[PATCH v2 0/4] PM / AVS: add Rockchip cpu avs

[PATCH v2 0/4] PM / AVS: add Rockchip cpu avs

[Finlye Xiao]

From: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

Under the same frequency, the operating voltage tends to decrease with
increasing leakage. so it is necessary to adjust opp's voltage according
to leakage for power.

V1->V2:
- 2/3 just add a static inline functiong in the of.h.
- 3/3 is separated into two patches.

Finley Xiao (4):
  nvmem: rockchip-efuse: Change initcall to subsys
  of: introduce of_property_read_s32_index
  dt-bindings: add binding document for Rockchip cpu avs
  PM / AVS: rockchip-cpu-avs: add driver handling Rockchip cpu avs

 .../devicetree/bindings/power/rockchip-cpu-avs.txt |  37 +++
 drivers/nvmem/rockchip-efuse.c                     |   9 +-
 drivers/power/avs/Kconfig                          |   9 +
 drivers/power/avs/Makefile                         |   1 +
 drivers/power/avs/rockchip-cpu-avs.c               | 331 +++++++++++++++++++++
 include/linux/of.h                                 |   8 +
 6 files changed, 394 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/power/rockchip-cpu-avs.txt
 create mode 100644 drivers/power/avs/rockchip-cpu-avs.c

-- 
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/4] nvmem: rockchip-efuse: Change initcall to subsys

[Finlye Xiao]

From: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

We will register a cpufreq notifier for adjusting opp's voltage, and it
need to fetch cpu's leakage from efuse in the notifier_call. so the efuse
driver should probe before cpufreq driver.

Signed-off-by: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
 drivers/nvmem/rockchip-efuse.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/nvmem/rockchip-efuse.c b/drivers/nvmem/rockchip-efuse.c
index 4d3f391..378993d 100644
--- a/drivers/nvmem/rockchip-efuse.c
+++ b/drivers/nvmem/rockchip-efuse.c
@@ -144,6 +144,13 @@ static struct platform_driver rockchip_efuse_driver = {
 	},
 };
 
-module_platform_driver(rockchip_efuse_driver);
+static int __init rockchip_efuse_module_init(void)
+{
+	return platform_driver_probe(&rockchip_efuse_driver,
+				     rockchip_efuse_probe);
+}
+
+subsys_initcall(rockchip_efuse_module_init);
+
 MODULE_DESCRIPTION("rockchip_efuse driver");
 MODULE_LICENSE("GPL v2");
-- 
1.9.1

Re: [PATCH v2 1/4] nvmem: rockchip-efuse: Change initcall to subsys

[Kevin Hilman]

Finlye Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org> writes:

> From: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>
> We will register a cpufreq notifier for adjusting opp's voltage, and it
> need to fetch cpu's leakage from efuse in the notifier_call. so the efuse
> driver should probe before cpufreq driver.
>
> Signed-off-by: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

Why can't this be handled with deferred probling?  initcall ordering is
a can of worms.

Kevin

Re: [PATCH v2 1/4] nvmem: rockchip-efuse: Change initcall to subsys

[Heiko Stuebner]

Am Donnerstag, 18. August 2016, 13:28:58 CEST schrieb Kevin Hilman:
> Finlye Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org> writes:
> > From: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> > 
> > We will register a cpufreq notifier for adjusting opp's voltage, and it
> > need to fetch cpu's leakage from efuse in the notifier_call. so the efuse
> > driver should probe before cpufreq driver.
> > 
> > Signed-off-by: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> 
> Why can't this be handled with deferred probling?  initcall ordering is
> a can of worms.

I think the issue is less between efuse and avs driver, but more between avs 
driver and cpufreq. The avs driver aims to modify the opp table and thus wants 
to do that / register the notifier before cpufreq starts.

And as there is no direct connection between cpufreq and the avs driver, 
making cpufreq defer probing is probably not really easy.

Re: [PATCH v2 1/4] nvmem: rockchip-efuse: Change initcall to subsys

[Kevin Hilman]

Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org> writes:

> Am Donnerstag, 18. August 2016, 13:28:58 CEST schrieb Kevin Hilman:
>> Finlye Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org> writes:
>> > From: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>> > 
>> > We will register a cpufreq notifier for adjusting opp's voltage, and it
>> > need to fetch cpu's leakage from efuse in the notifier_call. so the efuse
>> > driver should probe before cpufreq driver.
>> > 
>> > Signed-off-by: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>> 
>> Why can't this be handled with deferred probling?  initcall ordering is
>> a can of worms.
>
> I think the issue is less between efuse and avs driver, but more between avs 
> driver and cpufreq. The avs driver aims to modify the opp table and thus wants 
> to do that / register the notifier before cpufreq starts.
>
> And as there is no direct connection between cpufreq and the avs driver, 
> making cpufreq defer probing is probably not really easy.

Thanks for the explanation.

Sounds like something that belongs in the changelog.

Kevin


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/4] of: introduce of_property_read_s32_index

[Finlye Xiao]

From: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

Introduce single indexed signed 32bit integer of_property_read method.

Signed-off-by: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
 include/linux/of.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/linux/of.h b/include/linux/of.h
index 3d9ff8e..8ef775e 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -929,6 +929,14 @@ static inline int of_property_read_s32(const struct device_node *np,
 	return of_property_read_u32(np, propname, (u32*) out_value);
 }
 
+static inline int of_property_read_s32_index(const struct device_node *np,
+					     const char *propname, u32 index,
+					     s32 *out_value)
+{
+	return of_property_read_u32_index(np, propname, index,
+		(u32 *)out_value);
+}
+
 #define of_for_each_phandle(it, err, np, ln, cn, cc)			\
 	for (of_phandle_iterator_init((it), (np), (ln), (cn), (cc)),	\
 	     err = of_phandle_iterator_next(it);			\
-- 
1.9.1

[PATCH v2 4/4] PM / AVS: rockchip-cpu-avs: add driver handling Rockchip cpu avs

[Finlye Xiao]

From: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

This patch supports adjusting opp's voltage according to leakage

Signed-off-by: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
 drivers/power/avs/Kconfig            |   9 +
 drivers/power/avs/Makefile           |   1 +
 drivers/power/avs/rockchip-cpu-avs.c | 331 +++++++++++++++++++++++++++++++++++
 3 files changed, 341 insertions(+)
 create mode 100644 drivers/power/avs/rockchip-cpu-avs.c

diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
index a67eeac..dea13801 100644
--- a/drivers/power/avs/Kconfig
+++ b/drivers/power/avs/Kconfig
@@ -18,3 +18,12 @@ config ROCKCHIP_IODOMAIN
           Say y here to enable support io domains on Rockchip SoCs. It is
           necessary for the io domain setting of the SoC to match the
           voltage supplied by the regulators.
+
+config ROCKCHIP_CPU_AVS
+        bool "Rockchip CPU AVS support"
+        depends on POWER_AVS && ARCH_ROCKCHIP && OF && CPU_FREQ
+        depends on (ARM_CPU_TOPOLOGY || ARM64) && ROCKCHIP_EFUSE
+        help
+          Say y here to enable support CPU AVS on Rockchip SoCs.
+          The cpu's operating voltage is adapted depending on leakage
+          or pvtm.
diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile
index ba4c7bc..11ce242 100644
--- a/drivers/power/avs/Makefile
+++ b/drivers/power/avs/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_POWER_AVS_OMAP)		+= smartreflex.o
 obj-$(CONFIG_ROCKCHIP_IODOMAIN)		+= rockchip-io-domain.o
+obj-$(CONFIG_ROCKCHIP_CPU_AVS)		+= rockchip-cpu-avs.o
diff --git a/drivers/power/avs/rockchip-cpu-avs.c b/drivers/power/avs/rockchip-cpu-avs.c
new file mode 100644
index 0000000..7b42b46
--- /dev/null
+++ b/drivers/power/avs/rockchip-cpu-avs.c
@@ -0,0 +1,331 @@
+/*
+  * Rockchip CPU AVS support.
+  *
+  * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
+  * Author: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
+  *
+  * This program is free software; you can redistribute it and/or modify it
+  * under the terms of version 2 of the GNU General Public License as
+  * published by the Free Software Foundation.
+  *
+  * This program is distributed in the hope that it will be useful, but WITHOUT
+  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+  * more details.
+  */
+
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include "../../base/power/opp/opp.h"
+
+#define MAX_NAME_LEN		22
+#define LEAKAGE_TABLE_END	~1
+#define INVALID_VALUE		0xff
+
+struct leakage_volt_table {
+	int min;
+	int max;
+	int volt;
+};
+
+struct cluster_info {
+	int adjust_volt;
+	unsigned char leakage;
+	struct leakage_volt_table *table;
+};
+
+struct rockchip_cpu_avs {
+	struct device *dev;
+	struct cluster_info *cluster;
+	struct notifier_block cpufreq_notify;
+};
+
+#define notifier_to_avs(_n) container_of(_n, struct rockchip_cpu_avs, \
+	cpufreq_notify)
+
+static int rockchip_get_leakage(struct device *cpu_dev, unsigned char *leakage)
+{
+	struct nvmem_cell *cell;
+	unsigned char *buf;
+	size_t len;
+
+	cell = nvmem_cell_get(cpu_dev, "cpu_leakage");
+	if (IS_ERR(cell)) {
+		dev_err(cpu_dev, "avs failed to get cpu_leakage cell\n");
+		return PTR_ERR(cell);
+	}
+
+	buf = (unsigned char *)nvmem_cell_read(cell, &len);
+
+	nvmem_cell_put(cell);
+
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	if (buf[0] == INVALID_VALUE)
+		return -EINVAL;
+
+	*leakage = buf[0];
+	kfree(buf);
+
+	return 0;
+}
+
+static int rockchip_get_offset_volt(unsigned char leakage,
+				    struct leakage_volt_table *table, int *volt)
+{
+	unsigned int i, j;
+
+	if (!table)
+		return -EINVAL;
+
+	for (i = 0; table[i].volt != LEAKAGE_TABLE_END; i++) {
+		if (leakage >= table[i].min)
+			j = i;
+	}
+
+	*volt = table[j].volt;
+
+	return 0;
+}
+
+static int rockchip_adjust_opp_table(struct device *cpu_dev,
+				     struct cpufreq_frequency_table *table,
+				     int volt)
+{
+	struct opp_table *opp_table;
+	struct cpufreq_frequency_table *pos;
+	struct dev_pm_opp *opp;
+
+	if (!volt)
+		return 0;
+
+	rcu_read_lock();
+
+	opp_table = _find_opp_table(cpu_dev);
+	if (IS_ERR(opp_table)) {
+		rcu_read_unlock();
+		return PTR_ERR(opp_table);
+	}
+
+	cpufreq_for_each_valid_entry(pos, table) {
+		opp = dev_pm_opp_find_freq_exact(cpu_dev, pos->frequency * 1000,
+						 true);
+		if (IS_ERR(opp))
+			continue;
+
+		opp->u_volt += volt;
+		opp->u_volt_min += volt;
+		opp->u_volt_max += volt;
+	}
+
+	rcu_read_unlock();
+
+	return 0;
+}
+
+static void rockchip_adjust_volt_by_leakage(struct device *cpu_dev,
+					    struct cpufreq_policy *policy,
+					    struct rockchip_cpu_avs *avs,
+					    int id)
+{
+	struct cluster_info *cluster = &avs->cluster[id];
+	int ret;
+
+	if (cluster->leakage)
+		goto next;
+
+	ret = rockchip_get_leakage(cpu_dev, &cluster->leakage);
+	if (ret) {
+		dev_err(avs->dev, "cpu%d leakage invalid\n", policy->cpu);
+		return;
+	}
+
+	ret = rockchip_get_offset_volt(cluster->leakage, cluster->table,
+				       &cluster->adjust_volt);
+	if (ret) {
+		dev_err(avs->dev, "cpu%d leakage volt table err\n",
+			policy->cpu);
+		return;
+	}
+
+next:
+	ret = rockchip_adjust_opp_table(cpu_dev, policy->freq_table,
+					cluster->adjust_volt);
+	if (ret)
+		dev_err(avs->dev, "cpu%d failed to adjust volt\n", policy->cpu);
+
+	dev_dbg(avs->dev, "cpu%d, leakage=%d, adjust_volt=%d\n", policy->cpu,
+		cluster->leakage, cluster->adjust_volt);
+}
+
+static int rockchip_cpu_avs_notifier(struct notifier_block *nb,
+				     unsigned long event, void *data)
+{
+	struct rockchip_cpu_avs *avs = notifier_to_avs(nb);
+	struct cpufreq_policy *policy = data;
+	struct device *cpu_dev;
+	int cluster_id;
+
+	if (event != CPUFREQ_START)
+		goto out;
+
+	cluster_id = topology_physical_package_id(policy->cpu);
+	if (cluster_id < 0) {
+		dev_err(avs->dev, "cpu%d invalid cluster id\n", policy->cpu);
+		goto out;
+	}
+
+	if (!policy->freq_table) {
+		dev_err(avs->dev, "cpu%d freq table not found\n", policy->cpu);
+		goto out;
+	}
+
+	cpu_dev = get_cpu_device(policy->cpu);
+	if (!cpu_dev) {
+		dev_err(avs->dev, "cpu%d failed to get device\n", policy->cpu);
+		goto out;
+	}
+
+	rockchip_adjust_volt_by_leakage(cpu_dev, policy, avs, cluster_id);
+
+out:
+
+	return NOTIFY_OK;
+}
+
+static int rockchip_get_leakage_volt_table(struct device *dev,
+					   struct leakage_volt_table **table,
+					   const char *name)
+{
+	struct device_node *np = dev->of_node;
+	struct leakage_volt_table *volt_table;
+	const struct property *prop;
+	int count, i;
+
+	prop = of_find_property(np, name, NULL);
+	if (!prop) {
+		dev_err(dev, "failed to find prop %s\n", name);
+		return -EINVAL;
+	}
+	if (!prop->value) {
+		dev_err(dev, "%s value is NULL\n", name);
+		return -ENODATA;
+	}
+
+	count = of_property_count_u32_elems(np, name);
+	if (count < 0) {
+		dev_err(dev, "Invalid %s property (%d)\n", name, count);
+		return -EINVAL;
+	}
+	if (count % 3) {
+		dev_err(dev, "Invalid number of elements in %s property (%d)\n",
+			name, count);
+		return -EINVAL;
+	}
+
+	volt_table = kzalloc(sizeof(*table) * (count / 3 + 1), GFP_KERNEL);
+	if (!volt_table)
+		return -ENOMEM;
+
+	if (volt_table) {
+		for (i = 0; i < count / 3; i++) {
+			of_property_read_s32_index(np, name, 3 * i,
+						   &volt_table[i].min);
+			of_property_read_s32_index(np, name, 3 * i + 1,
+						   &volt_table[i].max);
+			of_property_read_s32_index(np, name, 3 * i + 2,
+						   &volt_table[i].volt);
+		}
+		volt_table[i].min = 0;
+		volt_table[i].max = 0;
+		volt_table[i].volt = LEAKAGE_TABLE_END;
+	}
+
+	*table = volt_table;
+
+	return 0;
+}
+
+static const struct of_device_id rockchip_cpu_avs_match[] = {
+	{
+		.compatible = "rockchip,rk3399-cpu-avs",
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_cpu_avs_match);
+
+static int rockchip_cpu_avs_probe(struct platform_device *pdev)
+{
+	struct rockchip_cpu_avs *avs;
+	char name[MAX_NAME_LEN];
+	int i, ret, cpu, id;
+	int last_id = -1;
+	int cluster_num = 0;
+
+	for_each_online_cpu(cpu) {
+		id = topology_physical_package_id(cpu);
+		if (id < 0)
+			return -EINVAL;
+		if (id != last_id) {
+			last_id = id;
+			cluster_num++;
+		}
+	}
+
+	avs = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_cpu_avs),
+			   GFP_KERNEL);
+	if (!avs)
+		return -ENOMEM;
+
+	avs->dev = &pdev->dev;
+	avs->cpufreq_notify.notifier_call = rockchip_cpu_avs_notifier;
+	avs->cluster = devm_kzalloc(&pdev->dev,
+		sizeof(struct cluster_info) * cluster_num, GFP_KERNEL);
+	if (!avs->cluster)
+		return -ENOMEM;
+
+	for (i = 0; i < cluster_num; i++) {
+		snprintf(name, MAX_NAME_LEN, "leakage-volt-cluster%d", i);
+		ret = rockchip_get_leakage_volt_table(&pdev->dev,
+						      &avs->cluster[i].table,
+						      name);
+		if (ret)
+			continue;
+	}
+
+	return cpufreq_register_notifier(&avs->cpufreq_notify,
+		CPUFREQ_POLICY_NOTIFIER);
+}
+
+static struct platform_driver rockchip_cpu_avs_driver = {
+	.probe   = rockchip_cpu_avs_probe,
+	.driver  = {
+		.name  = "rockchip-cpu-avs",
+		.of_match_table = rockchip_cpu_avs_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+static int __init rockchip_cpu_avs_module_init(void)
+{
+	return platform_driver_probe(&rockchip_cpu_avs_driver,
+				     rockchip_cpu_avs_probe);
+}
+
+subsys_initcall(rockchip_cpu_avs_module_init);
+
+MODULE_DESCRIPTION("Rockchip CPU AVS driver");
+MODULE_AUTHOR("Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

