_thermal_dt_ids to upside Kuninori Morimoto
2015-12-07 7:43 ` [PATCH 2/8 v3] thermal: rcar: check every rcar_thermal_update_temp() return value Kuninori Morimoto
2015-12-07 7:43 ` [PATCH 3/8 v3] thermal: rcar: check irq possibility in rcar_thermal_irq_xxx() Kuninori Morimoto
2015-12-07 7:43 ` [PATCH 4/8 v3] thermal: rcar: retern error rcar_thermal_get_temp() if no ctemp update Kuninori Morimoto
2015-12-07 7:44 ` [PATCH 5/8 v3] thermal: rcar: enable to use thermal-zone on DT Kuninori Morimoto
2015-12-08 15:20 ` Rob Herring [this message]
2015-12-07 7:44 ` [PATCH 6/8 v3] ARM: shmobile: r8a7790: enable to use thermal-zone Kuninori Morimoto
[not found] ` <87poyi66yt.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2015-12-08 3:06 ` Khiem Nguyen
[not found] ` <87y4d6672t.wl%kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
2015-12-07 7:44 ` [PATCH 7/8 v3] ARM: shmobile: r8a7791: " Kuninori Morimoto
2015-12-08 3:10 ` Khiem Nguyen
2015-12-08 5:03 ` Kuninori Morimoto
2015-12-07 7:45 ` [PATCH 8/8 v3] thermal: of-thermal: of_thermal_set_trip_temp() call thermal_zone_device_update() Kuninori Morimoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151208152010.GA25452@rob-hp-laptop \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox