From: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Lawrence Yu <lyu-U6IdCoVonM7QT0dZR+AlfA@public.gmane.org>
Cc: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org,
maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
bonbons-ud5FBsm0p/xEiooADzr8i9i2O/JbrIOy@public.gmane.org
Subject: Re: [PATCH 1/1] power: axp20x_ac: Add support for ac power-supply on axp20x and axp22x pmics
Date: Wed, 26 Oct 2016 10:27:20 +0100 [thread overview]
Message-ID: <20161026092720.GN8574@dell> (raw)
In-Reply-To: <1474129243-10873-1-git-send-email-lyu-U6IdCoVonM7QT0dZR+AlfA@public.gmane.org>
On Sat, 17 Sep 2016, Lawrence Yu wrote:
> Add support for monitoring of ac power supply input. axp22x is the same
> as axp20x except it can not monitor voltage or current, only presence of
> power.
>
> This is mainly a copy of the existing axp20x_usb_power driver modified to
> use the ac power supply registers instead of the usb registers.
>
> axp20x tested on a generic A20 tablet.
> axp22x tested on an a33 ga10h-v1.1 tablet.
>
> Signed-off-by: Lawrence Yu <lyu-U6IdCoVonM7QT0dZR+AlfA@public.gmane.org>
> ---
> .../bindings/power_supply/axp20x_ac_power.txt | 35 ++++
> arch/arm/boot/dts/axp209.dtsi | 5 +
> arch/arm/boot/dts/axp22x.dtsi | 5 +
> drivers/mfd/axp20x.c | 11 ++
> drivers/power/Makefile | 1 +
> drivers/power/axp20x_ac_power.c | 219 +++++++++++++++++++++
Please split this patch up per-subsystem.
> 6 files changed, 276 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt
> create mode 100644 drivers/power/axp20x_ac_power.c
>
> diff --git a/Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt
> new file mode 100644
> index 0000000..d751cdc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt
> @@ -0,0 +1,35 @@
> +AXP20x AC power supply
> +
> +Required Properties:
> +-compatible: One of: "x-powers,axp202-ac-power-supply"
> + "x-powers,axp221-ac-power-supply"
> +
> +This node is a subnode of the axp20x PMIC.
> +
> +Example:
> +
> +axp209: pmic@34 {
> + compatible = "x-powers,axp209";
> + reg = <0x34>;
> + interrupt-parent = <&nmi_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + regulators {
> + x-powers,dcdc-freq = <1500>;
> +
> + vdd_cpu: dcdc2 {
> + regulator-always-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1450000>;
> + regulator-name = "vdd-cpu";
> + };
> +
> + ...
> + };
> +
> + ac-power-supply: ac-power-supply {
> + compatible = "x-powers,axp202-ac-power-supply";
> + };
> +};
> diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
> index 675bb0f..54e23c6 100644
> --- a/arch/arm/boot/dts/axp209.dtsi
> +++ b/arch/arm/boot/dts/axp209.dtsi
> @@ -97,6 +97,11 @@
> };
> };
>
> + ac_power_supply: ac_power_supply {
> + compatible = "x-powers,axp202-ac-power-supply";
> + status = "disabled";
> + };
> +
> usb_power_supply: usb_power_supply {
> compatible = "x-powers,axp202-usb-power-supply";
> status = "disabled";
> diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
> index 458b668..cdd5d4f 100644
> --- a/arch/arm/boot/dts/axp22x.dtsi
> +++ b/arch/arm/boot/dts/axp22x.dtsi
> @@ -148,6 +148,11 @@
> };
> };
>
> + ac_power_supply: ac_power_supply {
> + compatible = "x-powers,axp221-ac-power-supply";
> + status = "disabled";
> + };
> +
> usb_power_supply: usb_power_supply {
> compatible = "x-powers,axp221-usb-power-supply";
> status = "disabled";
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index ba130be..450d1a0 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -162,6 +162,12 @@ static struct resource axp20x_ac_power_supply_resources[] = {
> DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
> };
>
> +static struct resource axp22x_ac_power_supply_resources[] = {
> + DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
> + DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
> + DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
> +};
> +
> static struct resource axp20x_pek_resources[] = {
> {
> .name = "PEK_DBR",