Re: [PATCH v2 4/4] PM / AVS: rockchip-cpu-avs: add driver handling Rockchip cpu avs

[Kevin Hilman]

Hi Finlye,

Finlye Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org> writes:

> From: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>
> This patch supports adjusting opp's voltage according to leakage
>
> Signed-off-by: Finley Xiao <finley.xiao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

[...]

> +static void rockchip_adjust_volt_by_leakage(struct device *cpu_dev,
> +					    struct cpufreq_policy *policy,
> +					    struct rockchip_cpu_avs *avs,
> +					    int id)
> +{
> +	struct cluster_info *cluster = &avs->cluster[id];
> +	int ret;
> +
> +	if (cluster->leakage)
> +		goto next;
>
> +	ret = rockchip_get_leakage(cpu_dev, &cluster->leakage);
> +	if (ret) {
> +		dev_err(avs->dev, "cpu%d leakage invalid\n", policy->cpu);
> +		return;
> +	}
> +
> +	ret = rockchip_get_offset_volt(cluster->leakage, cluster->table,
> +				       &cluster->adjust_volt);
> +	if (ret) {
> +		dev_err(avs->dev, "cpu%d leakage volt table err\n",
> +			policy->cpu);
> +		return;
> +	}

Rather than do this for each notifier, since the table is static, why
not fill out struct cluster_info during probe?

