[PATCH v5 0/2] qcom OTG regulator support

[PATCH v5 0/2] qcom OTG regulator support

[Stephen Boyd]

This is a resend/resurrection of Tim's patches to add support
for the OTG regulator on some of qcom's PMICs[1]. I've made
some minor modifications to the driver to make it work, but
otherwise it works fine with my USB otg testing. Changes
are noted in a maintainer tag.

Tim, did you want to me to fix the name? I pulled these from patchwork
and it seems you sent it as "Bird, Tim" which may have not been 
intentional.

https://patchwork.kernel.org/patch/7857021/

Bird, Tim (2):
  dt-binding: power: Add otg regulator binding
  power: qcom_smbb: Add otg regulator for control of vbus

 .../devicetree/bindings/power/supply/qcom_smbb.txt | 19 ++++++
 drivers/power/supply/qcom_smbb.c                   | 70 ++++++++++++++++++++++
 2 files changed, 89 insertions(+)

-- 
2.10.0.297.gf6727b0

[PATCH v5 1/2] dt-binding: power: Add otg regulator binding

[Stephen Boyd]

From: "Bird, Tim" <Tim.Bird@sonymobile.com>

Add a binding for the regulator which controls the OTG chargepath switch.
The OTG switch gets its power from pm8941_5vs1, and that should be
expressed as a usb_otg_in-supply property in the DT node for the
charger driver.  The regulator name is "otg-vbus".

Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
 .../devicetree/bindings/power/supply/qcom_smbb.txt    | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
index 65b88fac854b..06f8a5ddb68e 100644
--- a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
+++ b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
@@ -105,6 +105,22 @@ PROPERTIES
                regulation must be done externally to fully comply with
                the JEITA safety guidelines if this flag is set.
 
+- usb_otg_in-supply:
+  Usage: optional
+  Value type: <phandle>
+  Description: Reference to the regulator supplying power to the USB_OTG_IN
+               pin.
+
+child nodes:
+- otg-vbus:
+  Usage: optional
+  Description: This node defines a regulator used to control the direction
+               of VBUS voltage - specifically: whether to supply voltage
+               to VBUS for host mode operation of the OTG port, or allow
+               input voltage from external VBUS for charging.  In the
+               hardware, the supply for this regulator comes from
+               usb_otg_in-supply.
+
 EXAMPLE
 charger@1000 {
        compatible = "qcom,pm8941-charger";
@@ -128,4 +144,7 @@ charger@1000 {
 
        qcom,fast-charge-current-limit = <1000000>;
        qcom,dc-charge-current-limit = <1000000>;
+       usb_otg_in-supply = <&pm8941_5vs1>;
+
+       otg-vbus {};
 };
-- 
2.10.0.297.gf6727b0

[PATCH v5 2/2] power: qcom_smbb: Add otg regulator for control of vbus

[Stephen Boyd]

From: "Bird, Tim" <Tim.Bird@sonymobile.com>

Add a regulator to control the OTG chargepath switch.  This
is used by USB code to control VBUS direction - out for host mode
on the OTG port, and in for charging mode.

Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
[stephen.boyd@linaro.org: Fix supply name, constify ops, drop
machine.h and of_regulator.h includes]
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
 drivers/power/supply/qcom_smbb.c | 70 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/drivers/power/supply/qcom_smbb.c b/drivers/power/supply/qcom_smbb.c
index b5896ba2a602..5bdde6108c12 100644
--- a/drivers/power/supply/qcom_smbb.c
+++ b/drivers/power/supply/qcom_smbb.c
@@ -35,6 +35,7 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/extcon.h>
+#include <linux/regulator/driver.h>
 
 #define SMBB_CHG_VMAX		0x040
 #define SMBB_CHG_VSAFE		0x041
@@ -72,6 +73,8 @@
 #define BTC_CTRL_HOT_EXT_N	BIT(0)
 
 #define SMBB_USB_IMAX		0x344
+#define SMBB_USB_OTG_CTL	0x348
+#define OTG_CTL_EN		BIT(0)
 #define SMBB_USB_ENUM_TIMER_STOP 0x34e
 #define ENUM_TIMER_STOP		BIT(0)
 #define SMBB_USB_SEC_ACCESS	0x3d0
@@ -125,6 +128,9 @@ struct smbb_charger {
 	struct power_supply *dc_psy;
 	struct power_supply *bat_psy;
 	struct regmap *regmap;
+
+	struct regulator_desc otg_rdesc;
+	struct regulator_dev *otg_reg;
 };
 
 static const unsigned int smbb_usb_extcon_cable[] = {
@@ -787,12 +793,56 @@ static const struct power_supply_desc dc_psy_desc = {
 	.property_is_writeable = smbb_charger_writable_property,
 };
 
