linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eduardo Valentin <edubezval@gmail.com>
To: Wei Ni <wni@nvidia.com>
Cc: rui.zhang@intel.com, thierry.reding@gmail.com,
	MLongnecker@nvidia.com, swarren@wwwdotorg.org,
	mikko.perttunen@kapsi.fi, linux-tegra@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH V7 10/12] thermal: tegra: add PM support
Date: Mon, 14 Mar 2016 12:23:17 -0700	[thread overview]
Message-ID: <20160314192316.GD1872@localhost.localdomain> (raw)
In-Reply-To: <1457665886-30098-1-git-send-email-wni@nvidia.com>

[-- Attachment #1: Type: text/plain, Size: 8884 bytes --]

On Fri, Mar 11, 2016 at 11:11:26AM +0800, Wei Ni wrote:
> Add suspend/resume function in soctherm driver.
> And enable it for Tegra124 and Tegra210.

I would prefer you either improve the description of changes needed to
get suspend and resume fully working or you split this patch into
smaller and properly described patches.

Looks like you need at least to:
(1) handle clocks
(2) reprogram hw trips,

right?


> 
> Signed-off-by: Wei Ni <wni@nvidia.com>
> ---
>  drivers/thermal/tegra/soctherm.c | 175 ++++++++++++++++++++++++++++-----------
>  1 file changed, 125 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
> index dbaab160baba..702d9cf3969d 100644
> --- a/drivers/thermal/tegra/soctherm.c
> +++ b/drivers/thermal/tegra/soctherm.c
> @@ -88,6 +88,7 @@ struct tegra_soctherm {
>  	struct clk *clock_tsensor;
>  	struct clk *clock_soctherm;
>  	void __iomem *regs;
> +	struct thermal_zone_device **thermctl_tzs;
>  
>  	u32 *calib;
>  	struct tegra_soctherm_soc *soc;
> @@ -95,19 +96,11 @@ struct tegra_soctherm {
>  	struct dentry *debugfs_dir;
>  };
>  
> -static int enable_tsensor(struct tegra_soctherm *tegra,
> -			  unsigned int i,
> -			  const struct tsensor_shared_calib *shared)
> +static void enable_tsensor(struct tegra_soctherm *tegra, unsigned int i)
>  {
>  	const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i];
>  	void __iomem *base = tegra->regs + sensor->base;
> -	u32 *calib = &tegra->calib[i];
>  	unsigned int val;
> -	int err;
> -
> -	err = tegra_calc_tsensor_calib(sensor, shared, calib);
> -	if (err)
> -		return err;
>  
>  	val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
>  	writel(val, base + SENSOR_CONFIG0);
> @@ -118,9 +111,7 @@ static int enable_tsensor(struct tegra_soctherm *tegra,
>  	val |= SENSOR_CONFIG1_TEMP_ENABLE;
>  	writel(val, base + SENSOR_CONFIG1);
>  
> -	writel(*calib, base + SENSOR_CONFIG2);
> -
> -	return 0;
> +	writel(tegra->calib[i], base + SENSOR_CONFIG2);
>  }
>  
>  /*
> @@ -425,6 +416,69 @@ static inline void soctherm_debug_init(struct platform_device *pdev)
>  }
>  #endif
>  
> +static int soctherm_clk_enable(struct platform_device *pdev, bool enable)
> +{
> +	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
> +	int err;
> +
> +	if (tegra->clock_soctherm == NULL || tegra->clock_tsensor == NULL)
> +		return -EINVAL;
> +
> +	reset_control_assert(tegra->reset);
> +
> +	if (enable) {
> +		err = clk_prepare_enable(tegra->clock_soctherm);
> +		if (err) {
> +			reset_control_deassert(tegra->reset);
> +			return err;
> +		}
> +
> +		err = clk_prepare_enable(tegra->clock_tsensor);
> +		if (err) {
> +			clk_disable_unprepare(tegra->clock_soctherm);
> +			reset_control_deassert(tegra->reset);
> +			return err;
> +		}
> +	} else {
> +		clk_disable_unprepare(tegra->clock_tsensor);
> +		clk_disable_unprepare(tegra->clock_soctherm);
> +	}
> +
> +	reset_control_deassert(tegra->reset);
> +
> +	return 0;
> +}
> +
> +static void soctherm_init(struct platform_device *pdev)
> +{
> +	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
> +	const struct tegra_tsensor_group **ttgs = tegra->soc->ttgs;
> +	int i;
> +	u32 pdiv, hotspot;
> +
> +	/* Initialize raw sensors */
> +	for (i = 0; i < tegra->soc->num_tsensors; ++i)
> +		enable_tsensor(tegra, i);
> +
> +	/* Wait for sensor data to be ready */
> +	usleep_range(1000, 5000);


Is this range applicable for all supported chip versions?