I see there is a check above to skip this if it's already filled out,
but since the data is static, why not fill it out once at probe.

> +next:
> +	ret = rockchip_adjust_opp_table(cpu_dev, policy->freq_table,
> +					cluster->adjust_volt);
> +	if (ret)
> +		dev_err(avs->dev, "cpu%d failed to adjust volt\n", policy->cpu);
> +
> +	dev_dbg(avs->dev, "cpu%d, leakage=%d, adjust_volt=%d\n", policy->cpu,
> +		cluster->leakage, cluster->adjust_volt);
> +}

[...]

> +static int rockchip_cpu_avs_probe(struct platform_device *pdev)
> +{
> +	struct rockchip_cpu_avs *avs;
> +	char name[MAX_NAME_LEN];
> +	int i, ret, cpu, id;
> +	int last_id = -1;
> +	int cluster_num = 0;
> +
> +	for_each_online_cpu(cpu) {
> +		id = topology_physical_package_id(cpu);
> +		if (id < 0)
> +			return -EINVAL;
> +		if (id != last_id) {
> +			last_id = id;
> +			cluster_num++;
> +		}
> +	}

I don't think this counting is quite correct since physical and logial
CPU numbering is not guaranteed.

For example, I've seen big.LITTLE systems where the first little CPU is
the boot CPU, but the big CPUs are the next ones booted, you end up with
something like:

little cluster: CPU0,5-7
big cluster: CPU1-4

So your counting mechansim above would count 3 clusters in that case.

> +	avs = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_cpu_avs),
> +			   GFP_KERNEL);
> +	if (!avs)
> +		return -ENOMEM;
> +
> +	avs->dev = &pdev->dev;
> +	avs->cpufreq_notify.notifier_call = rockchip_cpu_avs_notifier;
> +	avs->cluster = devm_kzalloc(&pdev->dev,
> +		sizeof(struct cluster_info) * cluster_num, GFP_KERNEL);
> +	if (!avs->cluster)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < cluster_num; i++) {
> +		snprintf(name, MAX_NAME_LEN, "leakage-volt-cluster%d", i);
> +		ret = rockchip_get_leakage_volt_table(&pdev->dev,
> +						      &avs->cluster[i].table,
> +						      name);
> +		if (ret)
> +			continue;
> +	}
> +
> +	return cpufreq_register_notifier(&avs->cpufreq_notify,
> +		CPUFREQ_POLICY_NOTIFIER);
> +}

Other than those minor comments, I think the driver looks good to me.

After those changes. We'll also need to see acks from the DT folks on
the DT changes and bindings before merging.

Kevin

Re: [PATCH v2 4/4] PM / AVS: rockchip-cpu-avs: add driver handling Rockchip cpu avs

[Viresh Kumar]

On 18-08-16, 16:52, Finlye Xiao wrote:
> +static int rockchip_adjust_opp_table(struct device *cpu_dev,
> +				     struct cpufreq_frequency_table *table,
> +				     int volt)
> +{
> +	struct opp_table *opp_table;
> +	struct cpufreq_frequency_table *pos;
> +	struct dev_pm_opp *opp;
> +
> +	if (!volt)
> +		return 0;
> +
> +	rcu_read_lock();
> +
> +	opp_table = _find_opp_table(cpu_dev);
> +	if (IS_ERR(opp_table)) {
> +		rcu_read_unlock();
> +		return PTR_ERR(opp_table);
> +	}
> +
> +	cpufreq_for_each_valid_entry(pos, table) {
> +		opp = dev_pm_opp_find_freq_exact(cpu_dev, pos->frequency * 1000,
> +						 true);
> +		if (IS_ERR(opp))
> +			continue;
> +
> +		opp->u_volt += volt;
> +		opp->u_volt_min += volt;
> +		opp->u_volt_max += volt;
> +	}
> +
> +	rcu_read_unlock();
> +
> +	return 0;
> +}

I wouldn't prefer altering the opp tables from individual drivers at all. At the
least, it should be done via some helpers exposed by the core.

But before that I would like to hear from Stephen a bit as I recall he was also
working on something similar.