+static int smbb_chg_otg_enable(struct regulator_dev *rdev)
+{
+	struct smbb_charger *chg = rdev_get_drvdata(rdev);
+	int rc;
+
+	rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+				OTG_CTL_EN, OTG_CTL_EN);
+	if (rc)
+		dev_err(chg->dev, "failed to update OTG_CTL\n");
+	return rc;
+}
+
+static int smbb_chg_otg_disable(struct regulator_dev *rdev)
+{
+	struct smbb_charger *chg = rdev_get_drvdata(rdev);
+	int rc;
+
+	rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+				OTG_CTL_EN, 0);
+	if (rc)
+		dev_err(chg->dev, "failed to update OTG_CTL\n");
+	return rc;
+}
+
+static int smbb_chg_otg_is_enabled(struct regulator_dev *rdev)
+{
+	struct smbb_charger *chg = rdev_get_drvdata(rdev);
+	unsigned int value = 0;
+	int rc;
+
+	rc = regmap_read(chg->regmap, chg->addr + SMBB_USB_OTG_CTL, &value);
+	if (rc)
+		dev_err(chg->dev, "failed to read OTG_CTL\n");
+
+	return !!(value & OTG_CTL_EN);
+}
+
+static const struct regulator_ops smbb_chg_otg_ops = {
+	.enable = smbb_chg_otg_enable,
+	.disable = smbb_chg_otg_disable,
+	.is_enabled = smbb_chg_otg_is_enabled,
+};
+
 static int smbb_charger_probe(struct platform_device *pdev)
 {
 	struct power_supply_config bat_cfg = {};
 	struct power_supply_config usb_cfg = {};
 	struct power_supply_config dc_cfg = {};
 	struct smbb_charger *chg;
+	struct regulator_config config = { };
 	int rc, i;
 
 	chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
@@ -905,6 +955,26 @@ static int smbb_charger_probe(struct platform_device *pdev)
 		}
 	}
 
+	/*
+	 * otg regulator is used to control VBUS voltage direction
+	 * when USB switches between host and gadget mode
+	 */
+	chg->otg_rdesc.id = -1;
+	chg->otg_rdesc.name = "otg-vbus";
+	chg->otg_rdesc.ops = &smbb_chg_otg_ops;
+	chg->otg_rdesc.owner = THIS_MODULE;
+	chg->otg_rdesc.type = REGULATOR_VOLTAGE;
+	chg->otg_rdesc.supply_name = "usb-otg-in";
+	chg->otg_rdesc.of_match = "otg-vbus";
+
+	config.dev = &pdev->dev;
+	config.driver_data = chg;
+
+	chg->otg_reg = devm_regulator_register(&pdev->dev, &chg->otg_rdesc,
+					       &config);
+	if (IS_ERR(chg->otg_reg))
+		return PTR_ERR(chg->otg_reg);
+
 	chg->jeita_ext_temp = of_property_read_bool(pdev->dev.of_node,
 			"qcom,jeita-extended-temp-range");
 
-- 
2.10.0.297.gf6727b0

Re: [PATCH v5 0/2] qcom OTG regulator support

[Stephen Boyd]

Hi Sebastian,

On Mon, Oct 17, 2016 at 5:42 PM, Stephen Boyd <stephen.boyd@linaro.org> wrote:
> This is a resend/resurrection of Tim's patches to add support
> for the OTG regulator on some of qcom's PMICs[1]. I've made
> some minor modifications to the driver to make it work, but
> otherwise it works fine with my USB otg testing. Changes
> are noted in a maintainer tag.
>
> Tim, did you want to me to fix the name? I pulled these from patchwork
> and it seems you sent it as "Bird, Tim" which may have not been
> intentional.
>

Can this be picked up for v4.11? Tim hasn't responded so I assume it's
fine with the name.

Re: [PATCH v5 0/2] qcom OTG regulator support

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 792 bytes --]

Hi Stephen,

On Wed, Dec 28, 2016 at 02:06:18PM -0800, Stephen Boyd wrote:
> On Mon, Oct 17, 2016 at 5:42 PM, Stephen Boyd <stephen.boyd@linaro.org> wrote:
> > This is a resend/resurrection of Tim's patches to add support
> > for the OTG regulator on some of qcom's PMICs[1]. I've made
> > some minor modifications to the driver to make it work, but
> > otherwise it works fine with my USB otg testing. Changes
> > are noted in a maintainer tag.
> >
> > Tim, did you want to me to fix the name? I pulled these from patchwork
> > and it seems you sent it as "Bird, Tim" which may have not been
> > intentional.
> >
> 
> Can this be picked up for v4.11? Tim hasn't responded so I assume it's
> fine with the name.

Yes, sorry for the delay. I just queued it.

-- Sebastian

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel