From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v3 1/7] max8903: adds documentation for device tree bindings. Date: Mon, 20 Jun 2016 08:22:47 -0500 Message-ID: <20160620132247.GA30380@rob-hp-laptop> References: <1464849897-21527-3-git-send-email-chris@lapa.com.au> <1466139626-51434-2-git-send-email-chris@lapa.com.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1466139626-51434-2-git-send-email-chris@lapa.com.au> Sender: linux-kernel-owner@vger.kernel.org To: Chris Lapa Cc: k.kozlowski@samsung.com, dwmw2@infradead.org, dbaryshkov@gmail.com, sre@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org List-Id: linux-pm@vger.kernel.org On Fri, Jun 17, 2016 at 03:00:20PM +1000, Chris Lapa wrote: > From: Chris Lapa > > Signed-off-by: Chris Lapa > --- > .../devicetree/bindings/power/max8903-charger.txt | 25 ++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/max8903-charger.txt > > diff --git a/Documentation/devicetree/bindings/power/max8903-charger.txt b/Documentation/devicetree/bindings/power/max8903-charger.txt > new file mode 100644 > index 0000000..aea1dd2a > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/max8903-charger.txt > @@ -0,0 +1,25 @@ > +Maxim Semiconductor MAX8903 Battery Charger bindings > + > +Required properties: > +- compatible: "maxim,max8903-charger" for MAX8903 Battery Charger Drop "charger" as that is implied by the chip. > +- dok-gpios: Valid DC power has been detected, optional if uok-gpios is provided > +- uok-gpios: Valid USB power has been detected, optional if dok-gpios is provided > + > +Optional properties: > +- cen-gpios: Charge enable pin > +- chg-gpios: Charger status pin > +- flt-gpios: Fault pin > +- dcm-gpios: Current limit mode setting (DC or USB) > +- usus-gpios: USB suspend pin Need to state direction and active state for all of these.