> +
> +	/* program pdiv and hotspot offsets per THERM */
> +	pdiv = readl(tegra->regs + SENSOR_PDIV);
> +	hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
> +	for (i = 0; i < tegra->soc->num_ttgs; ++i) {
> +		pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
> +				    ttgs[i]->pdiv);
> +		if (ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
> +			continue;
> +		hotspot =  REG_SET_MASK(hotspot,
> +					ttgs[i]->pllx_hotspot_mask,
> +					ttgs[i]->pllx_hotspot_diff);
> +	}
> +	writel(pdiv, tegra->regs + SENSOR_PDIV);
> +	writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
> +}
> +
>  static const struct of_device_id tegra_soctherm_of_match[] = {
>  #ifdef CONFIG_ARCH_TEGRA_124_SOC
>  	{
> @@ -452,7 +506,6 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
>  	struct tegra_soctherm_soc *soc;
>  	unsigned int i;
>  	int err;
> -	u32 pdiv, hotspot;
>  
>  	match = of_match_node(tegra_soctherm_of_match, pdev->dev.of_node);
>  	if (!match)
> @@ -493,52 +546,37 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
>  		return PTR_ERR(tegra->clock_soctherm);
>  	}
>  
> -	reset_control_assert(tegra->reset);
> -
> -	err = clk_prepare_enable(tegra->clock_soctherm);
> -	if (err)
> -		return err;
> -
> -	err = clk_prepare_enable(tegra->clock_tsensor);
> -	if (err) {
> -		clk_disable_unprepare(tegra->clock_soctherm);
> -		return err;
> -	}
> -
> -	reset_control_deassert(tegra->reset);
> -
> -	/* Initialize raw sensors */
> -
>  	tegra->calib = devm_kzalloc(&pdev->dev,
>  				    sizeof(u32) * soc->num_tsensors,
>  				    GFP_KERNEL);
>  	if (!tegra->calib)
>  		return -ENOMEM;
>  
> +	/* calculate shared calibration data */
>  	err = tegra_calc_shared_calib(soc->tfuse, &shared_calib);
>  	if (err)
> -		goto disable_clocks;
> +		return err;
>  
> +	/* calculate tsensor calibaration data */
>  	for (i = 0; i < soc->num_tsensors; ++i) {
> -		err = enable_tsensor(tegra, i, &shared_calib);
> +		err = tegra_calc_tsensor_calib(&soc->tsensors[i],
> +					       &shared_calib,
> +					       &tegra->calib[i]);
>  		if (err)
> -			goto disable_clocks;
> +			return err;
>  	}
>  
> -	/* Program pdiv and hotspot offsets per THERM */
> -	pdiv = readl(tegra->regs + SENSOR_PDIV);
> -	hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
> -	for (i = 0; i < soc->num_ttgs; ++i) {
> -		pdiv = REG_SET_MASK(pdiv, soc->ttgs[i]->pdiv_mask,
> -				    soc->ttgs[i]->pdiv);
> -		if (soc->ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
> -			continue;
> -		hotspot =  REG_SET_MASK(hotspot,
> -					soc->ttgs[i]->pllx_hotspot_mask,
> -					soc->ttgs[i]->pllx_hotspot_diff);
> -	}
> -	writel(pdiv, tegra->regs + SENSOR_PDIV);
> -	writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
> +	tegra->thermctl_tzs = devm_kzalloc(&pdev->dev,
> +					   sizeof(*z) * soc->num_ttgs,
> +					   GFP_KERNEL);
> +	if (!tegra->thermctl_tzs)
> +		return -ENOMEM;
> +
> +	err = soctherm_clk_enable(pdev, true);
> +	if (err)
> +		return err;
> +
> +	soctherm_init(pdev);
>  
>  	for (i = 0; i < soc->num_ttgs; ++i) {
>  		struct tegra_thermctl_zone *zone =
> @@ -563,6 +601,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
>  		}
>  
>  		zone->tz = z;
> +		tegra->thermctl_tzs[soc->ttgs[i]->id] = z;
>  
>  		/* Configure hw trip points */
>  		tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
> @@ -573,8 +612,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
>  	return 0;
>  
>  disable_clocks:
> -	clk_disable_unprepare(tegra->clock_tsensor);
> -	clk_disable_unprepare(tegra->clock_soctherm);
> +	soctherm_clk_enable(pdev, false);
>  
>  	return err;
>  }
> @@ -585,17 +623,54 @@ static int tegra_soctherm_remove(struct platform_device *pdev)
>  
>  	debugfs_remove_recursive(tegra->debugfs_dir);
>  
> -	clk_disable_unprepare(tegra->clock_tsensor);
> -	clk_disable_unprepare(tegra->clock_soctherm);
> +	soctherm_clk_enable(pdev, false);
> +
> +	return 0;
> +}
> +
> +static int soctherm_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +
> +	soctherm_clk_enable(pdev, false);
>  
>  	return 0;
>  }
>  
> +static int soctherm_resume(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
> +	struct tegra_soctherm_soc *soc = tegra->soc;
> +	int err, i;
> +
> +	err = soctherm_clk_enable(pdev, true);
> +	if (err) {
> +		dev_err(&pdev->dev,
> +			"Resume failed: enable clocks failed\n");
> +		return err;
> +	}
> +
> +	soctherm_init(pdev);
> +
> +	for (i = 0; i < soc->num_ttgs; ++i) {
> +		struct thermal_zone_device *tz;
> +
> +		tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
> +		tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
> +	}
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(tegra_soctherm_pm, soctherm_suspend, soctherm_resume);
> +
>  static struct platform_driver tegra_soctherm_driver = {
>  	.probe = tegra_soctherm_probe,
>  	.remove = tegra_soctherm_remove,
>  	.driver = {
>  		.name = "tegra_soctherm",
> +		.pm = &tegra_soctherm_pm,
>  		.of_match_table = tegra_soctherm_of_match,
>  	},
>  };
> -- 
> 1.9.1
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

  reply	other threads:[~2016-03-14 19:23 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-11  3:11 [PATCH V7 10/12] thermal: tegra: add PM support Wei Ni
2016-03-14 19:23 ` Eduardo Valentin [this message]
2016-03-15  9:25   ` Wei Ni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160314192316.GD1872@localhost.localdomain \
    --to=edubezval@gmail.com \
    --cc=MLongnecker@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mikko.perttunen@kapsi.fi \
    --cc=rui.zhang@intel.com \
    --cc=swarren@wwwdotorg.org \
    --cc=thierry.reding@gmail.com \
    --cc=wni@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).