> @@ -595,6 +601,11 @@ static struct mfd_cell axp22x_cells[] = {
> }, {
> .name = "axp20x-regulator",
> }, {
> + .name = "axp20x-ac-power-supply",
> + .of_compatible = "x-powers,axp221-ac-power-supply",
> + .num_resources = ARRAY_SIZE(axp22x_ac_power_supply_resources),
> + .resources = axp22x_ac_power_supply_resources,
> + }, {
> .name = "axp20x-usb-power-supply",
> .of_compatible = "x-powers,axp221-usb-power-supply",
> .num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources),
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index e46b75d..295ec0f 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o
>
> obj-$(CONFIG_PDA_POWER) += pda_power.o
> obj-$(CONFIG_APM_POWER) += apm_power.o
> +obj-$(CONFIG_AXP20X_POWER) += axp20x_ac_power.o
> obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o
> obj-$(CONFIG_MAX8925_POWER) += max8925_power.o
> obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
> diff --git a/drivers/power/axp20x_ac_power.c b/drivers/power/axp20x_ac_power.c
> new file mode 100644
> index 0000000..13bb093
> --- /dev/null
> +++ b/drivers/power/axp20x_ac_power.c
> @@ -0,0 +1,219 @@
> +/*
> + * AXP20x PMIC AC power supply status driver
> + *
> + * Copyright (C) 2015 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
> + * Copyright (C) 2014 Bruno Prémont <bonbons-ud5FBsm0p/xEiooADzr8i9i2O/JbrIOy@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#define DRVNAME "axp20x-ac-power-supply"
> +
> +#define AXP20X_PWR_STATUS_ACIN_PRESENT BIT(7)
> +#define AXP20X_PWR_STATUS_ACIN_USED BIT(6)
> +#define AXP20X_ADC_EN1_ACIN_CURR BIT(4)
> +#define AXP20X_ADC_EN1_ACIN_VOLT BIT(5)
> +
> +struct axp20x_ac_power {
> + struct device_node *np;
> + struct regmap *regmap;
> + struct power_supply *supply;
> +};
> +
> +static irqreturn_t axp20x_ac_power_irq(int irq, void *devid)
> +{
> + struct axp20x_ac_power *power = devid;
> +
> + power_supply_changed(power->supply);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int axp20x_ac_power_get_property(struct power_supply *psy,
> + enum power_supply_property psp, union power_supply_propval *val)
> +{
> + struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
> + unsigned int input;
> + int ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + ret = axp20x_read_variable_width(power->regmap,
> + AXP20X_ACIN_V_ADC_H, 12);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret * 1700; /* 1 step = 1.7 mV */
> + return 0;
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + ret = axp20x_read_variable_width(power->regmap,
> + AXP20X_ACIN_I_ADC_H, 12);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = ret * 625; /* 1 step = 0.375 mA */
> + return 0;
> + default:
> + break;
> + }
> +
> + /* All the properties below need the input-status reg value */
> + ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input);
> + if (ret)
> + return ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_PRESENT:
> + val->intval = !!(input & AXP20X_PWR_STATUS_ACIN_PRESENT);
> + break;
> + case POWER_SUPPLY_PROP_ONLINE:
> + val->intval = !!(input & AXP20X_PWR_STATUS_ACIN_USED);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static enum power_supply_property axp20x_ac_power_properties[] = {
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> +};
> +
> +static enum power_supply_property axp22x_ac_power_properties[] = {
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_ONLINE,
> +};
> +
> +static const struct power_supply_desc axp20x_ac_power_desc = {
> + .name = "axp20x-ac",
> + .type = POWER_SUPPLY_TYPE_MAINS,
> + .properties = axp20x_ac_power_properties,
> + .num_properties = ARRAY_SIZE(axp20x_ac_power_properties),
> + .get_property = axp20x_ac_power_get_property,
> +};
> +
> +static const struct power_supply_desc axp22x_ac_power_desc = {
> + .name = "axp20x-ac",
> + .type = POWER_SUPPLY_TYPE_MAINS,
> + .properties = axp22x_ac_power_properties,
> + .num_properties = ARRAY_SIZE(axp22x_ac_power_properties),
> + .get_property = axp20x_ac_power_get_property,
> +};
> +
> +static int axp20x_ac_power_probe(struct platform_device *pdev)
> +{
> + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> + struct power_supply_config psy_cfg = {};
> + struct axp20x_ac_power *power;
> + static const char * const axp20x_irq_names[] = {
> + "ACIN_PLUGIN", "ACIN_REMOVAL", NULL };
> + static const char * const axp22x_irq_names[] = {
> + "ACIN_PLUGIN", "ACIN_REMOVAL", NULL };
> + static const char * const *irq_names;
> + const struct power_supply_desc *ac_power_desc;
> + int i, irq, ret;
> +
> + if (!of_device_is_available(pdev->dev.of_node))
> + return -ENODEV;
> +
> + if (!axp20x) {
> + dev_err(&pdev->dev, "Parent drvdata not set\n");
> + return -EINVAL;
> + }
> +
> + power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
> + if (!power)
> + return -ENOMEM;
> +
> + power->np = pdev->dev.of_node;
> + power->regmap = axp20x->regmap;
> +
> + if (of_device_is_compatible(power->np,
> + "x-powers,axp202-ac-power-supply")) {
> +
> + /* Enable acin voltage and current measurement */
> + ret = regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
> + AXP20X_ADC_EN1_ACIN_CURR | AXP20X_ADC_EN1_ACIN_VOLT,
> + AXP20X_ADC_EN1_ACIN_CURR | AXP20X_ADC_EN1_ACIN_VOLT);
> + if (ret)
> + return ret;
> +
> + ac_power_desc = &axp20x_ac_power_desc;
> + irq_names = axp20x_irq_names;
> + } else if (of_device_is_compatible(power->np,
> + "x-powers,axp221-ac-power-supply")) {
> + ac_power_desc = &axp22x_ac_power_desc;
> + irq_names = axp22x_irq_names;
> + } else {
> + dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
> + axp20x->variant);
> + return -EINVAL;
> + }
> +
> + psy_cfg.of_node = pdev->dev.of_node;
> + psy_cfg.drv_data = power;
> +
> + power->supply = devm_power_supply_register(&pdev->dev, ac_power_desc,
> + &psy_cfg);
> + if (IS_ERR(power->supply))
> + return PTR_ERR(power->supply);
> +
> + /* Request irqs after registering, as irqs may trigger immediately */
> + for (i = 0; irq_names[i]; i++) {
> + irq = platform_get_irq_byname(pdev, irq_names[i]);
> + if (irq < 0) {
> + dev_warn(&pdev->dev, "No IRQ for %s: %d\n",
> + irq_names[i], irq);
> + continue;
> + }
> + irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
> + ret = devm_request_any_context_irq(&pdev->dev, irq,
> + axp20x_ac_power_irq, 0, DRVNAME, power);
> + if (ret < 0)
> + dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n",
> + irq_names[i], ret);
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id axp20x_ac_power_match[] = {
> + { .compatible = "x-powers,axp202-ac-power-supply" },
> + { .compatible = "x-powers,axp221-ac-power-supply" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(of, axp20x_ac_power_match);
> +
> +static struct platform_driver axp20x_ac_power_driver = {
> + .probe = axp20x_ac_power_probe,
> + .driver = {
> + .name = DRVNAME,
> + .of_match_table = axp20x_ac_power_match,
> + },
> +};
> +
> +module_platform_driver(axp20x_ac_power_driver);
> +
> +MODULE_AUTHOR("Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>");
> +MODULE_DESCRIPTION("AXP20x PMIC AC power supply status driver");
> +MODULE_LICENSE("GPL");
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
prev parent reply other threads:[~2016-10-26 9:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-17 16:20 [PATCH 1/1] power: axp20x_ac: Add support for ac power-supply on axp20x and axp22x pmics Lawrence Yu
[not found] ` <1474129243-10873-1-git-send-email-lyu-U6IdCoVonM7QT0dZR+AlfA@public.gmane.org>
2016-10-26 9:27 ` Lee Jones [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161026092720.GN8574@dell \
--to=lee.jones-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=bonbons-ud5FBsm0p/xEiooADzr8i9i2O/JbrIOy@public.gmane.org \
--cc=dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=lyu-U6IdCoVonM7QT0dZR+AlfA@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).