-- 
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/4] PM / AVS: rockchip-cpu-avs: add driver handling Rockchip cpu avs

[Stephen Boyd]

On 08/29, Viresh Kumar wrote:
> On 18-08-16, 16:52, Finlye Xiao wrote:
> > +static int rockchip_adjust_opp_table(struct device *cpu_dev,
> > +				     struct cpufreq_frequency_table *table,
> > +				     int volt)
> > +{
> > +	struct opp_table *opp_table;
> > +	struct cpufreq_frequency_table *pos;
> > +	struct dev_pm_opp *opp;
> > +
> > +	if (!volt)
> > +		return 0;
> > +
> > +	rcu_read_lock();
> > +
> > +	opp_table = _find_opp_table(cpu_dev);
> > +	if (IS_ERR(opp_table)) {
> > +		rcu_read_unlock();
> > +		return PTR_ERR(opp_table);
> > +	}
> > +
> > +	cpufreq_for_each_valid_entry(pos, table) {
> > +		opp = dev_pm_opp_find_freq_exact(cpu_dev, pos->frequency * 1000,
> > +						 true);
> > +		if (IS_ERR(opp))
> > +			continue;
> > +
> > +		opp->u_volt += volt;
> > +		opp->u_volt_min += volt;
> > +		opp->u_volt_max += volt;
> > +	}
> > +
> > +	rcu_read_unlock();
> > +
> > +	return 0;
> > +}
> 
> I wouldn't prefer altering the opp tables from individual drivers at all. At the
> least, it should be done via some helpers exposed by the core.
> 
> But before that I would like to hear from Stephen a bit as I recall he was also
> working on something similar.
> 

I had a patch to modify the voltage at runtime for the "current"
OPP. Now that we have regulator and clk control inside OPP that
became a little easier to do without having to do some notifier
from the OPP layer to the consumers. I haven't had time to revive
those patches though. Should we do that? Does this need to modify
anything besides the OPP the device is currently running at?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v2 4/4] PM / AVS: rockchip-cpu-avs: add driver handling Rockchip cpu avs

[Viresh Kumar]

On 12-09-16, 14:55, Stephen Boyd wrote:
> On 08/29, Viresh Kumar wrote:
> > On 18-08-16, 16:52, Finlye Xiao wrote:
> > > +static int rockchip_adjust_opp_table(struct device *cpu_dev,
> > > +				     struct cpufreq_frequency_table *table,
> > > +				     int volt)
> > > +{
> > > +	struct opp_table *opp_table;
> > > +	struct cpufreq_frequency_table *pos;
> > > +	struct dev_pm_opp *opp;
> > > +
> > > +	if (!volt)
> > > +		return 0;
> > > +
> > > +	rcu_read_lock();
> > > +
> > > +	opp_table = _find_opp_table(cpu_dev);
> > > +	if (IS_ERR(opp_table)) {
> > > +		rcu_read_unlock();
> > > +		return PTR_ERR(opp_table);
> > > +	}
> > > +
> > > +	cpufreq_for_each_valid_entry(pos, table) {
> > > +		opp = dev_pm_opp_find_freq_exact(cpu_dev, pos->frequency * 1000,
> > > +						 true);
> > > +		if (IS_ERR(opp))
> > > +			continue;
> > > +
> > > +		opp->u_volt += volt;
> > > +		opp->u_volt_min += volt;
> > > +		opp->u_volt_max += volt;
> > > +	}
> > > +
> > > +	rcu_read_unlock();
> > > +
> > > +	return 0;
> > > +}
> > 
> > I wouldn't prefer altering the opp tables from individual drivers at all. At the
> > least, it should be done via some helpers exposed by the core.
> > 
> > But before that I would like to hear from Stephen a bit as I recall he was also
> > working on something similar.
> > 
> 
> I had a patch to modify the voltage at runtime for the "current"
> OPP. Now that we have regulator and clk control inside OPP that
> became a little easier to do without having to do some notifier
> from the OPP layer to the consumers. I haven't had time to revive
> those patches though. Should we do that?

Perhaps yes, we should have a common place for doing all that.

> Does this need to modify
> anything besides the OPP the device is currently running at?

Finlye, can you please answer this ?

-- 
viresh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/4] PM / AVS: rockchip-cpu-avs: add driver handling Rockchip cpu avs

[Heiko Stuebner]

Am Montag, 26. September 2016, 09:25:11 CEST schrieb Viresh Kumar:
> On 12-09-16, 14:55, Stephen Boyd wrote:
> > On 08/29, Viresh Kumar wrote:
> > > On 18-08-16, 16:52, Finlye Xiao wrote:
> > > > +static int rockchip_adjust_opp_table(struct device *cpu_dev,
> > > > +				     struct cpufreq_frequency_table *table,
> > > > +				     int volt)
> > > > +{
> > > > +	struct opp_table *opp_table;
> > > > +	struct cpufreq_frequency_table *pos;
> > > > +	struct dev_pm_opp *opp;
> > > > +
> > > > +	if (!volt)
> > > > +		return 0;
> > > > +
> > > > +	rcu_read_lock();
> > > > +
> > > > +	opp_table = _find_opp_table(cpu_dev);
> > > > +	if (IS_ERR(opp_table)) {
> > > > +		rcu_read_unlock();
> > > > +		return PTR_ERR(opp_table);
> > > > +	}
> > > > +
> > > > +	cpufreq_for_each_valid_entry(pos, table) {
> > > > +		opp = dev_pm_opp_find_freq_exact(cpu_dev, pos->frequency * 1000,
> > > > +						 true);
> > > > +		if (IS_ERR(opp))
> > > > +			continue;
> > > > +
> > > > +		opp->u_volt += volt;
> > > > +		opp->u_volt_min += volt;
> > > > +		opp->u_volt_max += volt;
> > > > +	}
> > > > +
> > > > +	rcu_read_unlock();
> > > > +
> > > > +	return 0;
> > > > +}
> > > 
> > > I wouldn't prefer altering the opp tables from individual drivers at
> > > all. At the least, it should be done via some helpers exposed by the
> > > core.
> > > 
> > > But before that I would like to hear from Stephen a bit as I recall he
> > > was also working on something similar.
> > 
> > I had a patch to modify the voltage at runtime for the "current"
> > OPP. Now that we have regulator and clk control inside OPP that
> > became a little easier to do without having to do some notifier
> > from the OPP layer to the consumers. I haven't had time to revive
> > those patches though. Should we do that?
> 
> Perhaps yes, we should have a common place for doing all that.
> 
> > Does this need to modify
> > anything besides the OPP the device is currently running at?
> 
> Finlye, can you please answer this ?

If I understand it correctly, depending on the leakage value stored in an 
efuse, all opp voltages are reduced by a certain value. Right now the driver 
does it in one go for the full opp table, but of course could also do it for 
each new opp individually before it gets set.

Re: [PATCH v2 4/4] PM / AVS: rockchip-cpu-avs: add driver handling Rockchip cpu avs

[Finley Xiao]

在 2016/9/26 16:05, Heiko Stuebner 写道:
> Am Montag, 26. September 2016, 09:25:11 CEST schrieb Viresh Kumar:
>> On 12-09-16, 14:55, Stephen Boyd wrote:
>>> On 08/29, Viresh Kumar wrote:
>>>> On 18-08-16, 16:52, Finlye Xiao wrote:
>>>>> +static int rockchip_adjust_opp_table(struct device *cpu_dev,
>>>>> +				     struct cpufreq_frequency_table *table,
>>>>> +				     int volt)
>>>>> +{
>>>>> +	struct opp_table *opp_table;
>>>>> +	struct cpufreq_frequency_table *pos;
>>>>> +	struct dev_pm_opp *opp;
>>>>> +
>>>>> +	if (!volt)
>>>>> +		return 0;
>>>>> +
>>>>> +	rcu_read_lock();
>>>>> +
>>>>> +	opp_table = _find_opp_table(cpu_dev);
>>>>> +	if (IS_ERR(opp_table)) {
>>>>> +		rcu_read_unlock();
>>>>> +		return PTR_ERR(opp_table);
>>>>> +	}
>>>>> +
>>>>> +	cpufreq_for_each_valid_entry(pos, table) {
>>>>> +		opp = dev_pm_opp_find_freq_exact(cpu_dev, pos->frequency * 1000,
>>>>> +						 true);
>>>>> +		if (IS_ERR(opp))
>>>>> +			continue;
>>>>> +
>>>>> +		opp->u_volt += volt;
>>>>> +		opp->u_volt_min += volt;
>>>>> +		opp->u_volt_max += volt;
>>>>> +	}
>>>>> +
>>>>> +	rcu_read_unlock();
>>>>> +
>>>>> +	return 0;
>>>>> +}
>>>> I wouldn't prefer altering the opp tables from individual drivers at
>>>> all. At the least, it should be done via some helpers exposed by the
>>>> core.
>>>>
>>>> But before that I would like to hear from Stephen a bit as I recall he
>>>> was also working on something similar.
>>> I had a patch to modify the voltage at runtime for the "current"
>>> OPP. Now that we have regulator and clk control inside OPP that
>>> became a little easier to do without having to do some notifier
>>> from the OPP layer to the consumers. I haven't had time to revive
>>> those patches though. Should we do that?
>> Perhaps yes, we should have a common place for doing all that.
>>
>>> Does this need to modify
>>> anything besides the OPP the device is currently running at?
>> Finlye, can you please answer this ?
> If I understand it correctly, depending on the leakage value stored in an
> efuse, all opp voltages are reduced by a certain value. Right now the driver
> does it in one go for the full opp table, but of course could also do it for
> each new opp individually before it gets set.
>
Yes， it is necessary to modify all opp voltages and  I agreed with Heiko.
>

-- 
Finley



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v2 4/4] PM / AVS: rockchip-cpu-avs: add driver handling Rockchip cpu avs

[Stephen Boyd]

On 09/26, Heiko Stuebner wrote:
> Am Montag, 26. September 2016, 09:25:11 CEST schrieb Viresh Kumar:
> > On 12-09-16, 14:55, Stephen Boyd wrote:
> > > On 08/29, Viresh Kumar wrote:
> > > > On 18-08-16, 16:52, Finlye Xiao wrote:
> > > > > +static int rockchip_adjust_opp_table(struct device *cpu_dev,
> > > > > +				     struct cpufreq_frequency_table *table,
> > > > > +				     int volt)
> > > > > +{
> > > > > +	struct opp_table *opp_table;
> > > > > +	struct cpufreq_frequency_table *pos;
> > > > > +	struct dev_pm_opp *opp;
> > > > > +
> > > > > +	if (!volt)
> > > > > +		return 0;
> > > > > +
> > > > > +	rcu_read_lock();
> > > > > +
> > > > > +	opp_table = _find_opp_table(cpu_dev);
> > > > > +	if (IS_ERR(opp_table)) {
> > > > > +		rcu_read_unlock();
> > > > > +		return PTR_ERR(opp_table);
> > > > > +	}
> > > > > +
> > > > > +	cpufreq_for_each_valid_entry(pos, table) {
> > > > > +		opp = dev_pm_opp_find_freq_exact(cpu_dev, pos->frequency * 1000,
> > > > > +						 true);
> > > > > +		if (IS_ERR(opp))
> > > > > +			continue;
> > > > > +
> > > > > +		opp->u_volt += volt;
> > > > > +		opp->u_volt_min += volt;
> > > > > +		opp->u_volt_max += volt;
> > > > > +	}
> > > > > +
> > > > > +	rcu_read_unlock();
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > 
> > > > I wouldn't prefer altering the opp tables from individual drivers at
> > > > all. At the least, it should be done via some helpers exposed by the
> > > > core.
> > > > 
> > > > But before that I would like to hear from Stephen a bit as I recall he
> > > > was also working on something similar.
> > > 
> > > I had a patch to modify the voltage at runtime for the "current"
> > > OPP. Now that we have regulator and clk control inside OPP that
> > > became a little easier to do without having to do some notifier
> > > from the OPP layer to the consumers. I haven't had time to revive
> > > those patches though. Should we do that?
> > 
> > Perhaps yes, we should have a common place for doing all that.
> > 
> > > Does this need to modify
> > > anything besides the OPP the device is currently running at?
> > 
> > Finlye, can you please answer this ?
> 
> If I understand it correctly, depending on the leakage value stored in an 
> efuse, all opp voltages are reduced by a certain value. Right now the driver 
> does it in one go for the full opp table, but of course could also do it for 
> each new opp individually before it gets set.

Ok. Well either way that sounds fine. We could expose an API to
change each voltage and an API to change the current voltage and
update the table.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v2 3/4] dt-bindings: add binding document for Rockchip cpu avs

[Finlye Xiao]

From: Finley Xiao <finley.xiao@rock-chips.com>

This patch documents the Rockchip cpu avs device tree binding.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
---
 .../devicetree/bindings/power/rockchip-cpu-avs.txt | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/rockchip-cpu-avs.txt

diff --git a/Documentation/devicetree/bindings/power/rockchip-cpu-avs.txt b/Documentation/devicetree/bindings/power/rockchip-cpu-avs.txt
new file mode 100644
index 0000000..705f516
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip-cpu-avs.txt
@@ -0,0 +1,37 @@
+Rockchip cpu avs device tree bindings
+-------------------------------------
+
+Under the same frequency, the operating voltage tends to decrease with
+increasing leakage. so it is necessary to adjust opp's voltage according
+to leakage for power.
+
+
+Required properties:
+- compatible: Should be one of the following.
+  - "rockchip,rk3399-cpu-avs" - for RK3399 SoCs.
+- leakage-volt-<name>: Named leakage-volt property. At runtime, the
+  platform can find a cpu's cluster_id according to it's cpu_id and match
+  leakage-volt-<name> property. The property is an array of 3-tuples
+  items, and each item consists of leakage and voltage like
+  <min-leakage-mA max-leakage-mA volt-uV>.
+	min-leakage: minimum leakage in mA, ranges from 0 to 254.
+	max-leakage: maximum leakage in mA, ranges from 0 to 254.
+	volt: voltage offset in mV to apply to the opp table entries.
+
+Example:
+
+	cpu_avs: cpu-avs {
+		compatible = "rockchip,rk3399-cpu-avs";
+		leakage-volt-cluster0 = <
+		/*  mA        mA         uV*/
+		    0         100        0
+		    101       200        (-25000)
+		    201       254        (-50000)
+		>;
+		leakage-volt-cluster1 = <
+		/*  mA        mA         uV*/
+		    0         100        0
+		    101       200        (-25000)
+		    201       254        (-50000)
+		>;
+	};
-- 
1.9.1